One of the most important factors that influences the performance of geomorphologic parameters on urban lakes is the water level. It fluctuates periodically, causing shoreline changes. It is especially significant for typical environmental studies like bathymetric surveys, morphometric parameters calculation, sediment depth changes, thermal structure, water quality monitoring, etc. In most reservoirs, it can be obtained from digitized historical maps or plans or directly measured using the instruments such as: geodetic total station, GNSS receivers, UAV with different sensors, satellite and aerial photos, terrestrial and airborne light detection and ranging, or others. Today one of the most popular measuring platforms, increasingly applied in many applications is UAV. Unmanned aerial system can be a cheap, easy to use, on-demand technology for gathering remote sensing data. Our study presents a reliable methodology for shallow lake shoreline investigation with the use of a low-cost fixed-wing UAV system. The research was implemented on a small, eutrophic urban inland reservoir located in the northern part of Poland—Lake Suskie. The geodetic TS, and RTK/GNSS measurements, hydroacoustic soundings and experimental aerial mapping were conducted by the authors in 2012–2015. The article specifically describes the UAV system used for experimental measurements, the obtained results and the accuracy analysis. Final conclusions demonstrate that even a low-cost fixed-wing UAV can provide an excellent tool for accurately surveying a shallow lake shoreline and generate valuable geoinformation data collected definitely faster than when traditional geodetic methods are employed.

Unmanned Aerial Systems (UAS) are widely used in low-cost photogrammetry. Even small Unmanned Aerial Vehicles (UAV) can deliver valuable data for the inventory of inaccessible and dangerous areas or objects. The acquisition of data for 3D object modeling is a complicated, time-consuming, and cost-intensive process. It requires the use of expensive equipment and often manual work as well as professional software. These are major barriers limiting the development of modern tourist platforms that promote local attractions. Information technologies offer new opportunities for the development of the services market, including the development of smart tourism services, as an integral part of the smart city concept. 3D models are an important element of this process as they form the basis for the use of new visualization technologies, such as Virtual, Mixed, and Augmented Reality (VR/MR/AR). 3D modeling provides a new opportunity to use AR/MR technology to present information about objects, virtual tours of the historic buildings, and their promotion. It also creates an opportunity to preserve the architectural heritage and preventive maintenance of buildings. Despite the increasing use of new measuring platforms and computer modeling techniques, the implementation of 3D building models in smart tourism services is still limited, focusing more on the results of scientific projects rather than on the implementation of the new ones. The paper presents an universal methodology for the inventory of historical buildings using low-cost UAVs. It describes the most important aspects related to the process of planning UAV measurement missions and photogrammetric data acquisition. The construction of 3D models and the possibilities of their further use to build smart tourism services based on Web/AR/MR/VR technology was also presented.

The aim of this research is to propose a new solution to assist sailors in safe navigation on inland shallow waters by using Augmented and Virtual Reality. Despite continuous progress in the methodology of displaying bathymetric data and 3D models of the bottoms, there is still a lack of solutions promoting these data and their widespread use. Most existing products present navigation content on 2D/3D maps onscreen. Augmented Reality (AR) technology revolutionises the way digital content is displayed. This paper presents the solution for the use of AR on inland and coastal waterways to increase the safety of sailing and other activities on the water (diving, fishing, etc.). The real-time capability of AR in the proposed mobile application also allows other users to be observed on the water in limited visibility and even at night. The architecture and the prototype Mobile Augmented Reality (MAR) applications are presented. The required AR, including the preparation methodology supported by the Virtual Reality Geographic Information System (VRGIS), is also shown. The prototype’s performance has been validated in water navigation, specifically for exemplary lakes of Warmia and Mazury in Poland. The performed tests showed the great usefulness of AR in the field of content presentation during the navigation process.

Most of the inland lakes do not have up-to-datebathymetry. However, a significant progress in surveyingtechnologies creates a possibility to quickly and accuratelydescribe the underwater environment. Modern geodeticand global positioning techniques integrated with hydroacousticsystems provide a great opportunity to study thebottom shape with high resolution. Our study presentsa reliable methodology for investigation of bathymetryand morphometric parameters with the use of GNSS positioningtechniques and single beam echosounder. Theresearch was implemented on the deepest, glacial reservoirin the central part of European Depression - LakeHancza. Direct hydroacoustic and geodetic measurementscompleted by sediment study were conducted by the authorsin 2010-2013. After performing a field survey the DigitalElevation Model was constructed and the new bathymetricmap and morphometric card were elaborated. Themaximum depth was confirmed to be 105.55 m. The finalconclusions show that the available bathymetric data andmorphometric parameters of lakes are highly dependenton the research methodology used, the precision and accuracyof measurement techniques, proper water level determination,digital elevation model and bathymetric mapelaboration processes.

We investigated changes in the spatial distribution of phosphorus (P) and nitrogen (N) in the deep, mesotrophic Lake Hańcza. The raw data collection, supported by global navigation satellite system (GNSS) positioning, was conducted on 79 sampling points. A geostatistical method (kriging) was applied in spatial interpolation. Despite the relatively small area of the lake (3.04 km2), compact shape (shore development index of 2.04) and low horizontal exchange of water (retention time 11.4 years), chemical gradients in the surface waters were found. The largest variation concerns the main biogenic element – phosphorus. The average value was 0.032 at the extreme values of 0.019 to 0.265 mg L−1 (coefficient of variation 87%). Smaller differences are related to nitrogen compounds (0.452–1.424 mg L−1 with an average value of 0.583 mg L−1, the coefficient of variation 20%). The parts of the lake which are fed with tributaries are the richest in phosphorus. The water quality of the oligo-mesotrophic Lake Hańcza has been deteriorating in recent years. Our results indicate that inferences about trends in the evolution of examined lake trophic status should be based on an analysis of the data, taking into account the local variation in water chemistry.