Storm drains and sanitary sewers are prone to backups and overflows due to extra amount wastewater entering the pipes. To prevent that, it is imperative to efficiently monitor the urban underground infrastructure. The combination of sensors system and wireless underground communication system can be used to realize urban underground IoT applications, e.g., storm water and wastewater overflow monitoring systems. The aim of this article is to establish a feasibility of the use of wireless underground communications techniques, and wave propagation through the subsurface soil and asphalt layers, in an underground pavement system for storm water and sewer overflow monitoring application. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. The dielectric properties of asphalt, sub-grade aggregates, and soil are considered in the path loss analysis for the path loss prediction in an underground sewer overflow and wastewater monitoring system design. It has been shown that underground transmitter was able to communicate through thick asphalt (10 cm) and soil layers (20 cm) for a long range of up to 4 km.

Energy efficiency is vital for uninterrupted long-term operation of wireless underground communication nodes in the field of decision agriculture. In this paper, energy harvesting and wireless power transfer techniques are discussed with applications in underground wireless communications (UWC). Various external wireless power transfer techniques are explored. Moreover, key energy harvesting technologies are presented that utilize available energy sources in the field such as vibration, solar, and wind. In this regard, the Electromagnetic (EM)- and Magnetic Induction (MI)-based approaches are explained. Furthermore, the vibration-based energy harvesting models are reviewed as well. These energy harvesting approaches lead to design of an efficient wireless underground communication system to power underground nodes for prolonged field operation in decision agriculture.

This paper studies a WiFi indoor localisation technique based on using a deep learning model and its transfer strategies. We take CSI packets collected via the WiFi standard channel sounding as the training dataset and verify the CNN model on the subsets collected in three experimental environments. We achieve a localisation accuracy of 46.55 cm in an ideal (6.5m × 2.5m) office with no obstacles, 58.30 cm in an office with obstacles, and 102.8 cm in a sports hall (40 × 35m). Then, we evaluate the transfer ability of the proposed model to different environments. The experimental results show that, for a trained localisation model, feature extraction layers can be directly transferred to other models and only the fully connected layers need to be retrained to achieve the same baseline accuracy with non-transferred base models. This can save 60% of the training parameters and reduce the training time by more than half. Finally, an ablation study of the training dataset shows that, in both office and sport hall scenarios, after reusing the feature extraction layers of the base model, only 55% of the training data is required to obtain the models’ accuracy similar to the base models.

Wireless Underground Communication (WUC) is an emerging field that is being developed continuously. It provides secure mechanism of deploying nodes underground which shields them from any outside temperament or harsh weather conditions. This paper works towards introducing WUC and give a detail overview of WUC. It discusses system architecture of WUC along with the anatomy of the underground sensor motes deployed in WUC systems. It also compares Over-the-Air and Underground and highlights the major differences between the both type of channels. Since, UG communication is an evolving field, this paper also presents the evolution of the field along with the components and example UG wireless communication systems. Finally, the current research challenges of the system are presented for further improvement of the WUCs.

Energy autonomy and system lifetime are critical concerns in wireless sensor networks (WSNs), for which energy harvesting (EH) is emerging as a promising solution. Nevertheless, the tools supporting the design of EH-WSNs are limited to a few simulators that require developers to re-implement the application with programming languages different from WSN ones. Further, simulators notoriously provide only a rough approximation of the reality of low-power wireless communication. In this paper we present SENSEH, a software framework that allows developers to move back and forth between the power and speed of a simulated approach and the reality and accuracy of in-field experiments. SENSEH relies on COOJA for emulating the actual, deployment-ready code, and provides two modes of operation that allow the reuse of exactly the same code in real-world WSN deployments. We describe the toolchain and software architecture of SENSEH, and demonstrate its practical use and benefits in the context of a case study where we investigate how the lifetime of a WSN used for adaptive lighting in road tunnels can be extended using harvesters based on photovoltaic panels.