The development of materials with hydrophobic properties has been widely explored in areas such as textiles, healthcare, sports, and personal protective equipment. Hydrophobic properties that arise from nanoparticles (nPs) directly promote other valuable properties, including self-cleaning capabilities, decreased bacterial growth, and increased comfort. In this study, biodegradable poly(ε-caprolactone) (PCL) nanofibers were functionalized by the incorporation of titanium dioxide (TiO₂) nPs to develop water-repellent materials. The membranes were produced through electrospinning, and variables such as the polymer concentration, nP concentration, and needle diameter were optimized to achieve PCL/TiO₂ composite fibers with water-repellent capabilities. The nanofibers were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and the water contact angle (WCA). In general, it was observed that the nanofibers presented higher roughness values when TiO₂ nPs were present and that this result promoted higher WCA values. The highest WCA value (156°) was obtained for the nanofiber mat produced with 20% weight-to-volume (w/v) PCL and 0.6% (w/v) TiO₂.

Bioresources have been gaining popularity due to their abundance, renewability, and recyclability. Nevertheless, given their diverse composition and complex hierarchical structures, these bio-based sources must be carefully processed to effectively extract valuable raw polymeric materials suitable for producing man-made organic fibres. This review will first highlight the most relevant bio-based sources, with a particular focus on promising unconventional biomass sources (terrestrial vegetables, aquatic vegetables, fungi, and insects), as well as agroforestry and industrial biowaste (food, paper/wood, and textile). For each source, typical applications and the biopolymers usually extracted will also be outlined. Furthermore, acknowledging the challenging lignocellulosic structure and composition of these sources, an overview of conventional and emerging pre-treatments and extraction methods, namely physical, chemical, physicochemical, and biological methodologies, will also be presented. Additionally, this review aims to explore the applications of the compounds obtained in the production of man-made organic fibres (MMOFs). A brief description of their evolution and their distinct properties will be described, as well as the most prominent commercial MMOFs currently available. Ultimately, this review concludes with future perspectives concerning the pursuit of greener and sustainable polymeric sources, as well as effective extraction processes. The potential and main challenges of implementing these sources in the production of alternative man-made organic fibres for diverse applications will also be highlighted.

As the incidence of small-diameter particles in the air has increased in recent decades, the development of efficient filtration systems is both urgent and necessary. Nanotechnology, more precisely, electrospun nanofibres, has been identified as a potential solution for this issue, since it allows for the production of membranes with high rates of fibres per unit area, increasing the probability of nanoparticle collision and consequent retention. In the present study, the electrospinning technique of polyamide nanofibre production was optimized with the variation of parameters such as polymer concentration, flow rate and needle diameter. The optimized polyamide nanofibres were combined with polypropylene and polyester microfibres to construct a multilayer and multiscale system with an increased filtration efficiency. We observed that the penetration value of the multilayer system with a PA membrane in the composition, produced for 20 min in the electrospinning, is 2.7 times smaller than the penetration value of the system with the absence of micro and nano fibers.

The development of advanced facemasks stands out as a paramount priority in enhancing healthcare preparedness. In this work, different polypropylene non-woven fabrics (NWF) were characterised regarding their structural, physicochemical and comfort-related properties. The selected NWF for the intermediate layer was functionalised with zinc oxide nanoparticles (ZnO NPs) 0.3 and 1.2wt% using three different methods: electrospinning, dip-pad-dry and exhaustion. After the confirmation of ZnO NP content and distribution within the textile fibres by morphological and chemical analysis, the samples were evaluated regarding their antimicrobial properties. The functionalised fabrics obtained via dip-pad-dry unveiled the most promising data, with 0.017 ± 0.013wt% ZnO NPs being mostly located at the fibre’s surface and capable of total eradication of Staphylococcus aureus and Escherichia coli colonies within the tested 24 h (ISO 22196 standard), as well as significantly contributing (**** p < 0.0001) to the growth inhibition of the bacteriophage MS2, a surrogate of the SARS-CoV-2 virus (ISO 18184 standard). A three-layered structure was assembled and thermoformed to obtain facemasks combining the previously chosen NWF, and its resulting antimicrobial capacity, filtration efficiency and breathability (NP EN ISO 149) were assessed. The developed three-layered and multiscaled fibrous structures with antimicrobial capacities hold immense potential as active individual protection facemasks.

Low-velocity impact can cause serious damage to the person or structure that is hit. The development of barriers that can absorb the energy of the impact and, therefore, protect the other side of the impact is the ideal solution for the pointed situation. Auxetic materials and shear thickening fluids are two types of technologies that have great capabilities to absorb high levels of energy when an impact happens. Accordingly, within this study, the combination of auxetic knits with shear thickening fluids by the pad-dry-cure process was investigated. It was observed that, by applying knits with auxetic patterns produced with denser materials and combined with the shear thickening fluids, high performance in terms of absorbed energy from puncture impact is obtained. The increment rates obtained are higher than 100% when comparing the structures with and without shear thickening fluids.

Chemical protective clothing (CPC) has become mandatory when performing various tasks to ensure user protection and prevent chemicals from contacting the skin and causing severe injuries. In addition to protection, there is a need to develop a simple mechanism that can be attached to CPC and be capable of detecting and alerting the user to the presence of harmful chemical agents. In this study, a double-sensor strategy was investigated, using six different pH indicators stamped on cotton and polyester knits to detect acidic and alkaline substances, both liquid and gaseous. Functionalized knits underwent microscopic characterization, air permeability and contact angle evaluation. All samples exhibited hydrophobic behavior (contact angle > 90°) and air permeability values above 2400 L/min/cm²/bar, with the best condition demonstrating a contact angle of 123° and an air permeability of 2412.5 L/min/cm²/bar when the sensor methyl orange and bromocresol purple (MO:BP) was stamped on polyester. The performed tests proved the functionality of the sensors and showed a visible response of all knits when contacting with different chemicals (acids and bases). Polyester functionalized with MO:BP showed the greatest potential, due to its preeminent color change. Herein, the fiber coating process was optimized, enabling the industrial application of the sensors via a stamping method, an alternative to other time- and resource-consuming techniques.