A tri-axis magnetometer comprising three giant-magnetoresistance sensors and a cylindrical fluxguide are implemented for compass application. The sensors are mounted on a single printed circuit board (PCB) board with their sensing axes in a plane. A calibration process involving matrix manipulation was employed to make the device function as a tri-axis magnetometer with orthogonal sensing directions. The capability of the device for compass application was demonstrated by measuring its azimuth response to the geomagnetic field about different rotation axes. The proposed calibration technique can be used for the magnetometer system with either orthogonal or non-orthogonal sensor arrangement.
The high-noise level at low frequency in magnetic tunnel junction (MTJ) sensors is the key problem for their applications in measuring the low values of static magnetic field. In this paper, we investigated a shielding-type flux chopper to resolve the 1/f noise issue. By the using a cylindrical chopper with its axis perpendicular to the sensing direction of MTJ sensor, the noise at 1 Hz was reduced from 4 to 0.3 nT/√Hz by chopping the magnetic flux at 5 kHz. The reduction in noise can be qualitatively explained by the 1/f behavior and the chopping efficiency. The proposed method is promising in enhancing the detectivity of MTJ sensor for sensing the static geomagnetic field.
26 January 2017 in IEEE Transactions on Nanotechnology
Nanomagnetism deals with magnetic phenomena in nanoscale structures, involving processes at the atomic level. Magnetic sensors, which exhibit the surprising giant magnetoresistance (GMR) effect, are some of the first real applications of nanotechnology, and have become very important in the last two decades. In addition, high-performance magnetoresistance (MR) measurement is a critical technique in modern electrical applications, including electronic compasses, aviation navigation, motion tracking, noncontact current sensing, rotation sensing, and vehicle detection. Both GMR and tunneling magnetoresistance (TMR) sensors have been used in the state-of-art electronic compasses. A new planar design layout of a vector magnetometer is proposed in this report. It can sense variations in three-dimensional (3-D) magnetic fields. The planarization of a vector magnetometer is carried out with consideration of materials, magnetic schematics, as well as transducer circuit designs. The optimization of an advanced magnetic material for use in GMR and TMR sensors and its planarization in a 3-D design are crucial practical issues. This paper presents an overview of the planarization of vector magnetometers and the development of its applications. It focuses on recent works, covers an analytic model of magnetoresistive sensors, and methods of thin film fabrication. It also addresses the planar vector magnetometer with a flux-guide, the chopping technique, and techniques for microfabrication of substrates. Planarization in magnetic sensors will become increasingly exploited as nanomagnetism grows in importance.
An aircraft is a multilayer structure that is assembled by rivets. Under extreme working conditions, corrosion appears and quickly propagates at the rivet sites of the layers; thus, it threads the integrity and safety of the aircraft. Corrosion usually occurs at the hidden layer around the rivet, making it difficult to detect. This paper proposes a machine learning approach incorporating an electromagnetic testing system to detect the hidden corrosion at the riveting site effectively. Several machine learning methods will be investigated for the detection of different sizes and locations of corrosion. The training strategy of the machine-learning models on the small numbers of data will also be investigated. The result shows that the proposed approach could effectively detect 89.48% of the hidden corrosion having from 2.8 to 195.4 mm3 with only 20% of training data and could be increased to 99.0% with 60–80% of the training data.