Positioning in indoor environment is one of the most important and interesting topic in navigation system that still present numerous open problems to investigate. Many researchers are attempting to investigate on technologies able to reach valid location in an indoor space, where the well-known GNSS positioning systems are not able to operate. Among the many solutions proposed for location-based services, several wireless communications technologies have the potential to be employed for indoor positioning. In this paper, an Ultrawideband (UWB) indoor positioning commercial system is presented which exploits two-way time of flight (TWTF) to compute range measurements. These measurements are used in multi-lateration method to compute the position of a trans-receiver (TAG). Firstly, the calibration results have been shown, comparing the internal IMU sensor of UWB system with a mass-market one, using the angles measured thanks to the total station as reference. Secondly, we also have statically analysed the positioning and the ranging capabilities of the system in a favourable environment, as an indoor office room. The average 3D accuracy obtained from the test is 100 ± 25mm. Also the ranging measurements has been analysed as the raw data from which the Pozyx® inner algorithm starts to compute the positions. It has been demonstrated that the range accuracy is about 320 ± 30mm. After these first tests, the system has also been tested in a harsh environment in a narrow corridor where a horizontal accuracy of about 87.4 mm is obtained with a maximum ranging error of ±225 mm. The system and algorithms tested in this report gave almost similar performances in both environments.

Global Navigation Satellite System (GNSS) positioning is currently a common practice thanks to the development of mobile devices such as smartphones and tablets. The possibility to obtain raw GNSS measurements, such as pseudoranges and carrier-phase, from these instruments has opened new windows towards precise positioning using smart devices. This work aims to demonstrate the positioning performances in the case of a typical single-base Real-Time Kinematic (RTK) positioning while considering two different kinds of multi-frequency and multi-constellation master stations: a typical geodetic receiver and a smartphone device. The results have shown impressive performances in terms of precision in both cases: with a geodetic receiver as the master station, the reachable precisions are several mm for all 3D components while if a smartphone is used as the master station, the best results can be obtained considering the GPS+Galileo constellations, with a precision of about 2 cm both for 2D and Up components in the case of L1+L5 frequencies, or 3 cm for 2D components and 2 cm for the Up, in the case of an L1 frequency. Moreover, it has been demonstrated that it is not feasible to reach the phase ambiguities fixing: despite this, the precisions are still good and also the obtained 3D accuracies of positioning solutions are less than 1 m. So, it is possible to affirm that these results are very promising in the direction of cooperative positioning using smartphone devices.

The growth of location-based services (LBS) has increased rapidly in last years, mainly due to the possibility to exploit low-cost sensors installed in portable devices, such as smartphones and tablets. This work aims to show a low-cost multi-sensor platform developed by the authors in which an ultra-wideband (UWB) indoor positioning system is added to a classical global navigation satellite systems–inertial navigation system (GNSS-INS) integration, in order to acquire different synchronized data for further data fusion analysis in order to exploit seamless positioning. The data fusion is based on an extended Kalman filter (EKF) and on a geo-fencing approach which allows the navigation solution to be provided continuously. In particular, the proposed algorithm aims to solve a navigation task of a pedestrian user moving from an outdoor space to an indoor environment. The methodology and the system setup is presented with more details in the paper. The data acquired and the real-time positioning estimation are analysed in depth and compared with ground truth measurements. Particular attention is given to the UWB positioning system and its behaviour with respect to the environment. The proposed data fusion algorithm provides an overall horizontal and 3D accuracy of 35 cm and 45 cm, respectively, obtained considering 5 different measurement campaigns.

In the present work, three LiDAR technologies (Faro Focus 3D X130—Terrestrial Laser Scanner, TLS-, Kaarta Stencil 2–16—Mobile mapping system, MMS-, and DJI Zenmuse L1—Airborne LiDAR sensor, ALS-) have been tested and compared in order to assess the performances in surveying built heritage in vegetated areas. Each of the mentioned devices has their limits of usability, and different methods to capture and generate 3D point clouds need to be applied. In addition, it has been necessary to apply a methodology to be able to position all the point clouds in the same reference system. While the TLS scans and the MMS data have been geo-referenced using a set of vertical markers and sphere measured by a GNSS receiver in RTK mode, the ALS model has been geo-referenced by the GNSS receiver integrated in the unmanned aerial system (UAS), which presents different characteristics and accuracies. The resulting point clouds have been analyzed and compared, focusing attention on the number of points acquired by the different systems, the density, and the nearest neighbor distance.

The access and the use of the global navigation satellite system (GNSS) pseudo-range and carrier-phase measurements mobile devices as smartphones and tablets with an Android operating system has transformed the concept of accurate positioning with mobile devices. In this work, the comparison of positioning performances obtained with a smartphone and an external mass-market GNSS receiver both in real-time and post-processing is made. Particular attention is also paid to accuracy and precision of positioning results, also analyzing the possibility of estimating the phase ambiguities as integer values (fixed positioning) that it is still challenging for mass-market devices. The precisions and accuracies obtained with the mass-market receiver were about 5 cm and 1 cm both for real-time and post-processing solutions, respectively, while those obtained with a smartphone were slightly worse (few meters in some cases) due to the noise of its measurements.