The environmental impact of aviation in terms of noise and pollutant emissions has gained public attention in the last few years. In addition, the foreseen financial benefits of an increased energy efficiency have motivated the transport industry to invest in propulsion alternatives. This work is collocated within the Clean Sky 2 project GENESIS, focused on the environmental sustainability of 50-passenger hybrid-electric aircraft from a life-cycle-based perspective to support the development of a technology roadmap for transitioning towards sustainable and competitive electric aircraft systems. While several studies have already focused on the definition of possible aircraft designs combining several propulsion systems, the novelty of the present work is to consider technology forecasts and more comprehensive indicators in the design phase. These include the performance and emissions on a 200 nmi typical mission, which reflects the most economically attractive range for aircraft in the regional class. The work proposes a complete exploration of three major technology streams for energy storage: batteries, fuel cells, and turbine internal combustion engine generators, also including possible combinations of those technologies. The exploration was carried out through the execution of several designs of experiments aiming at the identification of the most promising solutions in terms of aircraft configuration for three different time horizons: short-term, 2025–2035; medium-term, 2035–2045; and long-term, 2045–2050+. As a result, in the short-term scenario, fuel energy consumption is estimated to be reduced by around 24% with respect to conventional aircraft with the same entry-into-service year thanks to the use of hybrid propulsive systems with lithium batteries. Fuel saving increases to 45% in the medium-term horizon due to the improvement in the energy density of storage systems. By the year 2050, when hydrogen fuel cells are estimated to be mature enough to completely replace kerosene-based engines, the forthcoming hybrid-electric aircraft promise no NOx and CO2 direct emissions, while being approximately 50% heavier than conventional ones.
This paper proposes a feasibility study concerning a large turboprop aircraft to be used as a lower environmental impact solution to current regional jets operated on short/medium hauls. An overview of this market scenario highlights that this segment is evenly shared between regional turboprop and jet aircraft. Although regional jets ensure a large operative flexibility, they are usually not optimized for short missions with a negative effect on block fuel and environmental impact. Conversely, turboprops represent a greener solution but with reduced passenger capacity and speed. Those aspects highlight a slot for a new turboprop platform coupling higher seat capacity, cruise speed and design range with a reduced fuel consumption. This platform should operate on those ranges where neither jet aircraft nor existing turboprops are optimized. This work compares three different solutions: a high-wing layout with under-wing engines installation and both two- and three-lifting-surface configurations with low-wing and tail tips-mounted engines. For each concept, a multi-disciplinary optimization was performed targeting the minimum block fuel on a 1600 NM mission. Optimum solutions were compared with both a regional jet such as the Airbus A220-300 operated on 1600 NM and with a jet aircraft specifically designed for this range.
A simulation-based approach for take-off and landing performance assessments is presented in this work. In the context of aircraft design loops, it provides a detailed and flexible formulation that can be integrated into a wider simulation methodology for a complete commercial aviation mission. As a matter of fact, conceptual and preliminary aircraft design activities require iterative calculations to quickly make performance predictions on a set of possible airplane configurations. The goal is to search for a design that best fits all top level aircraft requirements among the results of a great number of multi-disciplinary analyses, as fast as possible, and with a certain grade of accuracy. Usually, such a task is carried out using statistical or semi-empirical approaches which can give pretty accurate results in no time. However, those prediction methods may be inappropriate when dealing with innovative aircraft configurations or whenever a higher level of accuracy is necessary. Simulation-based design has become crucial to make the overall process affordable and effective in cases where higher fidelity analyses are required. A common example when flight simulations can be effectively used to support a design loop is given by aircraft mission analyses and performance predictions. These usually include take-off, climb, en route, loiter, approach, and landing simulations. This article introduces the mathematical models of aircraft take-off and landing and gives the details of how they are implemented in the software library JPAD. These features are not present in most of the currently available pieces of preliminary aircraft design software and allow one to perform high fidelity, simulation-based take-off and landing analyses within design iterations. Although much more detailed than classical semi-empirical approaches, the presented methodologies require very limited computational effort. An application of the proposed formulations is introduced in the second part of the article. The example considers the Airbus A220-300 as a reference aircraft model and includes complete take-off and landing performance studies, as well as the simulation of both take-off and landing certification noise trajectories.
3 July 2017 in Aircraft Engineering and Aerospace Technology
Purpose: This paper aims to introduce the take-off and landing performance analysis modules of the software library named Java toolchain of Programs for Aircraft Design (JPAD), dedicated to the aircraft preliminary design. An overview of JPAD is also presented. Design/methodology/approach: The calculation of the take-off and landing distances has been implemented using a simulation-based approach. This expects to solve an appropriate set of ordinary differential equations, which describes the aircraft equations of motion during all the take-off and landing phases. Tests upon two aircraft models (ATR72 and B747-100B) have been performed to compare the obtained output with the performance data retrieved from the related flight manuals. Findings: The tool developed has proven to be very reliable and versatile, as it performs the calculation of the required performance with almost no computational effort and with a good accuracy, providing a less than the 5 per cent difference with respect to the statistical trend and a difference from the flight manual or public brochure data around 10 per cent. Originality/value: The use of a simulation-based approach to have a more accurate estimation of the ground performance with respect to classic semi-empirical equations. Although performing the simulation of the aircraft motion, the approach shown is very time-saving and can be easily implemented in an optimization cycle.