In this work, the microstructure, phase state, texture, superelastic and mechanical properties of a Ti–18Zr–15Nb (at. %) shape memory alloy subjected to a combined thermomechanical treatment, including hot rotary forging with either air cooling or water quenching and post-deformation annealing are studied. It was revealed that the main structural component of the deformed and annealed alloy is BCC β-phase. With an increase in the forging temperature from 600 to 700 °C, the average grain size increases from 5.4 to 17.8 µm for the air-cooled specimens and from 3.4 to 14.7 µm for the water-quenched specimens. Annealing at 525 °C after forging at 700 °C with water quenching leads to the formation of a mixed statically and dynamically polygonized substructure of β-phase. In this state, the alloy demonstrates the best combination of functional properties in this study: a Young’s modulus of ~33 GPa, an ultimate tensile strength of ~600 MPa and a superelastic recovery strain of ~3.4%.
The influence of various thermomechanical treatment schemes, which include rotary forging and severe plastic deformation by equal-channel angular pressing, on the structure and the mechanical and func
1 January 2021 in Russian Journal of Non-Ferrous Metals
This work is devoted to the finite-element modeling of the deformation mode of a small-diameter rod billet during pressure hot treatment in the combination
1 May 2021 in Russian Journal of Non-Ferrous Metals
TiNi shape memory alloys with a superelastic effect are widely used in tribological interfaces requiring high wear resistance. One of the common approaches to reducing the wear of various metals is the application of severe plastic deformation (SPD), resulting in structural refinement and corresponding hardening. This paper investigates the tribological behaviour of a nanostructured Ti49.3Ni50.7 shape memory alloy produced using SPD. The friction and wear characteristics of the alloy at room temperature are compared in the coarse-grained, nanostructured, and nanostructured aged states. Through hardness measurement and transmission electron microscopy, it is shown that the transformation of a coarse-grained state into a nanostructured state increases wear resistance and hardness, reduces the coefficient of friction, and changes the friction mechanism. Formed nanoparticles during ageing in a nanostructured state further increase wear resistance.