Wael Almustafa

Mr. Wael Almustafa

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2024 in Polymers
Verified
Journal Article
Open access
PDF file
WAWael Almustafa
Wael Almustafa
DSDirk Schubert
Dirk Schubert
SGSergiy Grishchuk
Sergiy Grishchuk
JSJoerg Sebastian
Joerg Sebastian
GGGregor Prof. Dr. Grun
Gregor Prof. Dr. Grun
Poly-3-hydroxybutyrate (P3HB) is a biodegradable polyester produced mainly by bacterial fermentation in an isotactic configuration. Its high crystallinity (about 70%) and brittle behavior have limited the process window and the application of this polymer in different sectors. Atactic poly-3-hydroxybutyrate (a-P3HB) is an amorphous polymer that can be synthesized chemically and blended with the isotactic P3HB to reduce its crystallinity and improve its processability Ring-opening polymerization (ROP) is the most cited synthesis route for this polymer in the literature. In this work, a new synthesis route of a-P3HB by self-polycondensation of racemic ethyl 3-hydroxybutyrate will be demonstrated. Different catalysts were tested regarding their effectiveness, and the reaction parameters were optimized using titanium isopropoxide as the catalyst. The resulting polymers were compared by self-polycondensation for their properties with those of a-P3HB obtained by the ROP and characterized by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC), and the double bond content (DBC) was determined by UV–VIS spectroscopy by using 3-butenoic acid as a standard. Additionally, a life cycle analysis (LCA) of the new method of synthesizing has been carried out to assess the environmental impact of a-P3HB.

16 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
WAWael Almustafa
Wael Almustafa
SGSergiy Grishchuk
Sergiy Grishchuk
MRMichael Redel
Michael Redel
DSDirk Schubert
Dirk Schubert
GGGregor Prof. Dr. Grun
Gregor Prof. Dr. Grun
Poly(3-hydroxybutyrate) is a biobased and biodegradable polymer, produced via bacterial fermentation and characterized by an isotactic structure and mechanical properties similar to those of polyethylene and polypropylene. However, its brittleness—due to high crystallinity (~70%) and thermal degradation, starting at a temperature range of 180–190 °C near its melting point (175 °C)—makes its processing difficult and limits its applications. Most recent studies on modifying P3HB involved solution casting, typically using chloroform, which raises sustainability concerns. In this study blends of isotactic poly(3-hydroxybutyrate) (i-P3HB) with atactic poly(3-hydroxybutyrate) (a-P3HB) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) were prepared through solvent-free extrusion, and the thermal and mechanical properties of these blends were characterized. The obtained blends showed an extended processing window with reduced processing temperatures (150–160 °C), which were significantly lower than the onset of the decomposition temperature of i-P3HB, thereby avoiding thermal degradation. Furthermore, the crystallinity of these blends could be varied between 17 and 70%, depending on the polymer ratio, which allows for tailormade materials with tunable mechanical properties and an elongation at break up to 600%. Based on the results, the obtained blends in this study are promising candidates for various applications and processing techniques, such as injection molding, extrusion, and fiber spinning, offering a sustainable alternative to conventional plastics.

31 January 2025 in Journal of Applied Polymer Science
Verified
Journal Article
Open access
WAWael Almustafa
Wael Almustafa
SGSergiy Grishchuk
Sergiy Grishchuk
JSJörg Sebastian
Jörg Sebastian
DSDirk W. Schubert
Dirk W. Schubert
GGGregor Grun
Gregor Grun
Poly(3‐hydroxybutyrate) (P3HB) is a biobased and biodegradable polymer that is primarily produced through biotechnological fermentation processes. Its high crystallinity of around 70% and low thermal stability hinder its processing and application in different sectors. In this work, blends of isotactic poly(3‐hydroxybutyrate) (i‐P3HB) with the chemically synthesized atactic poly(3‐hydroxybutyrate) (a‐P3HB) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P34HB) were prepared via solution casting. The thermal, mechanical, and morphological properties of the blends were analyzed to evaluate the influence of a‐P3HB and P34HB on the processing window of i‐P3HB. The obtained blends exhibited reduced glass transition temperatures, from 5.5°C for neat i‐P3HB to around −53°C with 50 wt.% of a‐P3HB, as well as reduced melting temperatures, reaching 155°C with 50 wt.% of a‐P3HB. Furthermore, blends containing all three polymers exhibited also a significant decrease in the degree of crystallinity reaching 19% and an improved elongation at break of up to 70%. The reduced melting temperature facilitates processing at temperatures below the melting temperature of neat i‐P3HB (175.5°C), avoiding its thermal degradation. Consequently, these blends broaden the processing window and enhanced the flexibility of i‐P3HB, facilitating its application across various sectors, including packaging and textiles.

23 October 2025 in Coatings
Verified
Journal Article
Open access
PDF file
MTMARTA ALBERTINA FERNANDES TEIXEIRA
MARTA ALBERTINA FERNANDES TEIXEIRA
WAWael Almustafa
Wael Almustafa
JCJoana Castro
Joana Castro
CGCatarina Guise
Catarina Guise
HVHelena Vilaça
Helena Vilaça
CSCarla Joana dos Santos Joana Marinho da Silva
Carla Joana dos Santos Joana Marinho da Silva
Developing sustainable textile finishes that enhance moisture management and breathability remains a significant challenge in designing high-performance apparel. In this study, we propose an eco-friendly coating strategy utilizing an aqueous dispersion of poly(3-hydroxybutyrate)-diol (PHB.E.0), a member of the polyhydroxyalkanoate (PHA) family. This coating was applied to woven polyester (PES) and cotton (CO) fabrics using a low-impact spray-coating technique, aiming to improve functional properties while maintaining environmental sustainability. This solvent-free process significantly reduces chemical usage and energy demand, aligning with sustainable manufacturing goals. Successful deposition of the coating was confirmed by scanning electron microscopy (SEM), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), elemental (C/O) analysis, and thermogravimetric analysis (TGA), which also revealed substrate-dependent thermal behaviour. Wettability, water absorption, and permeability tests showed that the coated fabrics retained their hydrophilic character. PHB.E.0 coatings led to a significant reduction in air permeability, particularly after hot pressing at 180 °C, from ≈670 to ≈171 L·m−2 s−1 for PES and from ≈50 to ≈30 L·m−2·s−1 for CO, without compromising water vapor permeability. All coated samples maintained high breathability, essential for wearer comfort. These results demonstrate that PHB.E.0 coatings enhance wind resistance while preserving moisture vapor transport, offering a sustainable and effective solution for functional sportswear.

22 September 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
MTMARTA ALBERTINA FERNANDES TEIXEIRA
MARTA ALBERTINA FERNANDES TEIXEIRA
WAWael Almustafa
Wael Almustafa
JCJoana Castro
Joana Castro
CGCatarina Guise
Catarina Guise
HVHelena Vilaça
Helena Vilaça
CSCarla Joana dos Santos Joana Marinho da Silva
Carla Joana dos Santos Joana Marinho da Silva
Developing sustainable textile finishes that enhance moisture management and breathability remains a significant challenge in designing high-performance apparel. In this study, we propose an eco-friendly coating strategy utilizing an aqueous dispersion of poly(3-hydroxybutyrate)-diol (PHB.E.0), a member of the polyhydroxyalkanoate (PHA) family. This coating was applied to woven polyester (PES) and cotton (CO) fabrics using a low-impact spray-coating technique, aiming to improve functional properties while maintaining environmental sustainability. This solvent-free process significantly reduces chemical usage and energy demand, aligning with sustainable manufacturing goals. Successful deposition of the coating was confirmed by scanning electron microscopy (SEM), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), elemental (C/O) analysis, and thermogravimetric analysis (TGA), which also revealed substrate-dependent thermal behaviour. Wettability, water absorption, and permeability tests showed that the coated fabrics retained their hydrophilic character. PHB.E.0 coatings led to a significant reduction in air permeability, particularly after hot pressing at 180 °C, from ≈670 to ≈171 l/m²/s for PES and from ≈50 to ≈30 l/m²/s for CO, without compromising water vapor permeability. All coated samples maintained high breathability, essential for wearer comfort. These results demonstrate that PHB.E.0 coatings enhance wind resistance while preserving moisture vapor transport, offering a sustainable and effective solution for functional sportswear.

4 January 2026 in Appliedchem
Verified
Journal Article
Open access
PDF file
LGLiudmyla Gryshchuk
Liudmyla Gryshchuk
SGSergiy Grishchuk
Sergiy Grishchuk
GGGregor Prof. Dr. Grun
Gregor Prof. Dr. Grun
WAWael Almustafa
Wael Almustafa
Considering the high demand for efficient chemical recycling and reusability of polyurethane foams (PUFs), combined microwave-assisted solvolysis routes have been applied to a widely used commercial PUF for pipe pre-insulation, and the reusability of as-received recycled products in the original formulation was studied. The influence of the type and amount of recyclate on the main foaming parameters, shrinkage behavior, density, compression properties, morphology, thermal stability, and humidity uptake was determined. Based on shrinkage as the main exclusion criterion, recycling products of two routes have been evaluated as suitable for reuse in the original formulation without any purification or fractionation. However, a maximum of 5 wt.% of the original polyol compound could be replaced by these recycled products to fulfill the requirement of ≤5% shrinkage, which also resulted in foam performance that is well acceptable for use in pre-insulated pipes. The most beneficial property profiles were achieved by replacing 3 wt.% of the original polyol component.