Vehicle-to-everything (V2X) technology will significantly enhance the information perception ability of drivers and assist them in optimizing car-following behavior. Utilizing V2X technology, drivers could obtain motion state information of the front vehicle, non-neighboring front vehicle, and front vehicles in the adjacent lanes (these vehicles are collectively referred to as generalized preceding vehicles in this research). However, understanding of the impact exerted by the above information on car-following behavior and traffic flow is limited. In this paper, a car-following model considering the average velocity of generalized preceding vehicles (GPV) is proposed to explore the impact and then calibrated with the next generation simulation (NGSIM) data utilizing the genetic algorithm. The neutral stability condition of the model is derived via linear stability analysis. Numerical simulation on the starting, braking and disturbance propagation process is implemented to further study features of the established model and traffic flow stability. Research results suggest that the fitting accuracy of the GPV model is 40.497% higher than the full velocity difference (FVD) model. Good agreement between the theoretical analysis and the numerical simulation reveals that motion state information of GPV can stabilize traffic flow of following vehicles and thus alleviate traffic congestion.

The type of vehicles in realistic traffic systems are not homogeneous. Impacts of the preceding vehicle’s type on the car-following behavior, fuel consumption and exhaust emissions are still unclear. This paper presents a study on the impacts of two types of preceding vehicles, heavy vehicles and new energy vehicles, on car-following behavior, traffic flow characteristics, fuel consumption and exhaust emissions. Firstly, an extended car-following model was proposed by incorporating the influence of the preceding vehicle’s type. Secondly, impacts of the preceding vehicle’s type on platoon stability were analyzed by applying linear stability theory. Finally, numerical simulations were carried out to analyze impacts of the preceding vehicles’ type on the characteristics of the car-following platoon, traffic flow operation, and vehicle’s fuel consumption and exhaust emissions. The results reveal that, compared with the normal preceding vehicle, there are negative impacts of the heavy and new-energy preceding vehicles on the platoon stability, traffic flow operation, and vehicle’s fuel consumption and exhaust emissions, and these impacts are related to the corresponding sensitivity parameters and the penetration percentages of the two types of preceding vehicle. The research results of this paper can provide a reference for understanding car-following behavior and traffic-flow characteristics affected by the type of preceding vehicles in the V2X environment.

It is of great practical and theoretical significance to identify driver fatigue state in real time and accurately and provide active safety warning in time. In this paper, a non-invasive and low-cost method of fatigue driving state identification based on genetic algorithm optimization of generalized regression neural network model is proposed. The specific work is as follows: (1) design simulated driving experiment and real driving experiment, determine the fatigue state of drivers according to the binary Karolinska Sleepiness Scale (KSS), and establish the fatigue driving sample database. (2) Improved Multi-Task Cascaded Convolutional Networks (MTCNN) and applied to face detection. Dlib library was used to extract the coordinate values of face feature points, collect the characteristic parameters of driver's eyes and mouth, and calculate the Euler Angle parameters of head posture. A fatigue identification model was constructed by using multiple characteristic parameters. (3) Genetic Algorithm (GA) was used to find the optimal smooth factor of Generalized Regression Neural Network (GRNN) and construct GA-GRNN fatigue driving identification model. Compared with K-Nearest Neighbor (KNN), Random Forest (RF), and GRNN fatigue driving identification algorithms. GA-GRNN has the best generalization ability and high stability, with an accuracy of 93.3%. This study provides theoretical and technical support for the application of driver fatigue identification.

Traffic lights detection and recognition (TLDR) is one of the necessary abilities of multi-type intelligent mobile platforms such as drones. Although previous TLDR methods have strong robustness in their recognition results, the feasibility of deployment of these methods is limited by their large model size and high requirements of computing power. In this paper, a novel lightweight TLDR method is proposed to improve its feasibility to be deployed on mobile platforms. The proposed method is a two-stage approach. In the detection stage, a novel lightweight YOLOv5s model is constructed to locate and extract the region of interest (ROI). In the recognition stage, the HSV color space is employed along with an extended twin support vector machines (TWSVMs) model to achieve the recognition of multi-type traffic lights including the arrow shapes. The dataset, collected in naturalistic driving experiments with an instrument vehicle, is utilized to train, verify, and evaluate the proposed method. The results suggest that compared with the previous YOLOv5s-based TLDR methods, the model size of the proposed lightweight TLDR method is reduced by 73.3%, and the computing power consumption of it is reduced by 79.21%. Meanwhile, the satisfied reasoning speed and recognition robustness are also achieved. The feasibility of the proposed method to be deployed on mobile platforms is verified with the Nvidia Jetson NANO platform.