In a typical gas turbine, due to its complicated blade geometry, complex vortex structures appear and cause significant aerodynamic loss. Vortex systems dominated by a tip leakage vortex near the tip region are the primary source of this loss. In this paper, to improve the aerodynamic performance of the turbine, two novel control strategies for tip leakage vortex and the tip leakage flow of the cavity tip are proposed, and their coupling control effects are numerically investigated. The first control strategy is intended to control the loss caused by the breakdown of tip leakage vortex. By inclining the external wall of the suction side rim toward the passage, the emergence of a trailing edge pressure spike is delayed. This significantly reduces the adverse pressure gradient, suppressing the breakdown of tip leakage vortex and reducing tip leakage loss. The second control strategy controls tip leakage flow using the inclined inner wall of the suction side rim, which enhances the separation bubble on the top of the rim of the suction side and reduces the leakage rate by 7.7%. In this way, the formation and development of tip leakage vortex are indirectly manipulated, inhibiting the tip leakage loss. The coupling of the two strategies reduces the blocking effect on tip leakage flow slightly compared to the second strategy. However, the stage efficiency of the turbine is still improved by 0.24% because of the effective suppression of tip leakage vortex breakdown.
A velocity gradient tensor decomposition method based on a normal frame is introduced in this paper. The velocity gradient tensor is decomposed into a compression–stretching tensor, pure rotation tensor, and pure shear tensor. The analysis shows that both the strain rate tensor and vorticity tensor in Helmholtz velocity decomposition contain shear tensor components, and the total pure shear tensor is the combination of shear components in the two tensors. Based on this decomposition and the physical meaning of each tensor term, the energy dissipation of the channel flow with or without a pressure gradient and a turbine passage flow are analyzed. The results show that the energy dissipation is caused by shear deformation and expansion and contraction deformation of the motion fluid, and pure rotation does not cause energy dissipation. In particular, the pure shear is the primary factor of energy dissipation. Shear accounts for 99.9% of energy dissipation in the fully developed turbulence of zero-pressure gradient channel flow, 99% of the energy dissipation in the separated boundary layer flow is caused by the pure shear, and 81% of the energy dissipation in the turbine stage flow is caused by pure shear.
Cavity width and height are two key geometric parameters of squealer tips, which could affect the control effect of squealer tips on tip leakage flow (TLF) of gas turbines. To explore the optimal values and the control mechanisms of cavity width and height, various cases with different cavity widths and heights are investigated by solving the steady Reynolds Averaged Navier–Stokes (RANS) equations. In this study, the range of cavity width is 9.2–15.1 τ, and that of cavity height is 1.0–3.5 τ. The results show that the optimal value of cavity height is 2.5–3.0 τ, and that of cavity width is about 10.0–10.5 τ. The small cavity width could restrain the breakdown of tip leakage vortex (TLV) and reduce the extra mixing loss. Both small cavity width and large cavity height could enhance the blocking effect on the TLF, reducing the corresponding mixing loss. However, both of them will inhibit the length of the scraping vortex (SV), which is bad for the control of loss. In addition, large cavity height could reduce the loss inside the clearance, while small cavity width could not. This work could provide a reference for the design of squealer tip.