Carbon-based electrothermal or photothermal actuators have attracted intense attention recently. They can directly convert electrical or light energy into thermal energy and exhibit obvious deformations. However, if the actuation mechanism is only limited to thermal expansion, the deformation amplitude is difficult to increase further. Moreover, complex shape-deformation is still challenging. Although a few materials were reported to realize twisting or untwisting actuation by cutting the samples into strips along different orientations, each single strip could perform only one shape-deformation mode. In this work, we propose multi-responsive actuators based on a graphene oxide (GO) and biaxially oriented polypropylene (BOPP) composite, which are designed with different shapes (strip-shape and helical-shape). The strip-shape GO/BOPP actuator shows great bending actuations when driven by humidity (curvature of up to 3.1 cm⁻¹). Due to a developed dual-mode actuation mechanism, the actuator shows a bending curvature of 2.8 cm⁻¹ when driven by near infrared (NIR) light. The great actuation outperforms most other carbon-based actuators. Then, an intelligent robot based on the GO/BOPP composite is fabricated, which can switch between the protection mode and weightlifting mode with different external stimuli. Inspired from plant tendrils, a bioinspired helical GO/BOPP actuator is further realized to show both twisting and untwisting actuations in a single actuator, fully mimicking the deformation of plant tendrils. Finally, a robot arm consisting of strip-shape and helical GO/BOPP actuators can grasp an object that is 2.9 times heavier than itself, demonstrating promising bioinspired applications.

Multi-responsive actuators driven by different stimuli (e.g. light, humidity, electricity) have attracted intense attention recently for the advantages of being used in various environments and show enormous actuation. In this work, we propose humidity- and light-driven actuators based on carbon nanotube (CNT)-coated paper and a biaxially oriented polypropylene (BOPP) composite. The CNT–paper/BOPP actuator shows large bending actuation when driven by humidity change (curvature of 1.2 cm⁻¹) and near infrared (NIR) light irradiation (curvature up to 1.6 cm⁻¹). The great actuation performances outperform most other paper-based actuators. Finally, a smart gripper, of which the initial opening width can be enlarged, is fabricated on the basis of the CNT–paper/BOPP actuators. By utilizing the bidirectional bending motion of the actuator, the opening width of the gripper can increase to a width that is 4 times larger than its initial width, so as to grasp a large object. The gripper is also able to raise and move an object that is 20 times heavier than one actuator of the gripper. We assume that this new type of actuator has great potential in artificial muscle, soft robotics and biomimetic applications.

Transparent actuators have been attracting emerging interest recently, as they demonstrate potential applications in the fields of invisible robots, tactical displays, variable-focus lenses, and flexible cellular phones. However, previous technologies did not simultaneously realize macroscopic transparent actuators with advantages of large-shape deformation, low-voltage-driven actuation and fast fabrication. Here, we develop a fast approach to fabricate a high-performance transparent actuator based on single-layer superaligned carbon nanotube sheet and polymer composites. Various advantages of single-layer nanotube sheets including high transparency, considerable conductivity, and ultra-thin dimensions together with selected polymer materials completely realize all the above required advantages. Also, this is the first time that a single-layer nanotube sheet has been used to fabricate actuators with high transparency, avoiding the structural damage to the single-layer nanotube sheet. The transparent actuator shows a transmittance of 72% at the wavelength of 550 nm and bends remarkably with a curvature of 0.41 cm⁻¹ under a DC voltage for 5 s, demonstrating a significant advance in technological performances compared to previous conventional actuators. To illustrate their great potential usage, a transparent wiper and a humanoid robot “hand” were elaborately designed and fabricated, which initiate a new direction in the development of high-performance invisible robotics and other intelligent applications with transparency.