Algae biochar (ABC), coconut shell biochar (CSBC), and coconut coat biochar (CCBC) were prepared by wet pyrolysis in a phosphoric acid solvent under normal pressure.
To build a portable and sensitive method for monitoring the concentration of the flavonoid rutin, a new electrochemical sensing procedure was established. By using nitrogen-doped carbonized polymer dots (N-CPDs) anchoring few-layer black phosphorene (N-CPDs@FLBP) 0D-2D heterostructure and gold nanoparticles (AuNPs) as the modifiers, a carbon ionic liquid electrode and a screen-printed electrode (SPE) were used as the substrate electrodes to construct a conventional electrochemical sensor and a portable wireless intelligent electrochemical sensor, respectively. The electrochemical behavior of rutin on the fabricated electrochemical sensors was explored in detail, with the analytical performances investigated. Due to the electroactive groups of rutin, and the specific π-π stacking and cation–π interaction between the nanocomposite with rutin, the electrochemical responses of rutin were greatly enhanced on the AuNPs/N-CPDs@FLBP-modified electrodes. Under the optimal conditions, ultra-sensitive detection of rutin could be realized on AuNPs/N-CPDs@FLBP/SPE with the detection range of 1.0 nmol L−1 to 220.0 μmol L−1 and the detection limit of 0.33 nmol L−1 (S/N = 3). Finally, two kinds of sensors were applied to test the real samples with satisfactory results.
In this paper, a hydroxyapatite (HAp)-doped carbon nanofiber (CNF)-modified carbon ionic liquid electrode (CILE) was prepared and used for the investigation on the direct electrochemistry and electrocatalysis of myoglobin (Mb). HAp nanoparticles were mixed within a polyacrylonitrile (PAN) solution, and a [email protected] nanofiber was synthesized by electrospinning process, which was further controlled by carbonization at 800 °C for 2 h in a nitrogen atmosphere to get a [email protected] nanocomposite. Various techniques were used to check the physicochemical properties of [email protected] Mb was mixed with a [email protected] dispersion solution and casted on the surface of CILE to obtain an electrochemical sensing platform. The direct electrochemistry of Mb on the modified electrode was checked when a pair of enhanced redox waves appeared, indicating the direct electron transfer of Mb. [email protected] exhibited high conductivity, good biocompatibility, and large surface area, which was beneficial for Mb immobilization. The modified electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid and sodium nitrite, which was further used to establish a new electroanalytical method. Real samples were analyzed by the proposed method with satisfactory results.
Water pollution has become a serious environmental problem to date. Advanced oxidation processes (AOP) have been widely applied in water treatments. However, the traditional Fenton reaction based on the Fe2+–H2O2 system has obvious drawbacks, limiting further practical applications. In this work, an Fe3O4 and nano-clothed biochar (Fe3O4/CBc) composite was prepared through a precipitation method and used for the degradation of methyl orange (MO) in water. The Fe3O4/CBc composite was characterized by FTIR, BET, SEM, TEM, XRD, and VSM. In addition, the adsorption/catalytic oxidation of MO were also tested. Specifically, Fe3O4/CBc had a rough surface, abundant porous structure, high surface area of 835.82 m2 g−1, and obvious magnetization. The catalyst showed rather high performance towards MO removal. The optimal conditions for MO removal were as follows: the dosage of hydrogen peroxide was 16 mmol L−1, pH = 3, the temperature was 35 °C, and the addition amount of adsorbent was 10 mg. Under optimal conditions, the MO removal rate can be higher than 99%. The synergistic effect between catalytic degradation and adsorption in removing MO was also observed. Besides high performance in removing MO, Fe3O4/CBc also exhibited high stability, easy magnetic separation, and great reusability, as well as the potential to be developed as a new heterogeneous Fenton catalyst.
The design and synthesis of a P-doped Mo 2 C and ultrathin N, P-doped carbon nanoribbon (P-Mo 2 C/NPC) composite as an excellent HER catalyst in both acidic and alkaline media.