Jumping is a locomotion strategy widely evolved in both invertebrates and vertebrates. In addition to terrestrial animals, several aquatic animals are also able to jump in their specific environments. In this paper, the state of the art of jumping robots has been systematically analyzed, based on their biological model, including invertebrates (e.g., jumping spiders, locusts, fleas, crickets, cockroaches, froghoppers and leafhoppers), vertebrates (e.g., frogs, galagoes, kangaroos, humans, dogs), as well as aquatic animals (e.g., both invertebrates and vertebrates, such as crabs, water-striders, and dolphins). The strategies adopted by animals and robots to control the jump (e.g., take-off angle, take-off direction, take-off velocity and take-off stability), aerial righting, land buffering, and resetting are concluded and compared. Based on this, the developmental trends of bioinspired jumping robots are predicted.

The morphing wing with large deformation can benefit its flight performance a lot in different conditions. In this study, a variable camber morphing wing with compliant leading and trailing edges is designed by large-displacement compliant mechanisms. The compliant mechanisms are carried out by a hyperelastic structure topology optimization, based on a nonlinear meshless method. A laminated leading-edge skin is designed to fit the curvature changing phenomenon of the leading edge during deformation. A morphing wing demonstrator was manufactured to testify its deformation capability. Comparing to other variable camber morphing wings, the proposal can realize larger deflection of leading and trailing edges. The designed morphing wing shows great improvement in aerodynamic performance and enough strength to resist aerodynamic and structural loadings.

Conventional manipulators with rigid structures and stiffness actuators have poor flexibility, limited obstacle avoidance capability, and constrained workspace. Some developed flexible or soft manipulators in recent years have the characteristics of infinite degrees of freedom, high flexibility, environmental adaptability, and extended manipulation capability. However, these existing manipulators still cannot achieve the shrinking motion and independent control of specified segments like the animals, which hinders their applications. In this paper, a flexible bio-tensegrity manipulator, inspired by the longitudinal and transversal muscles of octopus tentacles, was proposed to mimic the shrinking behavior and achieve the variable motion patterns of each segment. Such proposed manipulator uses the elastic spring as the backbone, which is driven by four cables and has one variable structure mechanism in each segment to achieve the independent control of each segment. The variable structure mechanism innovatively contains seven lock-release states to independently control the bending and shrinking motion of each segment. After the kinematic modeling and analysis, one prototype of such bionic flexible manipulator was built and the open-loop control method was proposed. Some proof-of-concept experiments, including the shrinking motion, bending motion, and variable structure motion, were carried out by controlling the length of four cables and changing the lock-release states of the variable structure mechanism, which validate the feasibility and validity of our proposed prototype. Meanwhile, the experimental results show the flexible manipulator can accomplish the bending and shrinking motion with the relative error less than 6.8% through the simple independent control of each segment using the variable structure mechanism. This proposed manipulator has the features of controllable degree-of-freedom in each segment, which extend their environmental adaptability, and manipulation capability.

Hydraulic accumulators are widely used in industry due to their ability to store energy and absorb fluid shock. Researchers have designed kinds of novel accumulators with better performance in these specific areas. However, the pressure in these accumulators decreases significantly when the fluid oil is continuously supplied from the accumulator to the hydraulic system. This limitation leads to a transient large pressure drop, especially in a small hydraulic system with varied working frequency. In this research, a combined piston type accumulator is proposed with a relatively steady pressure property. The gas chamber and the fluid chamber are separated by a cam mechanism. By using the nonlinear property of the cam mechanism, the nonlinear relationship between the pressure and the volume of the gas can be offset. Hence, the fluid pressure can be maintained in a relatively steady range. The defect of the traditional accumulator in the frequency varied system is analyzed in detail. Then, the structure of the new accumulator is proposed and modeled based on the traditional piston type accumulator. The mathematical equation of the cam mechanism is built under the assumption that the nitrogen gas works in an adiabatic process. A simulation system based on the Amesim platform is constructed, and mathematic equations of the system are given. Preliminary experiments are conducted to evaluate the performance of the new accumulator. The comparison results show that the adaptability of the new accumulator is obviously larger than that of the traditional accumulator in a frequency varied system.

Locusts generally live and move in complex environments including different kind of substrates, ranging from compliant leaves to stiff branches. Since the contact force generates deformation of the substrate, a certain amount of energy is dissipated each time when locust jumps from a compliant substrate. In published researches, it is proven that only tree frogs are capable of recovering part of the energy that had been accumulated in the substrate as deformation energy in the initial pushing phase, just before leaving the ground. The jumping performances of adult Locusta migratoria on substrates of three different compliances demonstrate that locusts are able to adapt their jumping mode to the mechanical characteristics of the substrate. Recorded high speed videos illustrate the existence of deformed substrate's recoil before the end of the takeoff phase when locusts jump from compliant substrates, which indicates their ability of recovering part of energy from the substrate deformation. This adaptability is supposed to be related to the catapult mechanism adopted in locusts' jump thanks to their long hind legs and sticky tarsus. These findings improve the understanding of the jumping mechanism of locusts, as well as can be used to develop artifact outperforming current jumping robots in unstructured scenarios.