Xiangpeng CAO

Dr. Xiangpeng CAO

Shenzhen University
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2022 in Buildings
Verified
Journal Article
Open access
PDF file
XCXiangpeng CAO
Xiangpeng CAO
SYShiheng Yu
Shiheng Yu
Hongzhi CuiHongzhi Cui
Hongzhi Cui
ZLZongjin Li
Zongjin Li
The three-dimensional (3D) printing technique for cement-based materials has been actively investigated and utilized in civil engineering. However, there is no systematic review of the fabricating devices. This paper reviews the software and hardware for extrusion-based 3D concrete printing. Firstly, a dedicated tool path generating software is urgently needed to meet the cementitious printing applications and to improve printing quality with toolpath optimizations. Secondly, the existing printing equipment was summarized and discussed, concluding the pros and cons of various 3D motion systems, material systems, and nozzle units. Suitable choices for scientific research and engineering applications were recommended. The reinforcing techniques were categorized and concluded with the existing drawbacks and the research trend. A hybrid manufacturing system of 3D printing and the reinforcing technique was then proposed with a system diagram and flowchart.

8 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
Hongzhi CuiHongzhi Cui
Hongzhi Cui
SYShiheng Yu
Shiheng Yu
XCXiangpeng CAO
Xiangpeng CAO
HYHaibin YANG
Haibin YANG
Three-dimensional (3D) printed concrete has recently received considerable research attention. In buildings, phase change materials (PCMs) with excellent thermoregulatory properties and thermal storage capacity can improve the insulation capacity of external walls and reduce energy consumption. In this study, microencapsulated paraffin was added to a 3D printable material and a 3D printed phase-change concrete was developed, resulting in good printability and buildability. The compressive and flexural strengths were declined maximally by 44.6% and 37.5%, respectively, with 20 wt% PCM mixed. Results from 3D printed room models proved the thermo-regulated performance by regulating the room temperature when mixed with 20 wt% PCM. With the addition of PCM, 3D printed facilities can have sufficient thermal comfort.

13 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Hongzhi CuiHongzhi Cui
Hongzhi Cui
YLYuanhong Li
Yuanhong Li
XCXiangpeng CAO
Xiangpeng CAO
MHMingyang Huang
Mingyang Huang
Patrick TangPatrick Tang
Patrick Tang
ZLZongjin Li
Zongjin Li
Different formulations for 3D printable cementitious composites have been developed for extrusion-based printing. However, there is a lack of configuration guides for actual printing operations, which integrate one printable material and one printing system closely. Three testing methods for configuration determination were proposed and tested with three material proportions, with initial setting times of 2, 8, and 13 min, respectively. The building index (BI) measures the layer stacking stability based on the material, scale, and device. The height reduction test (HRT) quantifies the shortening in the height of the printed filaments. The leaning angle (LA) refers to the maximum slope of the stacked layers. In this study, results showed the critical values were (a) 0.167 for the height reduction ratio (HRR), (b) 40° for LA, and (c) 0~19.1, 0~61.1, and 0~99.4 for BI of the three mixtures. They were the meta parameters used to guide the CAD sketching, material development, and printing configurations, including the printing speed and layer height.

17 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XCXiangpeng CAO
Xiangpeng CAO
SYShiheng Yu
Shiheng Yu
Hongzhi CuiHongzhi Cui
Hongzhi Cui
Lack of reinforcements is an existing drawback of 3D printed cementitious components, which is an urgent concern. A staple-inserting apparatus was developed and installed on a 3D printer and automatically fabricated 3D printed and staple-reinforced components with 98% successful insertion to achieve inner- and inter-reinforcement of the printed strips. The inserted staples inside the printed strips improved the compressive strength by 25% maximum owing to the inner locking effect by the staple pins, while the flexural strength did not increase because the scattered staples functioned separately. The staples over the strip interfaces remarkably increased the flexural stress by 46–120%. The inserted staples demonstrated a significant strip locking effect, but the unavoidable voids decreased the bonding between staples and the composite. The mechanical analysis concluded that the printing parameters considerably affected the reinforcing rate. The staple inserting technique proved the feasibility of automatic fabrication of fiber-reinforced and printed concrete structures.

18 December 2024 in Automation in Construction
Verified
Journal Article
Closed access
XCXiangpeng CAO
Xiangpeng CAO
SWShuoli Wu
Shuoli Wu
Hongzhi CuiHongzhi Cui
Hongzhi Cui

2 August 2024 in Construction and Building Materials
Verified
Journal Article
Closed access
HCHongzhi Cui
Hongzhi Cui
LCLele Cao
Lele Cao
XCXiangpeng CAO
Xiangpeng CAO