In this study, the synergistic behavior of Ni and Al in two low-density steels (Fe-26Mn-10.2Al-0.98C-0.15V (wt. %) and Fe-29Mn-5Al-1C-12Ni (wt. %)) and their influence on microstructures and mechanical properties were investigated. The chemical composition of κ-carbides and B2 precipitated particles as a function of annealing and aging temperature and the matrix within which they formed were elucidated. The microstructures and deformation mechanisms of both steels were studied based on their strengthening contribution. The Fe-26Mn-10.2Al-0.98C-0.15V steel mainly realized precipitation strengthening through κ-carbides and grain boundary strengthening due to full recrystallization. The strengthening caused by Fe-29Mn-5Al-1C-12Ni steel was mainly due to the presence of the B2 phase in the matrix, which was non-coherent with FCC. This led to the Orowan bypass mechanism, which made precipitation strengthening the main strengthening contribution. The synergistic effect led to the shear or bypass mechanism of both steels when plane dislocation slip occurred. In addition, it also had an influence on the work-hardening capability during plastic deformation. This study provides a promising way to further enhance the yield strength of low-density austenitic steels through the synergistic effect of Ni and Al.
High-entropy alloys (HEAs) with significant magnetocaloric effects (MCEs) have attracted widespread attention due to their potential magnetic refrigeration applications over a much more comprehensive temperature range with large refrigerant capacity (RC). However, most of them are metallic glasses (MGs) with problems of limited size, resulting in the difficulty of further applications. Therefore, research on HEAs with crystalline structures and giant MCE is urgently needed. In this paper, GdErHoCoM (M = Cr and Mn) rare-earth HEA ingots with orthorhombic structures are developed, and their magnetic behavior and MCE are studied in detail. Phase investigations find that the main phase of GdErHoCoM ingots is probably (GdErHo)Co with an orthorhombic Ho3Co-type structure of a space group of Pnma. The secondary phases in GdErHoCoCr and GdErHoCoMn are body-center-cubic Cr and Mn-rich HoCo2-type phases, respectively. Magnetic investigations reveal that both ingots undergo a first-order magnetic phase transition below their respective Neel temperatures. Above their respective Neel temperatures, a second-order transition is observed. The Neel temperatures are 40 and 56 K for GdErHoCoCr and GdErHoCoMn, respectively. Additionally, the GdErHoCoCr and GdErHoCoMn ingots exhibit maximum magnetic entropy changes and RC values of 12.29 J/kg/K and 746 J/kg and 10.13 J/kg/K and 606 J/kg, respectively, under a magnetic field of 5 T. The ingots GdErHoCoM (M = Cr and Mn) show excellent MEC properties and can be manufactured easily, making them promising for magnetic refrigerant applications.
In order to find more excellent structural materials resistant to radiation damage, high-entropy alloys (HEAs) have been developed due to their characteristics of limited point defect diffusion such as lattice distortion and slow diffusion. Specially, refractory high-entropy alloys (RHEAs) that can adapt to a high-temperature environment are badly needed. In this study, RHEAs are selected for irradiation and nanoindentation experiments. We combined the mechanistic model for the depth-dependent hardness of ion-irradiated metals and the introduction of the scale factor to modify the irradiation-hardening model in order to better describe the nanoindentation indentation process in the irradiated layer. Finally, it can be found that, with the increase in irradiation dose, a more serious lattice distortion caused by a higher defect density limits the expansion of the plastic zone.