Increased renewable energy production and storage is a key pillar of net-zero emission. The expected growth in the exploitation of offshore renewable energy sources, e.g., wind, provides an opportunity for decarbonising offshore assets and mitigating anthropogenic climate change, which requires developing and using efficient and reliable energy storage solutions offshore. The present work reviews energy storage systems with a potential for offshore environments and discusses the opportunities for their deployment. The capabilities of the storage solutions are examined and mapped based on the available literature. Selected technologies with the largest potential for offshore deployment are thoroughly analysed. A landscape of technologies for both short- and long-term storage is presented as an opportunity to repurpose offshore assets that are difficult to decarbonise.
1 December 2022 in IEEE Internet of Things Magazine
Carbon capture and storage (CCS) is critical for climate-change policies and strategies targeting global warming within the Paris Agreement. The overarching technological requirements are well described in the strategic plans, yet several barriers exist to the technology's wide-spread deployment, including improved cost-effectiveness and enhanced process integration. For the safe and reliable operation of large-scale CCS systems, the development of effective Internet of things (IoT)-based monitoring tools to ensure flow assurance of CO 2 throughout the CCS value chain is crucial. Further, reliable sensor measurements related to different transport parameters such as temperature, pressure, and flow across the process are essential to develop these methods. However, sensors are prone to errors due to inherent issues or environmental conditions which result in performance degradation of the overall monitoring system. Developing techniques for detecting anomalies in the measurements, identifying the faulty sensors and accommodating them with appropriately estimated data is one of the paramount requirements for the reliable operation of the CCS systems. In such context, the present article provides an overview of CCS's monitoring and control requirements, emphasizing data-fusion synergies. This work investigates the state-of-the-art methods for sensor validation and proposes a roadmap to further deploy metering technologies for industrial needs.
29 October 2020 in IEEE Transactions on Instrumentation and Measurement
The present work assesses the accuracy two phase flow measurement, based on cross-correlation and cross-spectrum velocity computation, using dual plane non-intrusive Electrical Capacitance Tomography (ECT), over a broad spectrum of horizontal flow configurations, combined with fraction distribution measurements from Gamma-ray Tomography (GRT). The measurement of two-phase flow encompasses the measurement of both the velocity and the phase concentration of the flow components. The accuracy of the flow velocity is still an open discussion and remains a key challenge in the field of multiphase flow measurement. The velocities of the two-phase components vary, both in between them, and across the pipe cross-section. This study assesses the use of cross- correlation techniques as methods for calculating the cross-sectional velocity distribution by deriving the transit time of the fluid flowing through two parallel ECT sensor arrays mounted on the perimeter of a pipe. The spectral distribution of the velocities is assessed for improved accuracy of individual component velocities. A dual-plane ECT is adopted for the velocity measurements and are combined with state-of-the-art density-based cross-sectional phase fraction distribution from a GRT system to measure the volumetric flow rates of the two phases. The results show that the cross-spectrum method provides enhanced velocity estimation for both flow phases over the conventional cross-correlation technique. Further improvement was reported using a simple predictive correction model resulting in flowrate estimation accuracy of ±10%.The method for two-phase flow measurement suggested in this work leverages the accuracy of the tomography systems on accurate fraction measurement and fast data acquisition to lead to potential enhancement in process control by enabling a more accurate prediction of components velocities.
1 October 2020 in Journal of Natural Gas Science and Engineering
Magnetic induction tomography (MIT) is a novel technology for flow measurement offering significant promise in the measurement of multiphase flows containing low-conductivity fluids such as saline water. Such measurements rely on optimal effective shielding to avoid external field interference and extraneous capacitive coupling that can lead to false readings and overestimations of the eddy current-induced fields. The performance of various attenuation materials in the low megahertz frequency spectrum is presented and compared with outcomes from a numerical computational method. The results demonstrate that the shielding mechanism that prevails at low frequencies is that of reflection. Consequently, hard shields such as metals show superior wave attenuation performance for MIT systems operating below 13 MHz. For higher frequencies, the absorption effect on the incident wave path within soft electromagnetic shields presents enhanced shielding properties. This paper also explores the limitations of traditional testing geometry for shielding effectiveness and proposes an alternative approach to near-field, free-space measurement for MIT sensors. The proposed semi-enclosed approach shows enhanced shielding effectiveness measurements compared with the traditional transversal barrier method. The proposed method was used to assess the electromagnetic shielding effectiveness of ferromagnetic and various metallic materials.
23 December 2023 in Flow Measurement and Instrumentation