Younes Dehmani

Prof. Dr. Younes Dehmani

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024 in Arabian Journal of Chemistry
Verified
Journal Article
Open access
YDYounes Dehmani
Younes Dehmani
BMBouchra Ba Mohammed
Bouchra Ba Mohammed
RORachid Oukhrib
Rachid Oukhrib
ADAli Dehbi
Ali Dehbi
TLTaibi Lamhasni
Taibi Lamhasni
SASadik Abouarnadasse
Sadik Abouarnadasse

26 February 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Jordana GeorginJordana Georgin
Jordana Georgin
CGClaudete Gindri
Claudete Gindri
JOJivago Schumacher de Oliveira
Jivago Schumacher de Oliveira
YDYounes Dehmani
Younes Dehmani
NMNoureddine El Messaoudi
Noureddine El Messaoudi
Dison S FrancoDison S Franco
Dison S Franco
The demand for drinking water is a reality that plagues modern society and will worsen in the coming decades. Factors such as climate change, population growth, and intense, often disorderly urbanization are expected to limit the availability of this essential resource for life. With this justification, several technologies involving water remediation/purification have been improved to increase energy efficiency. One key approach involves the use of residual biomass derived from biological sources as adsorbents with valuable properties. This line of research supports waste management, and the materials are easily obtainable, especially on a large scale, with low costs and negligible secondary environmental impacts. In the early 2000s, it was demonstrated that these materials possess functional groups (amino, hydroxyl, and carboxyl) that are favorable for attracting certain pollutants that are present in wastewater. Generally, the unmodified precursor material has properties that are not favorable for adsorption, such as limited adsorption capacity, low mechanical resistance, and unstable surface chemistry. Therefore, there has been a strong investment in studies aimed at developing methodologies to produce bio-based materials with high properties supported by mathematical models aimed at water purification. This critical review describes the modifications, functionalization, and production of bio-based materials aimed at remediating wastewater via the adsorption process. Their use involves the elimination of organic pollutants, water/oil separation, the removal of micropollutants, and membrane filtration. The properties of bio-based materials from biopolymers and their synthesis methodologies are analyzed, with a focus on water remediation. Finally, the challenges and future perspectives are highlighted, highlighting the relevance of this group of adsorbents in minimizing the challenges and limitations present in the field of water purification and providing new, innovative solutions.

1 January 2020 in Heliyon
Verified
Journal Article
Open access
YDYounes Dehmani
Younes Dehmani
Abdelaziz Ed-DraAbdelaziz Ed-Dra
Abdelaziz Ed-Dra
OZOmar Zennouhi
Omar Zennouhi
ABAziz Bouymajane
Aziz Bouymajane
FFFouzia Rhazi Filali
Fouzia Rhazi Filali
SASadik Abouarnadasse
Sadik Abouarnadasse
Oil mill wastewater (OMW) is the main liquid discharge from oil mills, it is considered as a dangerous pollutant due to its toxic chemical compounds which are unloaded directly in the environment without any treatment. The aims of this study were to evaluate the effectiveness of OMW adsorption on clay as a good method for the elimination of toxic chemical compounds and to study the application of treated OMW as an irrigation source in agricultural field. For this, Clay was collected from the city of Agourai (Meknes region, Morocco) and characterized by X-ray diffraction, X-ray fluorescence spectrometry, BET and FTIR analysis. Moreover, the treated OMW was analyzed using UHPLC-ESI-MS and the determination of total phenolic content (TPC) was also performed. However, the application of the treated OMW in agricultural field was performed by the determination of its effect on the germination of Lepidium sativum seeds (in vitro) and as a source of irrigation of Vicia faba plants (in situ). The results of this study showed that OMW had the following physicochemical characteristics: average pH of 4.88, TPC of 4.75 g/l, COD of 80 g/l, BOD5 of 18.72 g/l, conductivity of 16.05 cm-1, dry matter of 135.7 g/l and volatile matter of 58.7 g/l. The adsorption on clay had increased the pH from 4.88 to 6.14 and reduced significantly the organic matter (42% of COD and 57.4% of phenolic compounds). UHPLC-ESI-MS analysis showed the presence of a wide variety of organic compounds in OMW, with the appearance of new compounds after adsorption. Moreover, the use of treated OMW as a source of irrigation showed a significant effect on the germination of Lepidium sativum seeds and the growth of Vicia faba plants. From this study, we can conclude that the adsorption on clay is a good method for the treatment of OMW, which became non-toxic for environment and can be used as a source of irrigation in agricultural field.

16 May 2023 in Water
Verified
Journal Article
Open access
PDF file
YDYounes Dehmani
Younes Dehmani
Dison S FrancoDison S Franco
Dison S Franco
Jordana GeorginJordana Georgin
Jordana Georgin
TLTaibi LAMHASNI
Taibi LAMHASNI
YBYounes Brahmi
Younes Brahmi
ASAbouarnadasse Sadik
Abouarnadasse Sadik
This study focuses on the removal of phenol from aqueous media using Agouraï clay (Fes-Meknes-Morocco region) and Geulmima clay (Draa Tafilalet region). The characterization of the clay by Fourier Transform Infrared (FTIR) Spectroscopy, X-ray diffraction (XRD), N2 adsorption (BET), Scanning Electron Microscopy (SEM), and Thermogravimetric and differential thermal analysis (DTA/GTA) indicates that it is mainly composed of quartz, kaolinite, and illite. The results showed that raw Clay Agourai (RCA) and raw Clay Geulmima (RCG) adsorbed phenol very quickly and reached equilibrium after 30 min. Thermodynamic parameters reveal the physical nature of the adsorption, the spontaneity, and the sequence of the process. However, the structure and structural characterization of the solid before and after phenol adsorption indicated that the mechanism of the reaction was electrostatic and that hydrogen bonding played an important role in RCG, while kinetic modeling showed the pseudo-second-order model dynamics. The physics-statistics modeling was employed for describing the isotherm adsorption for both systems. It was found that the monolayer model with two different energy sites best describes adsorption irrespective of the system. The model indicates that the receptor density of each clay direct influences the adsorption capacity, demonstrating that the composition of the clay is the main source of the difference. Thermodynamic simulations have shown that the adsorption of phenol is spontaneous and endothermic, irrespective of the system. In addition, thermodynamic simulations show that the RCG could be adsorbed even further since the equilibrium was not achieved for any thermodynamic variable. The strength of this study lies in the determination of the adsorption mechanism of phenol on clay materials and the optimum values of temperature and pH.

4 November 2022 in Molecules
Verified
Journal Article
Open access
PDF file
UFUendel dos Santos Feitoza
Uendel dos Santos Feitoza
PTPascal S. Thue
Pascal S. Thue
ELEder Lima
Eder Lima
GRGlaydson Simoes dos Reis
Glaydson Simoes dos Reis
Navid RabieeNavid Rabiee
Navid Rabiee
SDSilvio L. P. Dias
Silvio L. P. Dias
This work proposes a facile methodology for producing porous biochar material (ABC) from açaí kernel residue, produced by chemical impregnation with ZnCl2 (1:1) and pyrolysis at 650.0 °C. The characterization was achieved using several techniques, and the biochar material was employed as an adsorbent to remove catechol. The results show that ABC carbon has hydrophilic properties. The specific surface area and total pore volume are 1315 m2·g−1 and 0.7038 cm3·g−1, respectively. FTIR revealed the presence of oxygenated groups, which can influence catechol adsorption. The TGA/DTG indicated that the sample is thermally stable even at 580 °C. Adsorption studies showed that equilibrium was achieved in <50 min and the Avrami kinetic model best fits the experimental data, while Freundlich was observed to be the best-fitted isotherm model. Catechol adsorption on ABC biochar is governed by van der Waals forces and microporous and mesoporous filling mechanisms. The Qmax is 339.5 mg·g−1 (40 °C) with 98.36% removal of simulated effluent, showing that açaí kernel is excellent biomass to prepare good biochar that can be efficiently used to treat real industrial effluents.

15 January 2024 in Molecules
Verified
Journal Article
Open access
PDF file
ADAli Dehbi
Ali Dehbi
YDYounes Dehmani
Younes Dehmani
Dison S FrancoDison S Franco
Dison S Franco
HOHind Omari
Hind Omari
Jordana GeorginJordana Georgin
Jordana Georgin
ALAdil Lamini
Adil Lamini
The production of cobalt oxide nanoparticles and their use in the adsorption of methylene blue (MB) from solution is described in the paper. The X-ray diffraction patterns show that the synthesized cobalt oxide nanoparticles have a crystalline cubic structure. The study of the adsorption of methylene blue onto the cobalt oxide nanoparticles involved determining the contact time and initial concentration of the adsorption of MB on the adsorbent. The kinetics of adsorption were analyzed using two kinetic models (pseudo-first order and pseudo-second order), and the pseudo-second-order model was found to be the most appropriate for describing the behavior of the adsorption. This study indicates that the MLTS (monolayer with the same number of molecules per site) model is the most suitable model for describing methylene blue/cobalt oxide systems, and the parameter values help to further understand the adsorption process with the steric parameters. Indicating that methylene blue is horizontally adsorbed onto the surface of the cobalt oxide, which is bonded to two different receptor sites. Regarding the temperature effect, it was found that the adsorption capacity increased, with the experimental value ranging from 313.7 to 405.3 mg g−1, while the MLTS predicted 313.32 and 408.16 mg g−1. From the thermodynamic functions, high entropy was found around 280 mg L−1 concentration. For all concentrations and temperatures examined, the Gibbs free energy and enthalpy of adsorption were found to be negative and positive, respectively, suggesting that the system is spontaneous and endothermic. According to this study’s findings, methylene blue adsorption onto cobalt oxide nanoparticles happens via the creation of a monolayer, in which the same amount of molecules are adsorbed at two distinct locations. The findings shed light on the methylene blue adsorption process onto cobalt oxide nanoparticles, which have a variety of uses, including the remediation of wastewater.