Wheat and rice starches, traditionally used to stiffen fabric, become less contaminated and more antiseptic after fermentation for several years, thus enhancing their functional activity. In the present study, analytical techniques using particle size analysis, a gloss meter and a colorimeter were used to measure the physical properties of wheat and rice starches that had been fermented for 5 and 7 years, respectively. Their chemical contents and composition were determined by nutrient measurements and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The ToF-SIMS spectra and ion images showed that fermented starch contained more carbohydrate and less lipid than fresh starch. The surface morphologies of the fermented starch granules and starch-coated textiles were examined by scanning electron microscopy and compared with the surface morphologies of fresh starch granules. The fermented wheat and rice starch granules were smaller and more rounded with a lower level of N-containing compounds (proteins) and exhibited more antiseptic properties than fresh starch granules. The results showed that physical measurements and chemical analysis were simple and complementary techniques for investigating traditional Korean starch materials and textiles.
Lacquer sap has been traditionally used in coatings and artwork. Suitable types of lacquer are required to preserve and restore artifacts. Recently, unsuitable cashew nut shell liquid (CNSL) has often been mixed with lacquer sap, so it is necessary to identify the characteristics of lacquer sap by the production area. However, research is still focused on urushiol and laccol. In this study, Myanmarese lacquer sap collected from Gluta usitata, which contains thitsiol as the main component, was analyzed by HPLC to quantify thitsiol using the standards 3-(10-phenyldecyl) benzene-1,2-diol (thitsiol 16) and 3-(8Z,11Z-pentadecadienyl)-benzenediol (urushiol 15:2) as markers, and calibration curves were plotted. The coefficients of determination (R2) for thitsiol 16 and urushiol 15:2 were 0.9985 and 0.9983, respectively. In addition, a blind test was conducted to confirm that accurate quantitative analysis was possible even when Myanmarese lacquer was mixed with lacquer from another production area, which contained urushiol as the main component, and CNSL, which contained cardol, a completely different catechol. Quantitative analysis of thitsiol 16 and urushiol 15:2 in Myanmarese lacquer using HPLC can be used to evaluate the quality of lacquer sap and for more sophisticated activities such as restoration by classifying differences in lacquer sap by the production area.
Breathable nonwoven textiles for protective and hygiene applications require antimicrobial coatings that combine rapid pathogen inactivation with low-temperature processability, strong adhesion, thermal robustness, preserved porosity, and acceptable biological safety. Herein, we report a roll-coatable, particle-free, bio-derived Cu–urushiol metallo-polymer coating enabled by copper 2-ethylhexanoate, which transforms urushiol into a robust crosslinked coordination network through accelerated thermal curing at ≤100 °C. In this system, copper is retained within the cured matrix as highly dispersed mixed-valence Cu+/ Cu2+—O coordination sites rather than as free metal or metal-oxide particles, thereby creating a contact-active antimicrobial and antiviral interface. Spectroscopic analyses reveal that in situ Cu–catechol complexation drives a coordination-assisted redox pathway that promotes oxidative polymerization while stabilizing copper within the hybrid network. Direct roll coating further demonstrates that this formulation produces a strongly adhered, particle-shedding-resistant, and thermally robust coating on porous, heat-sensitive nonwoven fabrics without blocking the fibrous microstructure. The optimized coatings achieve ≥99.9% reduction of Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus cereus within 2 h and exhibit strong antiviral activity, including 99.773% reduction of influenza A (H1N1). Whereas raw urushiol lacquer shows severe cytotoxicity with cell viability below 30%, Cu–urushiol coatings display significantly improved cytocompatibility, with most formulations maintaining >80% viability. These results establish a scalable low-temperature coating strategy for durable, breathable, and contact-active antimicrobial textiles.