In this study, we designed a feedback linearization control strategy for linear permanent magnet synchronous motors (LPMSMs) as well as a robust control mechanism. First, the highly nonlinear system was transformed into an exact linear system by the feedback linearization technique. Then, we designed a robust controller to mitigate the impact of system parameter disturbances on system performance. This novel robust feedback controller can be applied to electromagnetic force, speed and position control loops in linear motors, correct the errors created by uncertainty factors in the entire system in real time, and set the system’s settling time based on the application environment of the plant. Finally, we performed simulations and experiments using a PC-based motor control system, which demonstrated that the proposed robust feedback controller can achieve good performance in the controlled system with robust anti-disturbance control.
This study investigated the stability of virtual reality (VR) haptic feedback from the perspective of energy. A fuzzy controller was designed on the basis of passivity theory to mitigate the shock and divergence in a virtual component caused by the negative damping coefficient and the high spring coefficient. Compared with a standard passivity controller, a fuzzy-passivity controller is more effective in shortening the time required to stabilize a system with high initial energy and devices that consume energy slowly. First, MATLAB/Simulink was employed for stability simulation and analysis. The fuzzy-passivity controller provided more favorable stability convergence than did the standard passivity controller. The simulation results align with expectations. Second, the completed VR system was applied as an experiment platform for verifying the feasibility of the fuzzy-passivity controller. To achieve one degree of freedom in the experiments, a robotic arm was exclusively designed to replace manual force. Finally, compared with standard passivity control systems, the results indicated that the fuzzy-passivity controller enables improved control over the stability of VR haptic feedback.
This paper proposes a passivity theorem on the basis of energy concepts to study the stability of force feedback in a virtual haptic system. An impedance-passivity controller (IPC) was designed from the two-port network perspective to improve the chief drawback of haptic systems, namely the considerable time required to reach stability if the equipment consumes energy slowly. The proposed IPC can be used to achieve stability through model parameter selection and to obtain control gain. In particular, haptic performance can be improved for extreme cases of high stiffness and negative damping. Furthermore, a virtual training system for one-degree-of-freedom sticking was developed to validate the experimental platform of our IPC. To ensure consistency in the experiment, we designed a specialized mechanical robot to replace human operation. Finally, compared with basic passivity control systems, our IPC could achieve stable control rapidly.
Haptic surgical simulators assign a constitutive force law to each tissue class segmented from volumetric images and switch between laws, unsmoothed, as the instrument advances. This study characterizes the resulting force discontinuities and derives energy-consistent remedies. The artifacts were quantified on a layered brain-tissue model and on the standard needle-insertion formulation, classified by the variable that triggers the switch, and treated by position-domain blending with a closed-form, velocity-adaptive transition width and by a continuous velocity-domain friction law. Unsmoothed force steps reach 8.6 times the quasi-static force-discrimination threshold reported in the literature and exceed it across 95% of the needle model’s parameter space. Blending reduces the peak rendered jerk by more than an order of magnitude at a boundary blur below the imaging voxel size and leaves the force field conservative, preserving passivity by construction, whereas a first-order low-pass filter applied to the rendered force can violate passivity under the conditions considered, injecting energy in proportion to its time constant. Switching artifacts are therefore fidelity rather than stability defects and can be removed at negligible cost by smoothing in the domain of the switching variable. These perceptual comparisons are numerical and await validation with human participants.