The characteristics of raindrop size distributions (DSDs) during a midlatitude continental squall line on 30 July 2014 in east China are studied, and the different life stages are observed by OTT second-generation Particle Size Velocity (Parsivel2) disdrometers at Chuzhou during the mature stage and Nanjing during the declining stage. The observed rainfall is classified into convective line, transition, and stratiform regions based on the structure of the radar reflectivity Z and rainfall intensity R. The results show that the DSD characteristics of the different precipitation types and different squall-line stages are very different. The convective center has the largest number concentration and quantity of large drops corresponding to the highest rain rate; the rain rates in the trailing edge and stratiform regions are similar, although a lower concentration of small drops is present in the latter. Between the two stages, the drop size and number concentration for the convective center decrease, although the leading edge during the declining stage has more numerous larger drops; the number concentration is similar in the stratiform rainfall, but the drops become much smaller. For the normalized distribution, the scaled spectra for the convective center are closer to an exponential distribution, and the μ value during the declining stage is larger than that during the mature stage for the stratiform region and similar during both stages for the convective center. The declining stage has a larger exponent b and smaller coefficient A in the Z–R relationship based on fits for the entire dataset. Moreover, the R(ZH, ZDR) estimator is more accurate than that when using the Z–R relation algorithm.
Gaussian distribution is used to describe the power law along the propagation path and phase screen of the non-Kolmogorov turbulence is proposed based on the equivalent refractive-index structure constants. Various simulations of Gaussian beam propagation in Kolmogorov and non-Kolmogorov turbulence are used for telling the difference between isotropic and anisotropic turbulence. The results imply that the non-Kolmogorov turbulence makes a great influence on the simulations via power law in spectrum and the number of phase screens. Furthermore, the influence is mainly reflected in light intensity and beam drift. Statistics suggest that when Gaussian beam propagate through single phase screen of non-Kolmogorov, maximum and uniformity of light intensity increase first and then decrease with power law, and beam drift firstly increases and then to stabilize. When Gaussian beam propagate through multiple phase screens, relative errors of beam drift decrease with the number of phase screens. And scintillation indices in non-Kolmogorov turbulence is larger than that in Kolmogorov turbulence when the number is small. When the number is big, the scintillation indices in non-Kolmogorov turbulence is smaller than that in Kolmogorov turbulence. The results shown in this paper demonstrate the effect of the non-Kolmogorov turbulence on laser atmospheric transmissions. Thus, this paper suggests a possible direction of the improvement of the laser transmission accuracy over a long distance through the atmosphere
Light scattering by non-spherical particles is an important factor influencing atmospheric radiative transfer. To accurately simulate the scattering properties of non-spherical particles, the Invariant Imbedded T-matrix method (IIM T-Matrix) is developed by combining the Lorenz–Mie theory and invariant imbedding technique. In this model, the non-spherical particle is regarded as an inhomogeneous sphere and discretized into multiple spherical layers in the spherical coordinate system. The T-matrix of the inscribed sphere is firstly calculated by the Lorenz–Mie theory, and then taking it as the initial value, the T-matrix is updated layer by layer by using the invariant imbedding technique. To improve the computational efficiency, the model is further parallelized by the OpenMP technique. To verify the simulation accuracy of the IIM T-Matrix method, the results of the model are compared with those of the EBCM (Extended Boundary Condition Method) T-Matrix method, DDA (Discrete Dipole Approximation) and MRTD (Multi-Resolution Time Domain). The results show that the scattering phase matrix simulated by the IIM T-Matrix method closely agrees with that of the well-tested models, indicating that the IIM T-Matrix method is a powerful tool for the light scattering simulation of non-spherical particles. Since the IIM T-Matrix method is derived from the volume integral equation, compared to the T-Matrix method which is based on surface integral principles (i.e., “EBCM” or the “null field method”), it can be applied to the scattering calculations of particle with arbitrary shapes and inhomogeneous compositions, which can greatly expand the application scope of the T-Matrix method.
The invariant imbedding (IIM) T-matrix method has shown great potential in light scattering field. However, the T-matrix need to be calculated through the matrix recurrence formula derived from the Helmholtz equation, thus its computational efficiency is much lower than Extended Boundary Condition Method (EBCM). To alleviate this problem, the Dimension-Variable Invariant Imbedding (DVIIM) T-matrix method is presented in this paper. Compared with the traditional IIM T-matrix model, the dimensions of the T-matrix and relevant matrices are gradually increasing as the iteration performed step by step, thus the unnecessary operations of large matrices can be avoided in early iterations. To optimally determine the dimension of these matrices in each iterative calculation, the spheroid-equivalent scheme (SES) is also proposed. The effectiveness of the DVIIM T-matrix method is validated from the modeling accuracy and calculation efficiency. The simulation results show that compared with traditional T-matrix method, its modeling efficiency can be improved notably, especially for the particles with large size and aspect ratio, where for the spheroid with a aspect ratio of 0.5, the computational time is cut down by 25%. Though the dimension of the T matrix is cut down in the early iterations, the computational precision of DVIIM T-matrix model is not decreased notably, and a good agreement is achieved between the calculation results of DVIIM T-matrix method, IIM T-matrix method and other well-validated models (like EBCM and DDACSAT), where the relative errors of the integral scattering parameters (e.g., extinction, absorption, scattering cross sections) are generally less than 1%.
In this study, the heat deposition characteristics of laser filaments formed by femtosecond laser pulses with different initial energy under influences of external focusing are numerically investigated by means of (3 D + 1)-dimensional numerical simulations. The results indicate that the numbers and intensity of filaments increase with growth of the input energy. The formation of multiple filaments limits the increase of filament length. When fixing the input energy, radius of the filament becomes narrow while its numbers and intensity are both enhanced under strong focusing. Under stronger focusing, the filaments can also deposit higher laser energy and result in larger energy deposition rate for laser beams with a given input energy, which further leads to dramatic increase in local temperature and pressure. These are likely to affect the filament induced airflow velocity and eventually the mass of formed snow in the cold supersaturated cloud chamber.