We theoretically design and experimentally demonstrate an invisibility concentrator, consisting of several truncated cylinders, for water waves based on a scattering cancellation method. The invisibility concentrator works by controlling the scattered waves from the target device. Our simulated and experimental results verify the concentration of waves and show the effective invisibility of the designed concentrator. This approach provides the possibility of simultaneously realizing wave concentration and an invisibility cloak, which has potential applications in energy harvesting.
Cloaking based on scattering cancellation is investigated for a surface-piercing truncated cylinder surrounded by several annularly arranged small truncated cylinders in water waves. The cloaking condition of a body in water waves corresponds to the absence of scattered waves radiating to infinity; that is, the cloaked structure appears invisible to a far-field observer. The effects of three kinds of defects of the outer cylinders on cloaking are considered: a radial location defect, a circumferential location defect, and a size defect. The higher-order boundary element method is combined with the wave interaction theory to accurately study this wave–structure interaction problem. Both the scattered wave energy of the entire structure and the wave drift force on the inner cylinder are calculated and analyzed for the different defects. The symmetry of the defect effects and the cloaking-wavenumber offset caused by a radial position defect of the entire outer cylinder array are first identified. The radial location defect is successfully adopted to control the cloaking frequencies over a wide band.
The utilization of ocean renewable energy, especially wave energy, is of great significance in ocean engineering. In this study, a three-dimensional numerical wave tank was established to simulate the wave-float interaction based on the Reynolds-averaged Navier–Stokes equations and the Realizable K-Epsilon Two-Layer turbulence model was applied. Firstly, convergence studies with respect to the mesh and time step were carried out and confirmed by the published analytical and numerical data. Then, the resonance condition of a particular float was solved by both numerical and analytical methods. The numerical and the analytical results are mutually verified in good agreements, which verify the reliability of the analytical process. Furthermore, a wave energy converter (WEC) consisting of a single float without damping constant was adopted, and its hydrodynamic performance in different wave conditions was investigated. It was found that the damping factor can affect the motion response of the float and the wave force it receives. Under a certain wavelength condition, the WEC resonates with the wave, at which the wave force on the float, displacement of the float and other parameters reach a maximum value. Finally, the influence of linear damping constant on the power take-off (PTO) was studied. The results show that the damping factor does not affect the wave number turning point of the optimal damping constant.
A numerical model is developed to investigate the hydrodynamic characteristics of a moving submarine induced by internal solitary waves (ISWs) in continuously stratified fluids. A new numerical scheme for the generation of ISWs with a current is proposed, in which the forward speed of the submarine is equivalent to the current. The superposition of the velocity field obtained from extended Korteweg-de Vires (eKdV) theory and the velocity field of the current is taken as the initial velocity field in a numerical wave tank. Convergence analysis is conducted, while the present numerical model is validated by comparing it with experimental data. Then, the interaction between the moving submarine and the ISWs against different pycnocline thicknesses and different moving speeds is investigated. The proposed numerical model can produce accurate ISWs coupled with a current. It can be found that the hydrodynamic forces on the submarine decrease with the increment of pycnocline thickness. The moving speed of the submarine performs a significant effect on the horizontal force, but a light effect on the vertical forces and the torque. It is also found that the forces on the moving submarine cannot be considered as the linear superposition of the navigation resistance in still water and the forces induced by ISWs.
Wavelength is an important component of water waves. Realizing the active control of wavelength is of great significance for the protection of offshore structures and the development of wave energy. In this study, a circular wavelength modulator is proposed based on the space transformation method, which can reduce or amplify the wavelength arbitrary. The transformed spaces of a wavelength reducer and a wavelength amplifier are designed. According to the form invariance of the water-wave governing equation, the anisotropic medium parameters including water depth and gravity acceleration in the modulation fields are obtained, which means the wave control can be realized in ordinary spaces instead of in the deformed transformed spaces. The wave distributions in the modulation fields are calculated by solving the Helmholtz equation to validate the proposed wavelength modulator. It is found that the wavelength can be manipulated as expected with the anisotropic medium. In addition, the results show that the wavelength is controlled due to the scattering of the anisotropic medium. Moreover, the proposed wavelength modulator is frequency independent and omnidirectional.
The stability performance of the buoy is an important parameter that should be taken into account when designing marine buoys. This paper introduces a theoretical and numerical analysis method to examine the stability of marine buoys, including analysis of the initial stability and large inclination stability by calculating the natural period, metacentric height, static stability, and dynamic stability, deriving the calculation process of the static stability lever in detail to obtain the righting moment, and so on, showing that the designed buoy in this paper has sufficient stability performance with theoretically excellent resistance performance to the wind and waves. Additionally, the hydrodynamic performance of the buoy at different heights is also further analyzed for structural optimization, which concluded that the buoy would have a more balanced stability performance when the buoy’s width-to-height ratio is 0.375–0.5, hoping that the computational model and ideas used in this paper can provide a reference for the theoretical stability analysis and buoy design of other types of buoys.
About Me
Reserch interests include water waves, wave structure interaction, ocean renewable energy, underwater propulsionetc.
Reserch interests include water waves, wave structure interaction, ocean renewable energy, underwater propulsionetc.