Liang Zhang

Dr. Liang Zhang

Beihang University, Beijing, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XXXinglu Xia
Xinglu Xia
DMDongli Ma
Dongli Ma
LZLiang Zhang
Liang Zhang
XLXing'an Liu
Xing'an Liu
KCKeran Cong
Keran Cong
With the rapid development of vertical takeoff and landing (VTOL) aircraft, the blade design of a propeller suitable for VTOL aircraft with a wide range of operating conditions has become a challenging and popular task. This paper proposes a multi-objective optimization framework for a VTOL propeller using an inverse design method at the cruising stage, which is developed from the Betz optimum theory and blade element momentum theory (BEMT). Different from passing studies, the maximum thrust-to-weight ratio at hover (MTWRH) is taken as one of the two objectives in this paper, which is closely related to the wind-resistance capability and maneuverability during takeoff and landing. The other objective is the energy consumption of the whole mission profile. A fixed pitch propeller (FPP) and a variable pitch propeller (VPP) are both optimized using the proposed framework for the Vahana A3 tilt-wing aircraft and validated by the computational fluid dynamics (CFD) method. The influences of the level flight energy ratio, hover disk loading and cruising speed toward the optimization result are analyzed, respectively. The results show that the MTWRH has a significant impact on the optimization result both for the FPP and VPP. A comparison between the two propeller forms validates the advantages of the VPP both in energy saving and takeoff maneuverability. The quantitative rules of this advantage with the level flight energy ratio are calculated to provide a reference for choosing the appropriate form. Overall, the methodology and general rules presented in this paper support the propeller optimization and form selection for VTOL aircraft.

21 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YYYuan Yao
Yuan Yao
DMDongli Ma
Dongli Ma
LZLiang Zhang
Liang Zhang
XYXiao Peng Yang
Xiao Peng Yang
YYYayun Yu
Yayun Yu
Ultra-high-altitude unmanned aerial vehicles have created a high demand for the performance of propellers under low Reynolds numbers, while the efficiency of such propellers by the existing design framework has reached a bottleneck. This paper explores the possibility of extending the Gurney flap on low Reynolds number propellers to achieve efficiency breakthrough. An iterative optimization strategy for propellers with Gurney flaps is established, in which cross-sectional airfoils can be continuously optimized under updated Reynolds numbers and lift coefficients. A computational fluid dynamics (CFD) simulation based on the γ-Reθ model was used as an aerodynamic analysis method. Propellers with and without Gurney flaps were optimized successively. Optimal results were analyzed using the CFD method. Results showed that an optimal propeller with a Gurney flap can achieve an efficiency of 82.0% in cruising conditions, which is 1.8% higher than an optimal propeller without a Gurney flap. Compared with the latter, the consumed power of the optimal propeller with a Gurney flap can be reduced by 2.2% with the same advance speed. Furthermore, the variation of the improvement by the Gurney flap propeller, along with its Reynolds number, was studied. A wind tunnel test indicates that the performance of the propellers obtained by the CFD method are in good agreement with the test results.

9 July 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
CYChengen Yuan
Chengen Yuan
DMDongli Ma
Dongli Ma
YJYuhong Jia
Yuhong Jia
LZLiang Zhang
Liang Zhang
Aerodynamic/stealth optimization is a key issue during the design of a stealth UAV. Balancing the weight of different incident angles of the RCS and combining stealth characteristics with aerodynamic characteristics are hotspots of aerodynamic/stealth optimization. To address this issue, this paper introduces a radar detection probability model to solve the weight balance problem of incident angles of the RCS and a penetration efficiency model to transfer the multi-object optimization into single-objective optimization. In this paper, a parameterized model of a flying-wing UAV is selected as the research object. A gradient-free optimization algorithm based on the genetic algorithm is used for maximizing efficiency. The optimization model balances the influence of the RCS mean value and RCS peak value on stealth performance. Moreover, the model achieves an optimal entire life cycle penetration efficiency coefficient by balancing aerodynamic and stealth optimization. The results show that the optimized model improves the penetration efficiency coefficient by 13.84% and increases maximum flight sorties by 1.8%. These results prove that the model has a reasonable combination of aerodynamic and stealth optimization for UAVs undertaking penetration missions.

4 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LZLiang Zhang
Liang Zhang
DMDongli Ma
Dongli Ma
MYMuqing Yang
Muqing Yang
YYYuan Yao
Yuan Yao
YYYayun Yu
Yayun Yu
XYXiao Peng Yang
Xiao Peng Yang
Flexible membrane structure is generally used as wing skin for long-endurance low-speed aircraft, such as solar aircraft, to control the structure weight within the allowable range. Predictably, the elastic deformation of the membrane under complex loads will cause uncertain impacts on the aerodynamic performance. The existing research indicates that the deformation of the membrane wing is helpful to improve the aerodynamic characteristics. However, most of the research objects are non-thickness membrane wings. In this paper, wind tunnel experiments are performed on double membrane wings. The experiment results indicate that the membrane deformation behavior is related to the surface curvature distribution and will change the camber and thickness of the airfoil. The deformation has little effect on lift but has a significant effect on drag and pitching moment. On this basis, a high-precision fluid structure coupling analysis method for the wider range of research is introduced. The numerical analysis indicates that the deformation can delay the stall angle by 1°. Furthermore, based on the numerical results, suggestions on prestress setting during membrane skin laying are provided, and the numerical simulation results of two flexible skin wings are compared. The research results of this paper provide a scientific basis for the aerodynamic design and analysis of long-endurance low-speed aircraft.

7 December 2023 in Chinese Journal of Aeronautics
Verified
Journal Article
Open access
YYYayun Yu
Yayun Yu
DMDongli Ma
Dongli Ma
LZLiang Zhang
Liang Zhang
XYXiao Peng Yang
Xiao Peng Yang
HGHao Guan
Hao Guan
In this paper, a stiffening design imitating the bamboo node is proposed for weight reduction of the long composite pipe beam subjected to bending load. The distribution of bamboo nodes can efficiently suppress the ovalization of the section, thus significantly improving the bending resistance of the bamboo. Based on this principle, ring stiffeners are proposed to be fixed to the pipe beam, making the long beam equivalent to the combination of a series of short pipes that suffered less section ovalization. A database of the optimal laminate orientations for different normalized lengths is obtained through optimizations, where the discreteness of the ply count is considered. Based on this database, weight optimizations are conducted, and the optimal designs of beams with and without stiffeners are obtained and compared. The comparison results show that the proposed bamboo-like stiffened beam not only regains a near-linear load–displacement relationship, but also reduces the weight by up to 16% under the same buckling load. In addition, it is found that for the pipe beams with radius-to-thickness ratios of more than 18, increasing the radius leads to a decrease in elastic buckling resistance when the weight remains a constant, which is opposite to the design for strength and stiffness. The model and database developed in this paper can provide a reference for weight reduction design and weight estimation for composite pipe beams.

30 October 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
LZLiang Zhang
Liang Zhang
DMDongli Ma
Dongli Ma
MYMuqing Yang
Muqing Yang
XYXiao Peng Yang
Xiao Peng Yang
YYYayun Yu
Yayun Yu
Currently, several solar-powered unmanned aerial vehicles (UAVs) have achieved 24 h uninterrupted cruise. However, models that can cruise for weeks or even months without interruption are in the minority. The technological progress requires the improvement of subsystems and also depends on the accurate planning of flight profile and power spectrum in a long working cycle. Combined with the test data obtained during the development of a solar-powered UAV, this paper establishes systematic mathematical and physical models of aerodynamic, energy, and propulsion systems, which can reflect the change in performance parameters with flight conditions and the performance attenuation with time. Further, a track control strategy based on the principle of maximum energy utilization is proposed, and the energy balance model of each flight stage is established. On the basis of the strategy, the typical flight profile and power spectrum of a solar-powered UAV are analyzed. Finally, the input parameters are decomposed into task parameters (takeoff time window, flight season, flight latitude, takeoff weight) and performance parameters (lift–drag ratio, secondary battery density), and their effects on mission feasibility are studied respectively. The research methods and conclusions of this paper have reference significance for the mission and track planning of solar-powered UAVs.