With the structural health monitoring technique, several medium- and small-span bridges possessing the same or similar structural characteristics located in a local road network are simultaneously monitored within one cluster. Nevertheless, insufficient research has been performed on detecting the damage of all the bridges monitored within one cluster under time-varying environmental temperatures. To address this issue, a method is proposed to assess the damage in all the bridges within one cluster utilizing the residual between the cumulative distribution functions of strain monitoring data. First, an algorithm for reconstructing the strain monitoring dataset is introduced, effectively improving the computational efficiency at removing as much measured noise from a large amount of monitoring data as possible. Second, a cluster analysis algorithm considering the similarity among the strain monitoring data at different measured points is proposed to classify the strain monitoring data for all the bridges monitored within one cluster. Different classes of strain monitoring data are established by identifying similar probability distribution patterns. Third, for each class, a damage detection index is proposed based on the residual between the cumulative distribution functions of strain monitoring data. All the bridges monitored within one cluster are acted upon by similar environmental temperatures during the same monitoring period; hence, the effects of the environmental temperature on the proposed index are mitigated indirectly during the same monitoring period. Thus, the proposed index is implemented to effectively detect the damage in all the bridges belonging to each class. Finally, the effectiveness of the proposed method is demonstrated through a numerical simulation and with strain monitoring data obtained from actual bridges.
The diagnosis of damage in a bridge superstructure using quasi-static strain influence lines (ILs) is promising. However, it is challenging to accurately localize the damage in a bridge superstructure due to limited numbers of strain IL measurement points and inconsistencies between the loading conditions before and after damage. To address the above issues, the Brillouin optical time domain analysis (BOTDA) technique is first applied to bridge damage localization using quasi-static strain ILs, and the number of strain IL measurement points is substantially increased. Additionally, a damage localization index based on quasi-static strain ILs that is independent of differences in the loading conditions before and after damage is proposed to localize damage in the superstructure of a beam bridge. Finally, the effectiveness of the proposed method is demonstrated through both numerical analysis and measured data from a quasi-static test of a model bridge.
27 May 2017 in Computer-Aided Civil and Infrastructure Engineering
The material properties and structural stiffness of actual bridges fluctuate with variations in environmental temperature; therefore, it is not appropriate to use a determined finite element model (FEM) as the baseline model for localizing the structural damage of bridges. To address this issue, we proposed the concept of the probabilistic baseline of FEM of bridges under variable environmental temperature, that is, we established reasonable probability distributions of the physical parameters of bridges that are suitable for damage localization with varying environmental temperature. First, a method is presented to obtain the probabilistic baseline of FEM of bridges, which imports cluster analysis into stochastic FEM updating. Unlike the conventional methods, the measured natural frequencies first are classified into different clusters using the Gaussian mixture method (GMM), with each cluster consisting of measured data that satisfy the same Gaussian distribution. Then, the conventional methods of stochastic FEM updating can be conveniently implemented to obtain the probabilistic baseline of FEM for each cluster. Second, for each cluster, the mean values and covariance of the updating parameters are updated in two sequential steps, and a new approach is proposed for determining the initial covariance of the updating parameters. The results of an actual example show that predetermining a reasonable initial covariance for the updating parameters can accurately and efficiently obtain the updated results. Finally, the effectiveness of the presented method is verified through the monitoring data of an actual bridge.
Quasi-static strain influence lines (ILs) based on the Brillouin optical time domain analysis (BOTDA) technique have been proposed to effectively locate damage in beam bridges. Using measurement points with a high spatial resolution, the BOTDA technique supplies enough strain ILs to help detect damage in bridges. Unlike quasi-static strain ILs based on the BOTDA technique, quasi-static displacement ILs are relatively easy to implement in actual bridges; furthermore, only a few quasi-static displacement ILs are necessary for actual bridges. On this basis, an improved method is proposed to determine the existence of damage in beam bridges by using only a few quasi-static displacement ILs. First, the Hankel matrix of the damage feature, established based on the number of strain ILs, is reconstructed to generate the damage feature using only a few quasi-static displacement ILs. Second, the method used to obtain the metric for evaluating the damage feature is improved, thereby greatly increasing the efficiency of damage detection using quasi-static ILs. Finally, the effectiveness of the proposed method is demonstrated through both numerical analysis and experimentally measured data obtained during a quasi-static load test of a model bridge.
Updating the structural model of complex structures is time-consuming due to the large size of the finite element model (FEM). Using conventional methods for these cases is computationally expensive or even impossible. A two-level method, which combined the Kriging predictor and the component mode synthesis (CMS) technique, was proposed to ensure the successful implementing of FEM updating of large-scale structures. In the first level, the CMS was applied to build a reasonable condensed FEM of complex structures. In the second level, the Kriging predictor that was deemed as a surrogate FEM in structural dynamics was generated based on the condensed FEM. Some key issues of the application of the metamodel (surrogate FEM) to FEM updating were also discussed. Finally, the effectiveness of the proposed method was demonstrated by updating the FEM of a real arch bridge with the measured modal parameters.
A superelement-based virtual distortion method (VDM) was proposed to improve the efficiency of the finite element model (FEM) updating of large-scaled bridges by using static information. On one side, VDM was deemed as a new type of metamodel for static analysis of structures, i.e., a surrogate model of FEM for bridges. In this way, the efficiency of FEM updating could be improved dramatically because massive iterative calculations need to be implemented during the process of FEM updating. On the other side, the superelement was applied to reduce the size of the influence matrix which was the kernel of building VDM; therefore, it is effective to enhance the efficiency of generating the metamodel (VDM) of large-scale bridges. Finally, with the measured static deformation data, the effectiveness of the proposed method was demonstrated by updating the FEM of a practical bridge.