The state of health (SOH) of lithium-ion batteries (LIBs) is a critical parameter of the battery management system. Because of the complex internal electrochemical properties of LIBs and uncertain external working environment, it is difficult to achieve an accurate SOH determination. In this study, we proposed a novel SOH estimation method by using prior knowledge-based neural network (PKNN) and Markov chain for a single lithium-ion battery. Firstly, we extract multiple features to capture the battery aging process. Due to its effective fitting ability for complex nonlinear problems, the neural network with prior knowledge-based optimization strategy is adopted for the battery SOH prediction. The Markov chain, with the advantageous prediction performance for the long-term system, is established to modify the PKNN estimation results based on the prediction error. Experimental results show that the maximum estimation error of the state of health is reduced to less than 1.7% by adopting the proposed method. By comparing with the Group Method of Data Handling (GMDH) and back propagation neural network in conjunction with Levenberg-Marquardt algorithm (LMNN), the proposed estimation method obtains the highest SOH accuracy.
3 May 2022 in IEEE Transactions on Industrial Electronics
Accurate state-of-health (SOH) estimation for a data-driven method is still a great challenge, as real SOH is difficult to measure during the actual application of a lithium-ion battery, and the noise or sensor failure may be also involved. To face these challenges, we propose a novel regression generative adversarial network to obtain a general model for batteries with the same specifications. First, we develop the generator to automatically generate auxiliary training samples with similar but different distributions with real samples, which acts as data augmentation. Meanwhile, the discriminator is designed to detect anomalous aging indicators by learning the distribution of real samples, which is without the requirement of collecting anomalous samples. To capture shallow general aging knowledge, a shallow layer sharing mechanism between the discriminator and regressor is developed for regularization benefit. Finally, we propose a general model building rule based on the optimal correlation between SOH and features. The experimental results show our general model rule is effective for collected datasets of both LiNCM and LiFePO 4 batteries. For datasets with small correlation differences, the effectiveness of the general model is no longer limited by the selection of datasets. Besides, compared to other advanced models, our method could achieve superior prediction performance.
14 August 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Lithium-ion batteries (LIBs) have become the main power source for electric vehicles and energy storage systems. But the hazardous overcharging and overheating can be easily occurred during improper operations or accidents, which are urgent problems to be improved. Therefore, excellent core temperature and state of charge (SOC) estimations are indispensable prerequisites for safe and efficient applications of LIBs. However, the core temperature and SOC play important roles in each other due to coupled electrochemical reactions inside LIBs, so that their accurate co-estimation is difficult to achieve. Aiming to tackle this problem, this paper proposes an electro-thermal model consisting of a temperature-dependent dual polarization equivalent circuit model and a two-state thermal model. And the dual time windows method and particle swarm optimization algorithm are used to identify model parameters. Then, dual unscented Kalman filters are integrated with the electro-thermal model to achieve accurate and adaptive co-estimation of core temperature and SOC. The experiments are finished under different ambient temperatures and dynamic conditions. The results quantitatively verify the accuracy and robustness of the proposed co-estimation algorithm. Furthermore, the comparisons with other methods demonstrate the superiority of states estimation performance.
20 December 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Temperature is a crucial parameter that determines the safety and reliability of lithium-ion batteries (LIBs) in electric vehicles and energy storage systems. Estimating LIBs temperature for battery management system state monitoring and thermal control, especially the core temperature is essential. However, the core temperature cannot be obtained directly and must be estimated via other measurable variables. To this end, this paper proposes a method to estimate the core temperature of LIBs based on the long short-term memory (LSTM) method combined with transfer learning (TL). Through this method, the relationship between core temperature and measured variables can be obtained. Moreover, the TL procedure, with its fine-tuning strategy, can substantially reduce the computation burden when used to estimate the core temperature of other LIBs via a reduced training set. In addition, the applicability of the proposed method is verified via a long period cycle test. The experimental results demonstrate that the proposed method can precisely estimate the LIB core temperature in ambient temperatures of between -10°C and 55°C in highly dynamic driving cycles and aging cycle tests, and the maximum RMSE is 0.3302°C. The LSTM-TL method has a high accuracy compared with other widely used methods.