Uneven subgrade frost heave has been a severe problem for the operation of high-speed railways in cold regions. In order to reveal the influencing mechanism of frost heave on the vehicle-track system, a novel FEM (finite element method) model based on an explicit algorithm was proposed. In the novel model, the existence of the leverage effect in slab track, which was caused by frost heave, was realistically reproduced at first, and then the vehicle model started running for evaluating the influence of the frost heave on the whole dynamic system. Results show that the leverage effect plays a key role in analyzing the influence of frost heave on the vehicle-track system, besides for track irregularity and contact loss. Specifically, the leverage effect decreases the stability of the slab track and causes an increase in dynamic irregularity. The roles of the track irregularity and the contact loss in the influencing mechanism were also revealed. With the ratio of wavelength to amplitude increasing, the track irregularity is gradually dominant in the influence mechanism of frost heave on the vehicle-track system. The research could provide a reference for the management and maintenance of the slab track in cold regions.
Crack propagation produced by frost heave affects the durability of slab-track structures in high-humidity and cold regions in China. This work is intended to reveal the evolution laws of frost-heave crack propagation, establish evaluation criteria for crack propagation, and investigate factors involved in frost-heave crack propagation. Firstly, by preparing slab-track specimens with initial cracks, an experiment of frost-heave crack propagation was designed. The process of frost-heave crack propagation was carried out by means of digital image correlation (DIC) technology and acoustic emission (AE) technology, respectively. These experiments revealed the evolution laws of generalized strain and AE events’ location during crack initiation and propagation, respectively, and the key parameters of micro-crack initiation strain and unstable propagation strain were obtained. By using theoretical and experimental analysis, a double-strain criterion for frost-heave crack propagation was proposed. Finally, factors involved in frost-heave crack propagation were investigated. The results show that crack initiation can be reflected by the crack-tip strain. The average micro-crack initiation strain and unstable propagation strain were found to be 224 με and 243 με, respectively. Moreover, it was found that the frost-heave crack propagation was caused by an ice plug which formed at the crack opening. When the crack width is larger than 2.7 mm and the external temperature is lower than −6.6 °C, cracks propagate easily under the frost-heave force.
The interlayer properties of the CRTS III slab track during construction directly affect its long-term service condition. This article introduces time-varying coefficients that characterize the early properties of the interface between track slab and SCC to improve the bilinear CZM. Based on this, an interlayer property evolution model of the CRTS III slab track during construction is established. The evolution mechanism of interlayer properties under complex loads and the influence mechanism of key parameters on them are revealed. The results show that after SCC pouring, the interlayer damage at the corner of the slab becomes a sensitive area due to the combined effects of SCC shrinkage and temperature gradients. Interlayer damage initially manifests at the corner of the slab before progressively spreading toward the center of the slab, influencing the composite performance and force transmission characteristics of the track structure. The interlayer bonding property, shrinkage performance of SCC, and construction temperature substantially affect interlayer damage evolution. To reduce the risk of damage, mineral admixtures and expansion agents can be added as additives to improve the bonding property and minimize shrinkage of SCC. Insulation measures should be taken for SCC during low-temperature construction, and SCC pouring construction below 0 °C and above 30 °C should be avoided.
The problem of excessive wear of pantograph strips frequently occurs on China’s Z City Metro Line 1. After on-site investigation and analysis by the metro operating company, it was speculated that the problem was related to abnormal track irregularities. Therefore, taking Z City Metro Line 1 as the main research object, the measured track irregularity of the whole line was analyzed and compared with other typical track spectra, and a track-vehicle-pantograph-catenary coupling dynamics model was established to analyze the relationship between the pantograph-catenary dynamic characteristics and the track irregularity. The two frequency ranges of the track irregularity that have a significant impact on the pantograph-catenary contact were found. Finally, after numerical calculation and analysis, it is recommended to focus on the irregularities with the two wavelength ranges of 9~16 m and 3~4 m in the maintenance.