The caudal fin of a fish is one of the main determinants of various maneuvering motions. In this paper, the evolutionary characteristics of the leading-edge vortex (LEV) induced by three kinds of forked caudal fins with different chord lengths are studied. Numerical results show that the emergence and development of the LEV are directly related to the distribution law of the angle of attack (AoA) caused by the leading-edge configuration. However, when adopting a fixed motion mode, any temporal evolution in the AoA of the leading-edge location is determined by the distance between the leading-edge location and the pitching axis, the combined effects of heaving and pitching motions, and the Strouhal number. An increase in the chord length enhances the strength of the LEV, leading to more vortex-augmented thrust. Nonetheless, the chord length of a forked caudal fin cannot be extended indefinitely as this will alter the temporal evolution of the AoA and seriously delay the generation of the LEV. Our research is helpful in understanding how the locomotor force is derived from the motion of the caudal fin and provides a reference for biomimetic roboticists to choose appropriate propellers for underwater vehicles.
The efficient swimming of fish is closely linked to their unique body morphology. This study seeks to explore the impact of body morphology on hydrodynamic performance through numerical analysis. Initially, the investigation focuses on carangiform swimmers with varying thicknesses, denoted by the thickness coefficient ψ. Key performance indicators such as vortices, velocity, pressure, thrust, and energy consumption are analyzed. The findings reveal a notable phenomenon of vortex deflection in self-propelled studies, which is affected by the interplay between initial vortices and flow conditions. Specifically, the carangiform swimmer with ψ = 1.4 exhibits the highest thrust but also the greatest energy consumption. In contrast, the swimmer with ψ = 0.8 demonstrates the best acceleration and steady swimming speeds with moderate energy usage. This paper provides new insights into how body morphology influences self-propulsion in aquatic environments.
This work focuses on flow past a circular cylinder at a subcritical Reynolds number. Although this classical study has been a concern for many years, it is still a challenging task due to the complexity of flow characteristics. In this paper, a high-efficiency very large-eddy simulation method is adopted and verified in order to handle the oscillating boundary. A series of numerical simulations are conducted to investigate the transient flow around the oscillating cylinder. The results show that the vortex shedding mode varies with an increase in the excitation amplitude and the excitation frequency. Vortex shedding is a lasting process under the condition of a low excitation amplitude that leads to irregular fluctuations of the lift and drag coefficients. For a vortex shedding mode that exhibits a strong vortex pair and a weak vortex pair or a weak single vortex, the temporal evolution of the lift coefficient of the oscillating cylinder shows irregular ”jumping” at a specific time per cycle corresponding to the shedding of the strong vortex pair. The vortex shedding mode and the frequency and time of the vortex shedding co-determine the temporal evolutions of the lift and drag coefficient.
When designing the internals of robotic fish, variations in the internal arrangements of power and control systems cause differences in external morphological structures, particularly the positions of maximum thickness. These differences considerably affect swimming performance. This study examines the impact of the topological structure of self-propelled fish-like swimmers on hydrodynamic performance using fluid–structure interaction techniques. Fish-like swimmers with maximum thickness closest to the head exhibit optimal swimming performance, characterized by modest energy consumption for fast-response acceleration during the starting phase and higher swimming velocity for high-speed travel during steady swimming. As the maximum thickness moves toward the middle, acceleration performance significantly weakens and swimming speed decreases, although maximum energy consumption is relatively reduced. This study will provide a notable reference for the morphological design of underwater robotic fish.
A circular expanding duct features an increasing cross-sectional area that tends to excite higher-order modes at low frequencies, thereby affecting the performance of acoustic devices. Studying the acoustic propagation characteristics of circularly expanding ducts is thus crucial for optimal design and noise control. Traditional prediction methods do not adequately account for three-dimensional wave effects inside a duct. This study investigates the sound attenuation performance of various circular expanding ducts in the frequency range of 10–2500 Hz using the three-dimensional finite element method in combination with acoustic theory. The results show that the geometric expansion of the duct changes the wavefront shapes of transmitted sound waves, causing varying degrees of wavefront distortion. Behind the expanding region, these distorted wavefronts interfere with each other to varying extents, affecting the transmission loss (TL) of the duct. When the length of the expanding section is shorter, the average attenuation is generally higher. However, at specific frequencies (e.g., 2100 Hz), a longer expanding section may enhance sound attenuation by exciting more resonant modes. As the expansion ratio of the cross-sectional area increases, wavefront distortion and modal resonance become more pronounced, leading to increased average attenuation and the appearance of more peaks in the TL curve. In addition, the incidence of higher-order modes induces complex modal coupling and interference, significantly reducing the average sound attenuation of the duct. This study provides theoretical foundations and reference values for optimizing the design of circular expanding ducts to improve acoustic performance.
In nature, the locomotion and maneuvering force of fish with thunniform mode crucially originate from the flapping foil as a principal component to produce thrust. Aiming to investigate the thrust performance and hydromechanical efficiency of flapping hydrofoil, a very large eddy simulation (VLES) method is introduced into dynamic mesh technique to solve the unsteady flow past flapping hydrofoil. The method can broaden the simulation of complex separated flow along with excellent compromise of accuracy and computing resources. In addition, the feasibility and validation of the method are verified to be well fit for dynamic mesh technique. The optimal propulsion performance is explored through varying the Strouhal (St) number and maximum angle of attack (α0) in an incoming flow condition of Re = 40,000. The temporal evolution of the angle of attack has a significant impact on lateral force coefficient, moment coefficient and the structure of shedding corotating vortices in the wake for high St number. The α0 exerts evident effect on the leading-edge separation. With the increase of St, the low-pressure values of suction surface become greater and the low-pressure areas become wider, hence producing more vortex-augmented thrusts and longer active time. The highest efficiency is equipped with the higher growth rate of thrust coefficient and moderate wake vortex strength. Furthermore, the temporal evolution of angle of attack has little effect, as does the leading-edge separation. In reality, an insight about high efficiency combined with high thrust should be considered in order to arrive to well-behaved propulsion system.