An output cavity operating in hybrid TM 01 -TM 02 modes is investigated for the sake of producing repetitive high power microwaves (HPMs) in coaxial electromagnetic structures. To suppress anode plasma formation, the generated microwave is changed to be extracted inwards, so that the intense electron beam can be collected on the outer conductor, which makes beam collector cooling feasible practically in this topology. The issue of radio frequency breakdown is addressed by using a large extraction waveguide, and particularly the external quality factor required for optimal beam wave interaction is achieved by adjusting mode coupling. The design is examined in an X-band triaxial klystron amplifier by particle-in-cell simulation, which shows HPM with a power of 2 GW can be generated with an efficiency of about 36%.
A cross-band frequency hopping high power microwave (HPM) oscillator with permanent magnet package was proposed. The oscillator comprises of an inner Ku-band hollow oscillator and an outer C-band coaxial oscillator. By comparing with other cross-band HPM oscillators, this device is quite compact and high efficiency, for the guiding magnetic field is as low as 0.43 T, which is provided by a 74 kg permanent magnet. Since the cathode can be adjusted telescopically to produce annular electron beams at different radius, different bands HPMs can be generated in the inner and the outer slow wave structure. Verified by particle-in-cell simulation, a HPM with a frequency of 7.8 GHz and a power of 3.1 GW is achieved for C-band, corresponding to a power efficiency of 45%. Respectively, a Ku-band HPM output with a frequency of 14.4 GHz and a power of 1.3 GW were obtained, corresponding to a power efficiency of 45%.
21 September 2021 in IEEE Transactions on Electron Devices
The power conversion efficiency of relativistic klystron amplifiers (RKAs) is severely limited by the strong space-charge repulsion force caused by the intense electron beam. A radial-line RKA (RL-RKA) driven by the disk beam may provide great potentials to alleviate this issue due to its radially propagating characteristic of the electron beam. However, such potential advantage of high efficiency has not been fully exploited in previous research due to the insufficient beam modulation and relatively low beam-wave coupling strength. In this article, an initial RL-RKA is improved significantly by utilizing a three-stage cascaded bunching link, a four-gap output cavity, and a lengthened drift tube. The three-stage cascaded bunching link plays a role in increasing the fundamental harmonic current and decreasing the velocity spread of the electron beam simultaneously. The four-gap output cavity is designed to improve the coupling impedance and strengthen the beam-wave power conversion. Moreover, a drift tube is lengthened suitably to boost the fundamental harmonic current further. Eventually, the power conversion efficiency of the RL-RKA is enhanced up to 67% by these measures, which indicates a significant advance over the initial state of 38%.
23 March 2020 in IEEE Transactions on Plasma Science
The inevitable power leakage of the TEM mode in relativistic triaxial klystron amplifier (TKA) devices will cause energy coupling between different beam-wave interaction cavities, which could interfere or even damage the stable operation of the devices. Specially designed mode reflectors have been proposed to suppress the power leakage of the TEM mode in TKA devices. The design and optimization methods of the reflectors have been investigated systematically in this article. The research results show that a reflector is essentially a high-order mode cavity, and the frequency of this mode is close to the operation frequency of the devices. Furthermore, the effects of reflector loading on the cavities are investigated and compound modulation of multiple cavities with reflectors is examined. The simulation results demonstrate that the loading of downstream cavities will aggravate the energy coupling between the upstream cavities. To achieve the isolation of cavities in multireflector devices, the eigenfrequencies of the two reflectors in front of the bunching cavities should be separated as far as possible. With the employment of three carefully designed reflectors, the power leakage of the TEM mode is controlled within an acceptable range and no parasitic frequency self-excitation is observed inside a proposed Ku-band TKA device.
16 February 2022 in IEEE Journal of the Electron Devices Society
To achieve modular integration of relativistic triaxial klystron amplifier (TKA) devices and reduce the energy consumption of the whole high-power microwave (HPM) system, a compact Ku-band TKA packaged with permanent magnets is proposed and investigated in this paper. By optimizing the electromagnetic structure and utilizing TEM mode energy coupling, the length of the uniform magnetic field area required for the Ku-band TKA is reduced from 32 cm to 19.6 cm, with a reduction rate of 39%. By utilizing the NdFeB-N50M mainly magnetized in the ${R}$ direction, a permanent magnet guiding system weighing 90 kg is proposed. Besides, the length of the uniform zone is 20 cm with a longitudinal magnetic field of 0.5 T. Verified by the PIC simulation software CHPIC, an HPM with power of 430 MW and frequency of 14.25 GHz is generated when the diode voltage, current, and the injected microwave power are 340 kV, 4.2 kA, and 15 kW, respectively. The phase jitter of the output microwave is controlled within ${\pm } 5{^\circ }$ , which is beneficial to the coherent power combination of modular integrated TKA devices
12 April 2023 in IEEE Transactions on Electron Devices
An improved three-gap bunching cavity is proposed for the suppression of mode competition in a triaxial klystron amplifier (TKA). With the theoretical analysis and simulation verification, we find that the asymmetric TM $_{\text{612}}$ , TM $_{\text{712}}$ , and TM $_{\text{812}}$ modes of the initial bunching cavity are easily excited by the electron beam due to their negative beam-loading conductance ratios and small frequency interval between TM $_{\textit{n\text{12}}}$ and TM $_{\textit{n}\text{13}}$ modes. To solve this issue, an improved three-gap bunching cavity is designed on the one hand to change the beam-loading conductance ratios of the three modes into nearly positive and, on the other hand, to increase the frequency interval between TM $_{\textit{n}\text{12}}$ and TM $_{\textit{n}\text{13}}$ modes to over 1 GHz. In addition, a reflector loaded before the bunching cavity is removed to eliminate the self-oscillation of two reflectors by increasing the external quality factor of the bunching cavity and choosing a specific drift tube length between the input and bunching cavity. The improved bunching cavity is further examined in an $\textit{X}$ -band TKA by 3-D particle-in-cell simulation, which shows that high power microwave (HPM) with a peak power of 1.2 GW is generated corresponding to an efficiency of about 33%, and there is no mode competition during 300-ns simulation time.