An improved multi-objective design optimization framework is proposed for the efficient design of proprotor blades tailored to specific high-altitude mission requirements. This framework builds upon existing methods by leveraging a reformulated Vortex Particle Method (rVPM) and incorporates three key stages: (1) rapid determination of overall proprotor parameters using a semi-empirical model, (2) optimized blade chord and twist distribution bounds based on minimum energy loss theory, and (3) global optimization with a high-fidelity rVPM-based aerodynamic solver coupled with a multi-objective hybrid optimization algorithm. Applied to a small high-altitude tiltrotor, the framework produced Pareto-optimal proprotor designs with a figure of merit of 0.814 and cruise efficiency of 0.896, exceeding mission targets by over 15%. Key findings indicate that large taper ratios and low twist improve hover performance, while elliptical blade planforms with high twist enhance cruise efficiency, and a tip anhedral further boosts overall performance. This framework streamlines the industrial customization of proprotor blades, significantly reducing the design space for advanced optimization while improving performance in demanding high-altitude environments.

To enhance the performance of rigid coaxial rotors across both hovering and high-speed cruising conditions, this study develops a novel aerodynamic optimization method that differentiates between the upper and lower rotors. Utilizing the lifting line and reformulated viscous vortex particle method (rVPM), this approach models the complex wake fields of coaxial rotors and accurately assesses the aerodynamic loads on the blades. The optimization of geometric properties such as planform configuration and nonlinear twist is conducted through an innovative solver that integrates simulated annealing with the Nelder–Mead algorithm, ensuring both rapid and comprehensive optimization results. Comparative analyses demonstrate that these tailored geometric adjustments significantly enhance efficiency in both operational states, surpassing traditional methods. This research provides a strategic framework for addressing the varied aerodynamic challenges presented by different flight states in coaxial rotor design.

This paper investigates an adaptive fault-tolerant control strategy for the Twin Otter aircraft, aimed at addressing critical challenges arising from system uncertainties and actuator faults. A global prescribed performance function is employed to ensure pre-determined transient and steady-state tracking performance under uncertainties and faults. Differing from existing prescribed performance controllers, the proposed approach is characterized by (1) no limitation on the initial tracking error; (2) no requirement for tracking error normalization; and (3) incorporation of an improved monitoring function. Specifically, this novel monitoring function dynamically adjusts prescribed error bounds based on real-time fault information, thus enhancing flexibility and robustness. Furthermore, fixed-time convergence of the tracking error is rigorously guaranteed, significantly improving system reliability and safety. Although the simplified Twin Otter aircraft model analyzed herein is a second-order parametric strict-feedback system, the theoretical framework extends naturally to higher-order strict-feedback systems. The effectiveness and advantages of the proposed method are validated through theoretical analysis and numerical simulations on a Twin Otter aircraft system with time-varying parameters and actuator faults.