Selected thermal properties of different types of polyethylene waxes, i.e. by-products formed in ethylene low-pressure polymerization process, physically and chemically modified waxes are presented in the study. Temperatures of phase transitions and relevant thermal effects were defined using DSC method. Additionally, drop point and penetration of waxes were determined. It was established that fractionation of waxes (physical modification) causes increase in their crystallinity and oxidation (chemical modification) decreases ability for crystallization.
Test results of changing the thermo-rheological properties of coal-tar pitch under influence of phenol-formaldehyde resin are presented in this research work. Influence of modifying agent amount and crosslinking conditions (time) of resin in bitumen was evaluated. Tests were carried out using the rheometer in oscillation mode. They enabled the evaluation of changes in bitumen viscous and elastic properties and draw the conclusions about changes in bitumen structure on that basis. Compositions of the coal-tar pitch with phenol-formaldehyde resin show increased thermal and mechanical resistance. Furthermore, phenol-formaldehyde resin has an effect on increase in the coal-tar pitch viscosity. It probably results from the increased content of components of higher average molecular mass in the pitch and lower solubility in organic solvents.
29 October 2011 in Journal of Thermal Analysis and Calorimetry
The purpose of this study was to determine the possibility of producing hydrophobic mesoporous mineral–carbon sorbents from aluminum hydroxide and compositions of coal tar pitch–polymers on carbonization at 600 °C in a nitrogen atmosphere. Blends of the products of co-precipitation of aluminum hydroxide in the carbonaceous substances medium were subjected to carbonization process. The extent of porous structure development was evaluated using low temperature nitrogen adsorption, adsorption of benzene vapors, and adsorption of iodine from aqueous solution. The highest value of BET surface area of about 370 m2/g was achieved for the carbonization product obtained from co-precipitated raw components with 10 wt% compositions coal tar pitch–polymer. These materials demonstrated high capacity to reduce organic pollutions from sewage. Pitch–polymer composition containing poly(ethylene terephthalate) or phenol–formaldehyde resin was studied by the means of DSC method in order to determine the high-temperature transformations taking place under the conditions of carbonization. DSC method enables to determine i.a. the decomposition temperatures of carbonizates produced from pitch–polymer compositions and the evaluation of their sorption abilities. The additive of poly(ethylene terephthalate) and phenol–formaldehyde resin caused the increase of thermal resistance of the pitch expressed by higher decomposition temperatures.