Grzegorz Makomaski

Prof. Dr. Grzegorz Makomaski


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2021 in Materials
Verified
Journal Article
Open access
PDF file
JCJustyna Ciemnicka
Justyna Ciemnicka
KPKarol Prałat
Karol Prałat
AKArtur Koper
Artur Koper
GMGrzegorz Makomaski
Grzegorz Makomaski
ŁMŁukasz Majewski
Łukasz Majewski
Katarzyna Ewa ŁośKatarzyna Ewa Łoś
Katarzyna Ewa Łoś
The paper presents an assessment of the impact of using additives on the strength of a binding material, i.e., building gypsum, and also the phase transformation that takes place in it. Microspheres, aerogel and polymer (HEMC) additives were added to a building gypsum slurry with a water to gypsum ratio of 0.75. In order to investigate their influence on bending strength, compressive strength, and the effect of high temperatures, differential scanning calorimetry (DSC), as well as tests of the multicomponent binder, were carried out in accordance with the applicable PN-EN 13279-2:2005 standard. The obtained test results allowed to determine that the used additives influenced the strength parameters of the obtained composites. It was shown that the applied additives decreased the compressive and bending strength of the modified gypsum. Despite these properties, the obtained gypsum materials are environmentally friendly because they reuse wastes, such as microspheres. Out of all the applied additives, the use of microspheres in an amount of 10% caused a decrease in the bending strength by only 10%, and an increase in the compressive strength by 4%.

3 April 2012 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
GMGrzegorz Makomaski
Grzegorz Makomaski
WCWieslawa Ciesinska
Wieslawa Ciesinska
JZJanusz Zieliński
Janusz Zieliński

29 October 2011 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
DSDariusz Szychowski
Dariusz Szychowski
BPBarbara Pacewska
Barbara Pacewska
GMGrzegorz Makomaski
Grzegorz Makomaski
JZJanusz Zieliński
Janusz Zieliński
WCWieslawa Ciesinska
Wieslawa Ciesinska
TBTatiana Brzozowska
Tatiana Brzozowska
The purpose of this study was to determine the possibility of producing hydrophobic mesoporous mineral–carbon sorbents from aluminum hydroxide and compositions of coal tar pitch–polymers on carbonization at 600 °C in a nitrogen atmosphere. Blends of the products of co-precipitation of aluminum hydroxide in the carbonaceous substances medium were subjected to carbonization process. The extent of porous structure development was evaluated using low temperature nitrogen adsorption, adsorption of benzene vapors, and adsorption of iodine from aqueous solution. The highest value of BET surface area of about 370 m2/g was achieved for the carbonization product obtained from co-precipitated raw components with 10 wt% compositions coal tar pitch–polymer. These materials demonstrated high capacity to reduce organic pollutions from sewage. Pitch–polymer composition containing poly(ethylene terephthalate) or phenol–formaldehyde resin was studied by the means of DSC method in order to determine the high-temperature transformations taking place under the conditions of carbonization. DSC method enables to determine i.a. the decomposition temperatures of carbonizates produced from pitch–polymer compositions and the evaluation of their sorption abilities. The additive of poly(ethylene terephthalate) and phenol–formaldehyde resin caused the increase of thermal resistance of the pitch expressed by higher decomposition temperatures.

16 October 2014 in Colloid and Polymer Science
Verified
Journal Article
Open access
PDF file
GMGrzegorz Makomaski
Grzegorz Makomaski
In this work, the results of studies on the evaluation of colloidal structure of coal-tar pitch compositions with selected waste polymers by fluorescence microscope. For pitch-polymer compositions containing 10–50 wt% waste polymer, softening point, coking value and content of components insoluble in toluene and quinoline were carried out. The results indicate that pitch-polymer compositions can be treated as microheterogeneous systems, colloidal and biphase, generally exhibiting uniform dispersion of particles composed of polymer macromolecules and probably of α components of coal-tar pitch.

1 January 2011 in Polish Journal of Chemical Technology
Verified
Journal Article
Open access
PDF file
WCWieslawa Ciesinska
Wieslawa Ciesinska
GMGrzegorz Makomaski
Grzegorz Makomaski
JZJanusz Zieliński
Janusz Zieliński
TBTatiana Brzozowska
Tatiana Brzozowska
Preparation of sorbents from selected polymers: In this work, the results of studies on the preparation of sorbents from selected polymers were presented. The polymers were carbonized and subsequently physically activated by steam or carbon dioxide, or alternatively, chemically activated with potassium hydroxide. For the obtained materials, a specific area was evaluated by means of low-temperature nitrogen adsorption and benzene adsorption, iodine number was also determined. The obtained results indicated a possibility to procure hydrophobic sorbents of microporous structure. Sorbents having the best properties, i.e. the specific area of above 2000 m2/g were produced from poly(ethylene terephthalate) and phenol-formaldehyde resin.

1 September 2018 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
GMGrzegorz Makomaski
Grzegorz Makomaski
The study results of porous structure and thermal properties of carbon adsorbents (AC) obtained from pitch-polymer compositions were presented. The compositions were carbonized and activated with steam, potassium hydroxide, and magnesium and potassium carbonates. For the obtained AC, the thermal analysis and the determination of adsorption value of iodine and porous structure by adsorption/desorption of nitrogen at 77 K were carried out. The possibility of obtained activated carbons from pitch-polymer compositions was demonstrated. The use of untypical feedstock, as an effect of combination of bituminous substance with polymeric waste and improvement of the methods of production, creates the potential possibility to produce carbon adsorbents of interesting properties and porous structure.