khalil khalili

Prof. khalil khalili

orcid

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 April 2020 in Journal of Imaging
Verified
Journal Article
Open access
PDF file
MZMojtaba Zeraatkar
Mojtaba Zeraatkar
KKkhalil khalili
khalil khalili
The human body is one of the most complicated objects to model because of its complex features, non-rigidity, and the time required to take body measurements. Basic technologies available in this field range from small and low-cost scanners that must be moved around the body to large and high-cost scanners that can capture all sides of the body simultaneously. This paper presents an image-based scanning system which employs the structure-from-motion method. The design and development process of the scanner includes its physical structure, electronic components, and the algorithms used for extracting 3D data. In addition to the accuracy, which is one of the main parameters to consider when choosing a 3D scanner, the time and cost of the system are among the most important parameters for evaluating a scanner system in the field of human scanning. Because of the non-static nature of the human body, the scanning time is particularly important. On the other hand, a high-cost system may lead to limited use of such systems. The design developed in this paper, which utilizes 100 cameras, facilitates the acquisition of geometric data in a fraction of a second (0.001 s) and provides the capabilities of large, freestanding scanners at a price akin to that of smaller, mobile ones.

1 January 2015 in Procedia Technology
Verified
Journal Article
Open access
MDMahdi Danesh
Mahdi Danesh
KKkhalil khalili
khalil khalili
The state of a cutting tool is a critical factor in any metal cutting process because dull or damaged cutting tool reduces surface quality and dimensional accuracy of workpiece and damages the machine tool. This paper proposes a novel vision-based approach for determining tool wear in metal cutting. The surface irregularity changes caused by tool wear are used as a criterion for estimating the cutting tool wear. Undecimated Wavelet Transform is used to decompose the surface image of the workpiece into sub-images in which the cutting tool wear can be indicated. The texture of sub-images is analyzed using GLCM texture features. The experimental results showed that the combination of undecimated wavelet decomposition and GLCM texture features can be used as a robust method for determining tool wear in the turning process

18 August 2015 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Verified
Journal Article
Closed access
AAAmir Ashrafi
Amir Ashrafi
KKkhalil khalili
khalil khalili
Tube hydroforming is a process that uses internal pressure and axial feeding simultaneously to form a tube into a desired shape. The internal pressure provides the stress required to yield the material while axial feeding eases metal flow helping to produce a part without wrinkles and with even wall thickness. Pulsating pressure hydroforming applies loading path with fluctuating pressures. In this study, pulsating pressure hydroforming of T-joint part was examined experimentally. Six process parameters in pulsating pressure loading path were selected. Using Taguchi design of experiments with six parameters and two levels for each parameter, 12 experiments were conducted to study the effects of pulsating pressure parameters on the parts’ defects and shape accuracy. Signal-to-noise ratio and analysis of variance were employed to determine the important process parameters affecting the final part in terms of wrinkling, bulge height and wall thickness. Three linear regressions without any interaction between the parameters were extracted for three quality responses and were evaluated through three extra experiments that show the best levels for three responses. The results show reasonable agreement between the experiments and linear regression models.

1 January 2015 in Procedia Technology
Verified
Journal Article
Open access
SSS.E. Eftekhari Shahri
S.E. Eftekhari Shahri
SBS.Y. Ahmadi Boroughani
S.Y. Ahmadi Boroughani
KKkhalil khalili
khalil khalili
BKB.S. Kang
B.S. Kang
In tube hydroforming process, due to friction condition, uniform wall thickness and sharp corners may not be achieved. Use of ultrasonic vibration can improve the contact conditions at the tube-die interface. The current work studies the effect of applying ultrasonic vibration on wall thickness and corner filling of hydroformed tubes. In order to understand the process an analytical model based on geometric relationships and stress-strain states has been established. The wall thickness and corner radius of hydroformed tube can be obtained by solving the model. By comparing the results of the FEM models of tube in two cases of ultrasonic hydroforming (internal pressure along with the oscillations of the die) and conventional hydroforming (internal pressure only), the effects of vibration on wall thickness and corner filling are investigated. The results indicate superimposing ultrasonic vibrations to the process will increase corner filling ratio of the tube significantly, and more uniform tube wall thickness will be achieved

26 November 2020 in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
MEMojtaba Esmailian
Mojtaba Esmailian
KKkhalil khalili
khalil khalili

29 October 2022 in Materials Today Communications
Verified
Journal Article
Closed access
SKS. Khisheh
S. Khisheh
Mohammad AzadiMohammad Azadi
Mohammad Azadi
VHV. Zaker Hendoabadi
V. Zaker Hendoabadi
MPM.S. Aghareb Parast
M.S. Aghareb Parast
GWG. Winter
G. Winter
KKkhalil khalili
khalil khalili