Traditionally fly ash is thought to be glassy, spherical particle originating from pulverized coal combustion (PCC) at temperature up to 1700 °C. However, nowadays fluidized bed combustion (FBC) technology is spreading quickly around the world as it is an efficient and environmentally friendly method. FBC is also able to utilize mixtures of low-grade solid fuels (e.g., coal, lignite, biomass, and waste) that have fluctuating quality, composition, and moisture contents. However, this leads to a high variation in the produced fly ash quality, unlike PCC fly ash, and hence challenges when attempting to utilize this fly ash. In this study, the utilization of fluidized bed combustion fly ash (FBCFA) was reviewed using the Scopus database. The most promising utilization target for FBCFA from biomass combustion is as a fertilizer and soil amendment. In construction, the FBCFA from various fuels is utilized as cement replacement material, in non-cement binders, as lightweight aggregates and cast-concrete products. Other types of construction applications include mine backfilling material, soil stabilizer, and road construction material. There are also other promising applications for FBCFA utilization, such as catalysts support material and utilization in waste stabilization.
Alkali-activated materials are a low-CO2 alternative for Portland cement in construction. However, one major issue in their use is the poor or varying functionality of the currently available commercial superplasticizers. Especially for one-part (‘just add water’) alkali-activated materials, the number of studies is limited. In this study, one-part alkali-activated mortar was prepared from blast furnace slag by using solid sodium hydroxide as an activator and microsilica as an additional silica source. Comparison of commonly used superplasticizer types revealed that lignosulfonate, melamine, and naphthalene-based superplasticizers are more efficient than the currently most used polyacrylate and polycarboxylate-superplasticizers. Lignosulfonate-based superplasticizer was overall best-performing: it improved significantly the workability (+41% spread, −51% yield stress, −27% viscosity), setting time (+70%), and compressive strength (+19%) at a 0.5 wt% dose. When the amount of water and superplasticizer were optimized, compressive strength of mortar could be doubled (from 19 to 40 MPa at 28 d).
1 January 2018 in Journal of Environmental Management
The increasing use of biomasses in the production of electricity and heat results in an increased amount of burning residue, fly ash which disposal is becoming more and more restricted and expensive. Therefore, there is a great interest in utilizing fly ashes instead of just disposing of it. This study aimed to establish whether the utilization of fly ash from the fluidized bed combustion of peat, wood, and forest residues can be improved by electrostatic precipitator separation of sulfate, chloride, and some detrimental metals. Classification selectivity calculations of electrostatic precipitators for three different fuel mixtures from two different power plants were performed by using Nelson's and Karnis's selectivity indices. Results showed that all fly ashes behaved similarly in the electrostatic separation process SiO2 resulted in coarse fractions with Nelson's selectivity of 0.2 or more, while sulfate, chloride, and the studied detrimental metals (arsenic, cadmium, and lead) enriched into fine fractions with varying selectivity from 0.2 to 0.65. Overall, the results of this study suggest that it is possible to improve the utilization potential of fly ashes from fluidized bed combustion in concrete, fertilizer, and earth construction applications by using electrostatic precipitators for the fractionating of fly ashes in addition to their initial function of collecting fly ash particles from flue gases. The separation of the finer fractions (ESP 2 and 3) from ESP 1 field fly ash is recommended.