Peracids have gained interest in the water treatment over the last few decades. Peracetic acid (CH₃CO₃H) has already become an accepted alternative disinfectant in wastewater disinfection whereas performic acid (CHO₃H) has been studied much less, although it is also already commercially available. Additionally, peracids have been studied for drinking water disinfection, oxidation of aqueous (micro)pollutants, sludge treatment, and ballast water treatment, to name just a few examples. The purpose of this review paper is to represent comprehensive up-to-date information about the water treatment applications, aqueous reaction mechanisms, and disinfection by-product formation of peracids, namely performic, peracetic, and perpropionic acids.

Nano/microplastics (NPs/MPs) and organic micropollutants are contaminants exerting serious threats to aquatic ecosystems, which are further aggravated through their interactions. Organic micropollutants can adsorb on the surface of NPs/MPs, enter to the digestive systems of aquatic organisms with NPs/MPs, and desorb from the surface inside the organism. Consequently, the migration behaviour of organic micropollutants is significantly affected increasing their risk to accumulate in the food chain. Therefore, understanding the adsorption interactions between NPs/MPs and organic micropollutants is critical for evaluating the fate and impact of NPs/MPs in the environment. This review article provides an overview about the role of NPs/MPs as (temporary) sinks for organic micropollutants but also as primary sources of organic micropollutants through the leaching of plastic additives. Specifically, the following aspects are discussed: adsorption/desorption mechanisms (e.g., hydrophobic partitioning interaction, surface adsorption by van der Waals forces or hydrogen bonding, and pore filling), influencing environmental factors (e.g., pH, salinity, and dissolved organic matter), leaching of plastic additives from NPs/MPs, and potential ecotoxicological effects arising from the interactions of NPs/MPs and organic micropollutants.

Alkali-activation (or geopolymer) technology has gained a great deal of interest for its potential applications in water and wastewater treatment during the last decade. Alkali-activated materials can be prepared via a relatively simple and low-energy process, most commonly by treating aluminosilicate precursors with concentrated alkali hydroxide and/or silicate solutions at (near) ambient conditions. The resulting materials are, in general, amorphous, have good physical and chemical stability, ion-exchange properties, and a porous structure. Several of the precursors are industrial by-products or other readily available low-cost materials, which further enhances the environmental and economic feasibility. The application areas of alkali-activated materials in water and wastewater treatment are adsorbents/ion-exchangers, photocatalysts, high-pressure membranes, filter media, anti-microbial materials, pH buffers, carrier media in bioreactors, and solidification/stabilization of water treatment residues. The purpose of this review is to present a comprehensive evaluation of the rapidly growing prospects of alkali-activation technology in water and wastewater treatment.