Shyh-Chin Huang

Dr. Shyh-Chin Huang

orcid

Research Focus & Metrics

Academic Career Length

34Years (1993-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2017 in Energies
Verified
Journal Article
Open access
PDF file
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
KTKuo-Hsin Tseng
Kuo-Hsin Tseng
JLJin-Wei Liang
Jin-Wei Liang
CCChung-Liang Chang
Chung-Liang Chang
Michael Gerard PechtMichael Gerard Pecht
Michael Gerard Pecht
The monitoring and prognosis of cell degradation in lithium-ion (Li-ion) batteries are essential for assuring the reliability and safety of electric and hybrid vehicles. This paper aims to develop a reliable and accurate model for online, simultaneous state-of-charge (SOC) and state-of-health (SOH) estimations of Li-ion batteries. Through the analysis of battery cycle-life test data, the instantaneous discharging voltage (V) and its unit time voltage drop, V′, are proposed as the model parameters for the SOC equation. The SOH equation is found to have a linear relationship with 1/V′ times the modification factor, which is a function of SOC. Four batteries are tested in the laboratory, and the data are regressed for the model coefficients. The results show that the model built upon the data from one single cell is able to estimate the SOC and SOH of the three other cells within a 5% error bound. The derived model is also proven to be robust. A random sampling test to simulate the online real-time SOC and SOH estimation proves that this model is accurate and can be potentially used in an electric vehicle battery management system (BMS).

15 April 2015 in Energies
Verified
Journal Article
Open access
PDF file
KTKuo-Hsin Tseng
Kuo-Hsin Tseng
JLJin-Wei Liang
Jin-Wei Liang
WCWunching Chang
Wunching Chang
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
Accurate estimation of lithium-ion battery life is essential to assure the reliable operation of the energy supply system. This study develops regression models for battery prognostics using statistical methods. The resultant regression models can not only monitor a battery’s degradation trend but also accurately predict its remaining useful life (RUL) at an early stage. Three sets of test data are employed in the training stage for regression models. Another set of data is then applied to the regression models for validation. The fully discharged voltage (Vdis) and internal resistance (R) are adopted as aging parameters in two different mathematical models, with polynomial and exponential functions. A particle swarm optimization (PSO) process is applied to search for optimal coefficients of the regression models. Simulations indicate that the regression models using Vdis and R as aging parameters can build a real state of health profile more accurately than those using cycle number, N. The Monte Carlo method is further employed to make the models adaptive. The subsequent results, however, show that this results in an insignificant improvement of the battery life prediction. A reasonable speculation is that the PSO process already yields the major model coefficients.

26 July 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PSPreetpal Singh
Preetpal Singh
CCChe Chen
Che Chen
Cher Ming TanCher Ming Tan
Cher Ming Tan
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
A fast and accurate capacity estimation method for lithium-ion batteries is developed. This method applies our developed semi-empirical model to a discharge curve of a lithium-ion battery for the determination of its maximum stored charge capacity after each discharge cycle. This model provides an accurate state-of-health (SoH) estimation with a difference of less than 2.22% when compared with the electrochemistry-based electrical (ECBE) SoH calculation. The model parameters derived from a lithium-ion battery can also be applied to other cells in the same pack with less than 2.5% difference from the complex ECBE model, showing the extendibility of the model. The parameters (k1, k2, and k3) calculated in the work can also be used to study the changes in battery internal structure, such as capacity losses at normal conditions, as well as cycling at high temperatures. The time for estimation after each discharge cycle is only 5 s, making it is suitable for on-line in-situ estimation.

10 January 2023 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
CLChun-Ling Lin
Chun-Ling Lin
JLJin-Wei Liang
Jin-Wei Liang
YHYi-Mei Huang
Yi-Mei Huang
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
A novel model-based unbalance monitoring and prognostics for rotor-bearing systems is introduced in the paper. An analytical method is first applied for rotor modeling and the calculated first natural frequency is validated by an FEM model. The rotor-bearing model with the identified bearing parameters is next validated with an operational 3-stage turbine-bearing’s machine on the first critical speed. The novelty of the approach is that the unbalance proceeding with optimization schemes is evaluated in two phases. In phase I, the bearing parameters and the initial unbalances are simultaneously evaluated based on the operational data soon after an overhaul. In phase II, the unbalance deterioration with time is identified through every day’s measured vibration at two bearings. A set of operational data over 16 months, provided by a local company, are used to test the approach. The evaluated unbalance deterioration trend is verified by the collaborated company from two consecutive overhauls. Five optimization algorithms are also tested and the results prove the robustness of the derived approach. Finally, the unbalance forecasting capability extrapolating from historical unbalance curve is demonstrated and that can work as prognostics in a condition-based maintenance strategy.

21 October 2023 in Machines
Verified
Journal Article
Open access
PDF file
BBBanalata Bera
Banalata Bera
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
Mohammad NajibullahMohammad Najibullah
Mohammad Najibullah
CLChun-Ling Lin
Chun-Ling Lin
Rotating machinery is the fundamental component of almost all industrial frameworks. Therefore, prognostics and health management (PHM) have emerged as crucial requirements for effectively managing and sustaining various systems in a timely manner. The unbalanced fault has been recognized as a significant contributing factor in the development of faults in rotor-bearing systems, eventually causing failure. Thus, it is essential to monitor the unbalance and maintain it within acceptable bounds in order to guarantee the system’s proper operation. Most approaches to the rotor’s unbalance monitoring are model-based instead of data-driven due to the shortage of faulted data. In a derived model-based approach, proper identification of the model’s parameters, e.g., bearing parameters, always plays a very crucial role. Nonetheless, the identified model’s parameters in their initial state would inevitably degenerate during a long-term operation because of aging or environmental changes, such that they are no longer well representative of the real system. In this context, this paper offers an adaptive model-based approach for the assessment of unbalance faults developing over days in a rotor-bearing model. The model is adaptive in the sense that it automatically adjusts its parameters so that they are more closely aligned with the real system. A particle swarm optimization (PSO) scheme is utilized in the parameter identification process. The residual serves as the index for initiating the adaptive process when it is greater than a preset percentage. Individual feature errors work as a gauge to determine which bearing parameters need to be reevaluated. A set of 16-month operational data from a local petrochemical company is used to validate the approach. The unbalanced deterioration trend is evaluated, and results from the adaptive methodology are assessed to show its superiority over the original one. It is also observed that the model’s capacity to anticipate unbalance is greatly enhanced by the adaptive strategy. Finally, future unbalances are explored to show its capacity for continuous monitoring-based maintenance solutions.

12 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Shyh-Chin HuangShyh-Chin Huang
Shyh-Chin Huang
Sherina OctavianiSherina Octaviani
Sherina Octaviani
Mohammad NajibullahMohammad Najibullah
Mohammad Najibullah
Ensuring optimal performance and reliability in rotor-bearing systems is crucial for industrial applications. Imbalances and shaft bowing in these systems can lead to decreased efficiency and increased vibrations. The early detection and mitigation of a rotor’s faults are essential, and model-based fault identification has gained much attention in the manufacturing industry over the years. Over the past two decades, however, the development of fault diagnosis rules with data-driven and artificial intelligence (AI) methods has become a trend, and in the foreseeable future the combination of AI with big data will become mainstream. Nevertheless, the critical role of rotating machinery in manufacturing introduces a challenge, as often insufficient fault data are available. This limitation renders the establishment of diagnostic rules using data-driven methods and AI technologies impractical. In light of these challenges, this study proposes a novel hybrid approach that combines a physical model with machine learning (ML) techniques for the diagnosis of multi-faults (imbalances and shaft bowing are demonstrated) in a Jeffcott rotor. To overcome the lack of real-world labeled fault datasets, a physics-based Jeffcott rotor model is first derived and then used to generate abundant fault datasets for ML. Subsequently, simulated data are employed for the training of an artificial neural network (ANN), enabling the network to learn from and analyze the vast array of generated data. The results prove that a well-trained feed-forward neural network (FNN) can accurately isolate and diagnose imbalance and shaft bowing faults using the simulated and real data from the Jeffcott rotor experiment. These physics-based and ML approaches prove effective particularly for multi-faults, offering new possibilities for advanced rotor system monitoring and maintenance strategies in industrial applications.