The monitoring and prognosis of cell degradation in lithium-ion (Li-ion) batteries are essential for assuring the reliability and safety of electric and hybrid vehicles. This paper aims to develop a reliable and accurate model for online, simultaneous state-of-charge (SOC) and state-of-health (SOH) estimations of Li-ion batteries. Through the analysis of battery cycle-life test data, the instantaneous discharging voltage (V) and its unit time voltage drop, V′, are proposed as the model parameters for the SOC equation. The SOH equation is found to have a linear relationship with 1/V′ times the modification factor, which is a function of SOC. Four batteries are tested in the laboratory, and the data are regressed for the model coefficients. The results show that the model built upon the data from one single cell is able to estimate the SOC and SOH of the three other cells within a 5% error bound. The derived model is also proven to be robust. A random sampling test to simulate the online real-time SOC and SOH estimation proves that this model is accurate and can be potentially used in an electric vehicle battery management system (BMS).
Accurate estimation of lithium-ion battery life is essential to assure the reliable operation of the energy supply system. This study develops regression models for battery prognostics using statistical methods. The resultant regression models can not only monitor a battery’s degradation trend but also accurately predict its remaining useful life (RUL) at an early stage. Three sets of test data are employed in the training stage for regression models. Another set of data is then applied to the regression models for validation. The fully discharged voltage (Vdis) and internal resistance (R) are adopted as aging parameters in two different mathematical models, with polynomial and exponential functions. A particle swarm optimization (PSO) process is applied to search for optimal coefficients of the regression models. Simulations indicate that the regression models using Vdis and R as aging parameters can build a real state of health profile more accurately than those using cycle number, N. The Monte Carlo method is further employed to make the models adaptive. The subsequent results, however, show that this results in an insignificant improvement of the battery life prediction. A reasonable speculation is that the PSO process already yields the major model coefficients.
This paper develops intelligent control schemes for a diaphragm-type pneumatic vibration isolation system. The active-control schemes are applied to the pneumatic isolator to enhance isolation performances in the low-frequency range where passive techniques usually have difficulties in remaining effective, especially at the resonance frequency. The functional approximation technique (FAT) is integrated with a sliding-mode control (SMC) design to capture unknown system dynamics and release the requirement of mathematical modeling. To deal with approximation error and system dynamics variation, an adaptive fuzzy sliding-mode controller (AFSMC) is employed as a compensator of the FAT-based SMC. Lyapunov stability theory is used not only to ensure the closed-loop stability, but also to formulate the updating laws for weighting coefficients of expansion basis and fuzzy tuning parameters. To validate the proposed method, a composite control scheme using pressure and velocity measurements as feedback signals is implemented. Experimental explorations indicate that isolation performances obtained using the proposed FAT-based sliding control augmented with AFSMC compensation (FA + AFSMC) are evidently better than those of the traditional proportional integral-derivative control and solely AFSMC scheme.
Bearings are critical components in rotating machinery, where early fault detection is essential to prevent unexpected failures and reduce maintenance costs. This study presents an efficient and interpretable framework for bearing condition monitoring by combining the Wavelet Packet Transform (WPT)-based feature extraction with a Decision Tree (DT) classifier. The WPT technique decomposes vibration signals into multiple frequency bands to extract energy-based features that capture key fault characteristics. Leveraging these features, the DT classifier provides transparent diagnostic rules, enabling a clear understanding of the decision-making process. The proposed method offers a superior balance between diagnostic accuracy, computational efficiency, and explainability compared to conventional black-box models. It is well suited for real-time and resource-constrained industrial applications. Furthermore, feature importance analysis reveals the most influential frequency components associated with different fault types, offering valuable insights for predictive maintenance strategies. The proposed WPT-DT framework represents a practical and scalable solution for intelligent fault diagnosis in the context of Industry 4.0 and smart maintenance systems.
1 November 2018 in International Journal of Mechanical Sciences