Jin Li-Li

Ms. Jin Li-Li


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
JLJin Li-Li
Jin Li-Li
ZZZengBin ZengBin
ZengBin ZengBin
LDLu Damin
Lu Damin
YGYingjun Gao
Yingjun Gao
KZKe-Shi Zhang
Ke-Shi Zhang
The relationship between strain fatigue life and evolution of meso-deformation inhomogeneity was studied, through the cyclic process of numerical simulation of crystal plasticity compared with the fatigue test of steel hot-rolled ribbed-steel bar 400 (HRB400). The statistical characterization parameters at grain level, including the standard deviation of the dot product of longitudinal stress and strain, the product of the macro stress and the standard deviation of the longitudinal strain, and the product of the macro stress ratio and the standard deviation of the longitudinal strain, were proposed and respectively applied to measure the meso-deformation inhomogeneity of materials. These parameters take the effect of peak stress into account, distinct from the pure strain statistical parameters. The numerical results demonstrate that the low-cycle fatigue life curves of materials are predictable using the new parameters as FIPs (fatigue indicator parameters), and the predictions are more rational than by utilizing the FIPs without considering the peak stress effect.

1 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JLJin Li-Li
Jin Li-Li
YLYoufang Liao
Youfang Liao
Due to natural sedimentation and artificial filling, slopes exhibit heterogeneity in the form of multi-layer soils, namely, layered slopes. Compared with homogenous slopes, the failure mechanism of layered slopes is more complex owing to the different shear strengths of each soil layer. Therefore, it is of great importance to gain insight into the stability of layered slopes. In this study, the upper bound theorem of limit analysis incorporated with a pseudo-static approach is utilized to investigate the seismic stability of two kinds of two-layered slopes: one with a stiff lower soil layer and the other with a weak lower soil layer. Three failure patterns, namely face failure, toe failure and base failure, are taken into account. A depth coefficient (Δ) is introduced to describe the distribution of two soil layers. The layer-wise summation method is adopted to calculate the safety factor and yield acceleration coefficient more conveniently. Based on Newmark’s method, the earthquake-induced horizontal displacement is estimated. The calculated results are validated by comparisons with published literature and the numerical method in terms of safety factor, critical failure surface and yield acceleration coefficient. The results show that the depth coefficient has a significant influence on the failure mechanism of two-layered slopes by determining whether the stability of upper-layered soil is dominant in the overall slope stability or not. Inaccurately identifying the failure patterns will overestimate the seismic performance of two-layered slopes in the aspects of safety factor and yield acceleration coefficient, leading to an underestimation of earthquake-induced horizontal displacement.

16 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
GYGuilin Yang
Guilin Yang
DLDamin Lu
Damin Lu
JLJin Li-Li
Jin Li-Li
YZYiqing Zou
Yiqing Zou
Investigating the effects of corrosion on the mechanical and fatigue properties of steel wires is critical for the safety assessment of bridge cable structures.This study focuses on high-strength galvanized steel wires used for bridge cables, with a diameter of 7 mm and a strength grade of 1770 MPa. Specimens with varying mass loss rates η were prepared by electrochemical corrosion method, and systematic tensile and fatigue tests were conducted to study the effects of corrosion on the fundamental mechanical properties and fatigue life of the steel wires. The results indicate that the elastic modulus of the steel wires decreases slightly with the increase of η but still meets the requirements of relevant standards. In contrast, the yield strength and tensile strength degrade significantly, while ductility is particularly susceptible to corrosion, showing more severe deterioration. When η is less than 2.75%, the corroded steel wires still maintain favorable fatigue resistance at a nominal stress amplitude of 360 MPa. Once η exceeds this threshold, their fatigue life decreases significantly in a nonlinear manner with increasing η. The fatigue life predicted by a finite element model (FEM) reconstructed based on the 3D scanning geometry of corroded steel wires and combined with the Abaqus/fe-safe module shows good agreement with the experimental results, indicating that this approach can provide a valuable reference for the durability assessment of bridge cables.

30 September 2018 in Revue des composites et des matériaux avancés
Verified
Journal Article
Closed access
JLJin Li-Li
Jin Li-Li
Analyse sur les dommages microscopiques de matériaux poreux sous des charges cycliques Analysis on microscopic damage of porous materials under cyclic loads

24 October 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JLJin Li-Li
Jin Li-Li
This study presents a seismic stability assessment framework for heterogeneous compound slopes with cracks, for example, highway embankment slopes. Based on limit analysis method, a kinematical approach incorporating a discretization technique is adopted to account for both global and local instabilities of cracked compound slopes under seismic excitations. The pseudo-static approach is applied to describe seismic forces. The soil heterogeneity is considered as linear variation along the depth. An implicit formula for stability factor (or safety factor) is derived through the work rate balance equation. The upper-bound solutions are calculated by combining a bisectional method with an optimization algorithm. The results are thoroughly verified through comparison with existing studies and finite element analysis. The results show that slope geometry plays a dominant role in governing slope stability and failure behavior. In particular, increasing the upper slope inclination significantly reduces the slope stability and induces a transition from local to global failure, especially under a larger depth coefficient. The presence of cracks further weakens slope stability, with their depth and location highly sensitive to geometric configuration. Furthermore, seismic excitation deepens cracks and shifts them upslope, inducing a transition from local to global failure as horizontal acceleration coefficient increases. Soil heterogeneity influences failure mechanisms that stronger upper soil deepens cracks via shear transition and shifts failure surfaces forward, exhibiting a “seesaw effect”. The findings provide the guidance for the design of stable and crack-resistance slope engineering, particularly in topographically complex or geohazard-prone regions.