Background: Titanium implant surfaces are continuously modified to improve biocompatibility and to promote osteointegration. Graphene oxide (GO) has been successfully used to ameliorate biomaterial performances, in terms of implant integration with host tissue. The aim of this study is to evaluate the Dental Pulp Stem Cells (DPSCs) viability, cytotoxic response, and osteogenic differentiation capability in the presence of GO-coated titanium surfaces. Methods: Two titanium discs types, machined (control, Crtl) and sandblasted and acid-etched (test, Test) discs, were covalently functionalized with GO. The ability of the GO-functionalized substrates to allow the proliferation and differentiation of DPSCs, as well as their cytotoxic potential, were assessed. Results: The functionalization procedures provide a homogeneous coating with GO of the titanium surface in both control and test substrates, with unchanged surface roughness with respect to the untreated surfaces. All samples show the deposition of extracellular matrix, more pronounced in the test and GO-functionalized test discs. GO-functionalized test samples evidenced a significant viability, with no cytotoxic response and a remarkable early stage proliferation of DPSCs cells, followed by their successful differentiation into osteoblasts. Conclusions: The described protocol of GO-functionalization provides a novel not cytotoxic biomaterial that is able to stimulate cell viability and that better and more quickly induces osteogenic differentiation with respect to simple titanium discs. Our findings pave the way to exploit this GO-functionalization protocol for the production of novel dental implant materials that display improved integration with the host tissue.

Liposomes loaded with drug–cyclodextrin complexes are widely used as drug delivery systems, especially for species with low aqueous solubility and stability. Investigation of the intimate interactions of macrocycles with liposomes are essential for formulation of efficient and stable drug-in-cyclodextrin-in-liposome carriers. In this work, we reported the preparation of unilamellar vesicles of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) embedded with native β-cyclodextrin and two synthetic derivatives: heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TMCD) and heptakis(2,3-di-O-acetyl)-β-cyclodextrin (DACD). We then studied the effect of these macrocycles on the liposomal size, membrane viscosity, and liposomal stability at different temperatures and concentrations. We observed that TMCD and DACD affected vesicle size and the change of size was related to CD concentration. Irrespective of its nature, the macrocycle established interactions with the phospholipidic head groups, preventing cyclodextrins to diffuse into the lipid bilayer, as confirmed by molecular dynamics simulations. Such supramolecular structuring improves liposome stability making these colloid systems promising carriers for biologically active compounds.

Exposure to high altitude might cause the body to adapt with negative energy and fluid balance that compromise body composition and physical performance. In this field study involving 12 healthy adults, sex-balanced, and aged 29 ± 4 years with a body mass index of 21.6 ± 1.8 kg/m², we investigated the effects of a 4-day trekking up to 4556 m a.s.l. on Monte Rosa (Alps, Italy). The food intake was recorded using food diaries and nutrient averages were calculated. The bio-impedance analysis was performed at low and high altitudes, and a wearable biosensor (Swemax) was used to track hydro-saline losses in two participants. Daily total energy intake was 3348 ± 386 kcal for males and 2804 ± 415 kcal for females (13%–14% protein, 35% fat, 44%–46% carbohydrates). Although there was a significant body weight loss (65.0 ± 9.3 vs. 64.2 ± 9.10 kg, p < 0.001, d = 1.398), no significant changes in body composition parameter were found but a trend in the increase of the bioelectrical phase angle in males ( p = 0.059, d = −0.991). Body water percentage significantly changed ( p = 0.026, η² _p = 0.440), but the absolute water did not, suggesting that the weight loss was not due to water loss. Salivary and urinary osmolality did not change. A reduction in sweat rate at higher altitudes was observed in both participants. Interestingly, salivary leptin increased ( p = 0.014, η² _p = 0.510), and salivary ghrelin decreased ( p = 0.036, η² _p = 0.403). Therefore, the 4-day trekking at altitude of hypoxia exposure induced changes in satiety and appetite hormones. High altitude expeditions require more specific nutritional guidance, and using multiplex analysis could help in monitoring fluid balance and body composition.

The development of novel three-dimensional (3D) nanomaterials combining high biocompatibility, precise mechanical characteristics, electrical conductivity, and controlled pore size to enable cell and nutrient permeation is highly sought after for cardiac tissue engineering applications including repair of damaged heart tissues following myocardial infarction and heart failure. Such unique characteristics can collectively be found in hybrid, highly porous tridimensional scaffolds based on chemically functionalized graphene oxide (GO). By exploiting the rich reactivity of the GO's basal epoxydic and edge carboxylate moieties when interacting, respectively, with NH₂ and NH₃⁺ groups of linear polyethylenimines (PEIs), 3D architectures with variable thickness and porosity can be manufactured, making use of the layer-by-layer technique through the subsequent dipping in GO and PEI aqueous solutions, thereby attaining enhanced compositional and structural control. The elasticity modulus of the hybrid material is found to depend on scaffold's thickness, with the lowest value of 13 GPa obtained in samples containing the highest number of alternating layers. Thanks to the amino-rich composition of the hybrid and the established biocompatibility of GO, the scaffolds do not exhibit cytotoxicity; they promote cardiac muscle HL-1 cell adhesion and growth without interfering with the cell morphology and increasing cardiac markers such as Connexin-43 and Nkx 2.5. Our novel strategy for scaffold preparation thus overcomes the drawbacks associated with the limited processability of pristine graphene and low GO conductivity, and it enables the production of biocompatible 3D GO scaffolds covalently functionalized with amino-based spacers, which is advantageous for cardiac tissue engineering applications. In particular, they displayed a significant increase in the number of gap junctions compared to HL-1 cultured on CTRL substrates, which render them key components for repairing damaged heart tissues as well as being used for 3D in vitro cardiac modeling investigations.

The application of biomaterials on immune regenerative strategies to deal with unsolved pathologies is getting attention in the field of tissue engineering. In this context, graphene oxide (GO) has been proposed as an immune-mimetic material largely used for developing stem cell-based regenerative therapies, since it has shown to influence stem cell behavior and modulate their immune response. Similarly, amniotic epithelial stem cells (AECs) are getting an increasing clinical interest as source of stem cells due to their great plasticity and immunomodulatory paracrine activities, even though GO bio-mimetic effects still remain unknown. To this aim, GO-functionalized glass coverslips have been used for AECs culture. The results demonstrated how GO-coating is able to induce and accelerate the Epithelial-Mesenchymal Transition (EMT), in a process mediated by the intracellular activation of TGFβ1-SMAD2/3 signaling pathway. The trans-differentiation towards mesenchymal phenotype provides AECs of migratory ability and substantially changes the pattern of cytokines secretion upon inflammatory stimulus. Indeed, GO-exposed AECs enhance their pro-inflammatory interleukins production thus inducing a more efficient activation of macrophages and, at the same time, by slightly reducing their inhibitory action on peripheral blood mononuclear cells proliferation. Therefore, the adhesion of AECs on GO-functionalized surfaces might contribute to the generation of a tailored microenvironment useful to face both the phases of the inflammation, thereby fostering the regenerative process.