Keun Ha Choi

Dr. Keun Ha Choi


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
Minseong ChoiMinseong Choi
Minseong Choi
SYSeunghoon Yang
Seunghoon Yang
SHSeungho Han
Seungho Han
YLYeongseok Lee
Yeongseok Lee
MLMinyoung Lee
Minyoung Lee
KKKyung-Soo Kim
Kyung-Soo Kim
Recently, several 4D radar datasets have been published due to its high resolution and robustness in extreme weather conditions. However, most of the recent 4D radar dataset publications have insufficient odometry sensors, which is disadvantageous for 4D radar odometry research. To tackle this problem, this letter presents a 4D radar dataset with various odometry sensors based on a robot operating system (ROS) framework called MSC-RAD4R , which stands for Motivated for SLAM in City, ROS-based Automotive Dataset with 4D Radar . Our dataset at a glance includes 98,786 pairs of stereo images, 60,562 frames of LiDAR data, 90,864 frames of 4D radar data, 60,570 frames of RTK-GPS, 60,559 frames of GPS, 1,211,486 frames of IMU data and 6,057,276 wheel data covering approximately 51.6 km and 100 minutes of automotive data in various environments including day, night, snow and smoke. In particular, our setup includes a high-resolution 79 GHz Adaptive PDM FMCW Oculii 4D radar, which provides approximately 5,000–20,000 points per frame and operates at a long range of 400 meters with a frequency of 15 Hz. It is expected that the proposed dataset will be useful for researchers working on 4D radar SLAM.

19 April 2024 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
SHSeungho Han
Seungho Han
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
In this paper, we propose an adaptive safety distance that is adjusted along the uncertain braking duration of the object vehicle resulting in an improvement of driving comfort. In the real world, the object vehicle decelerates for uncertain duration, while the conventional strategies assume that the object vehicle decelerates until full stop. By imposing a constraint on the ego vehicle to stop simultaneously with the object vehicle, the driving comfort is enhanced by activating full braking (FB) only when it is necessary. To accomplish these, two concepts are proposed; effective collision avoidance (ECA) condition and full braking activation parameter (FBAP). ECA refers to a strategy in which the ego vehicle stops simultaneously with the object vehicle to account for its uncertain deceleration duration. FBAP is suggested to determine when to activate FB by adjusting the duration of partial braking (PB). Virtual experiments are conducted strictly with various scenarios to validate the performance of the proposed FBAP-based safety distance. The test results demonstrate that the suggested FBAP-based safety distance is applicable to a wide range of driving speeds, improving driving comfort and performing collision avoidance compared to conventional methods.

30 September 2024 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
YLYeongseok Lee
Yeongseok Lee
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
This letter presents a GPU-enabled parallel trajectory optimization framework for model predictive control (MPC) in complex urban environments. It fuses the advantages of sampling-based MPC, which can cope with nonconvex costmaps through random sampling of trajectories, with the advantages of gradient-based MPC, which can generate smooth trajectories. In addition, we leverage a generalized safety-embedded MPC problem definition with a discrete barrier state (DBaS). The proposed framework has three steps: 1) a costmap builder to generate the barrier function map, 2) a seed trajectory generator to choose randomly generated trajectories to send to the optimizers, and 3) a batch trajectory optimizer to optimize each of the seed trajectories and select the best trajectory. Experiments with real-time simulations compare the effectiveness of the proposed framework, sampling-based MPC, and gradient-based MPC, which optimizes a single trajectory. The experiments also compare the application of two different control sequence sampling schemes to the proposed framework. The results show that the proposed framework performs gradient-based optimization but can plan a better trajectory even in complex environments by providing various initial guesses. We also show that the proposed framework can perform more accurate control actions than sampling-based MPC.

21 December 2023 in IEEE Access
Verified
Journal Article
Open access
SYSeunghoon Yang
Seunghoon Yang
Minseong ChoiMinseong Choi
Minseong Choi
SHSeungho Han
Seungho Han
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
The integration of cameras and millimeter-wave radar into sensor fusion algorithms is essential to ensure robustness and cost effectiveness for vehicle pose estimation. Due to the low resolution of traditional radar, several studies have investigated 4D imaging radar, which provides range, Doppler, azimuth, and elevation information with high resolution. This paper presents a method for robustly estimating vehicle pose through 4D radar and camera fusion, utilizing the complementary characteristics of each sensor. Leveraging the single-view geometry of the detected vehicle bounding box, the lateral position is derived based on the camera images, and the yaw rate is calculated through feature matching between consecutive images. The high-resolution 4D radar data are used to estimate the heading angle and forward velocity of the target vehicle by leveraging the position and Doppler velocity information. Finally, an extended Kalman filter (EKF) is employed to fuse the physical quantities obtained by each sensor, resulting in more robust pose estimation results. To validate the performance of the proposed method, experiments were conducted in foggy environments, including straight and curved driving scenarios. The experimental results indicate that the performance of the camera-based method is reduced due to frame loss in visually challenging scenarios such as foggy environments, whereas the proposed method exhibits superior performance and enhanced robustness.

1 April 2024 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
This paper presents a novel six-axis force/torque (F/T) sensor design for robotics, combining ease of manufacturing with compactness. It features a high measuring range of ∼3700 N, an exceptional resolution of 0.1 N, and a rapid 5 kHz sampling rate. The sensor’s design, focusing on durability and a wider sensing range, utilizes noncontact sensors and a streamlined structure. A novel force sensing scheme aligns sensing elements in-plane on a single printed circuit board, reducing the part count to four and the weight to under 80 g, while integrating an analog-to-digital converter to eliminate the need for external communication devices. The lightweight, efficient prototype demonstrates a superior performance and a high response frequency, validated against a reference F/T sensor.

2 June 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
SLSeokju Lee
Seokju Lee
BHByeong-Il Ham
Byeong-Il Ham
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
This study aims to enhance the accuracy of a six-axis force/torque (F/T) sensor by improving upon existing approaches that utilize a multilayer perceptron (MLP) and the least-squares method. While previous research has employed MLPs for thermal compensation, it has not effectively addressed temperatureinduced drift. The sensor used in this study operates based on infrared light and incorporates a photocoupler, which makes it highly sensitive to dark current effects, resulting in significant drift under temperature variations. Moreover, its compact and lightweight design (45 g) leads to low thermal capacity, making it susceptible to rapid temperature fluctuations even with minimal heat input, which in turn affects real-time performance. To address these challenges, this study proposes a gated recurrent unit (GRU)-based method and compares it with the conventional MLP approach. Experimental results demonstrate that the GRU-based model significantly reduces drift from 26 N to 2.7 N, and the root mean square error (RMSE) from 500 to 3-representing a 100-fold improvement. These findings suggest that GRU-based modeling substantially improves real-time F/T measurements in temperature-sensitive environments, benefiting applications in robotics and precision instrumentation.