Hyun-Bin Kim

Dr. Hyun-Bin Kim

orcid
Department of Mechanical Engineering KAIST 34141 Daejeon Kor...

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Open access
JKJeonguk Kang
Jeonguk Kang
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
KKKyung-Soo Kim
Kyung-Soo Kim
Information about the external wrench in legged robots is crucial for performing interactive tasks. However, most previous research has relied on attaching force/torque sensors to the end-effectors, which has disadvantages in terms of cost and maintenance. Therefore, this article presents a sensorless method for estimating the external wrench on a legged robot. It involves two main steps. First, a nonlinear disturbance observer is used to obtain a noise-reduced ground reaction force estimate. Then, to obtain the applied external wrench value, a factor graph optimization method is implemented to couple the IMU, camera and estimated leg force data tightly. Unlike the conventional method, the high performance of the optimization approach and the fusion with the exteroceptive sensor improved the estimation accuracy. The effectiveness of the proposed method was verified through several experiments.

23 October 2024 in IEEE Access
Verified
Journal Article
Open access
JKJeonguk Kang
Jeonguk Kang
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
BHByeong-Il Ham
Byeong-Il Ham
KKKyung-Soo Kim
Kyung-Soo Kim
This article studies a robust controller capable of responding to external forces applied to a quadruped robot. Unlike conventional methods, our controller utilizes information about external forces to achieve better performance. We incorporate disturbance feedback into the robot dynamics and calculate a balancing index that considers the estimated force information to ensure coverage of the robot’s support polygon. This approach allows the robot to adjust its legs in response to external forces, redistribute ground reaction forces, and enhance stability, enabling it to handle greater pressures. Additionally, our increases the traction force generation while maintaining posture. These capabilities are expected to maximize disturbance resilience, enhance task performance, and improve stability during interactions with external environments, ultimately contributing to better robotic locomotion in real-world scenarios.

1 April 2024 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
This paper presents a novel six-axis force/torque (F/T) sensor design for robotics, combining ease of manufacturing with compactness. It features a high measuring range of ∼3700 N, an exceptional resolution of 0.1 N, and a rapid 5 kHz sampling rate. The sensor’s design, focusing on durability and a wider sensing range, utilizes noncontact sensors and a streamlined structure. A novel force sensing scheme aligns sensing elements in-plane on a single printed circuit board, reducing the part count to four and the weight to under 80 g, while integrating an analog-to-digital converter to eliminate the need for external communication devices. The lightweight, efficient prototype demonstrates a superior performance and a high response frequency, validated against a reference F/T sensor.

2 June 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
SLSeokju Lee
Seokju Lee
BHByeong-Il Ham
Byeong-Il Ham
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
This study aims to enhance the accuracy of a six-axis force/torque (F/T) sensor by improving upon existing approaches that utilize a multilayer perceptron (MLP) and the least-squares method. While previous research has employed MLPs for thermal compensation, it has not effectively addressed temperatureinduced drift. The sensor used in this study operates based on infrared light and incorporates a photocoupler, which makes it highly sensitive to dark current effects, resulting in significant drift under temperature variations. Moreover, its compact and lightweight design (45 g) leads to low thermal capacity, making it susceptible to rapid temperature fluctuations even with minimal heat input, which in turn affects real-time performance. To address these challenges, this study proposes a gated recurrent unit (GRU)-based method and compares it with the conventional MLP approach. Experimental results demonstrate that the GRU-based model significantly reduces drift from 26 N to 2.7 N, and the root mean square error (RMSE) from 500 to 3-representing a 100-fold improvement. These findings suggest that GRU-based modeling substantially improves real-time F/T measurements in temperature-sensitive environments, benefiting applications in robotics and precision instrumentation.

29 May 2023
Verified
Conference Paper
Closed access
JKJeonguk Kang
Jeonguk Kang
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
KCKeun Ha Choi
Keun Ha Choi
KKKyung-Soo Kim
Kyung-Soo Kim
Recently, legged robots have been used for various purposes, such as exploring unknown terrain or interacting with the world. For control and planning legged systems during interactive operations, it is essential to estimate and respond to external forces. However, in legged system, it becomes difficult to estimate forces due to highly dynamic situations. There are several studies that use a force sensor on the foot and end effector, but these approaches have disadvantages in terms of cost and sustainability. Therefore, in this paper, we propose an improved method for estimating external forces without a force sensor. First, each leg force was obtained using the system dynamics of the robot with a disturbance observer. Then, by preintegration, it was tightly coupled with other sensors to estimate the pose and external force simultaneously. Despite the impact and slip, we estimate external forces accurately in standing and walking motions. Moreover, we compared pose estimation performance with VINS-Mono [1], and there is no significant accuracy degradation in spite of highly dynamic force residual.

19 October 2025
Verified
Conference Paper
Closed access
SLSeokju Lee
Seokju Lee
Hyun-Bin KimHyun-Bin Kim
Hyun-Bin Kim
KKKyung-Soo Kim
Kyung-Soo Kim
This paper presents an algorithm to improve state estimation for legged robots. Among existing model-based state estimation methods for legged robots, the contact-aided invariant extended Kalman filter defines the state on a Lie group to preserve invariance, thereby significantly accelerating convergence. It achieves more accurate state estimation by leveraging contact information as measurements for the update step. However, when the model exhibits strong nonlinearity, the estimation accuracy decreases. Such nonlinearities can cause initial errors to accumulate and lead to large drifts over time. To address this issue, we propose compensating for errors by augmenting the Kalman filter with an artificial neural network serving as a nonlinear function approximator. Furthermore, we design this neural network to respect the Lie group structure to ensure invariance, resulting in our proposed Invariant Neural-Augmented Kalman Filter (InNKF). The proposed algorithm offers improved state estimation performance by combining the strengths of model-based and learning-based approaches. Project webpage: https://seokju-lee.github.io/innkf_webpage