Gravel is one of the main factors affecting the mechanical properties of conglomerates, which plays a decisive role in crack propagation. In this paper, taking the conglomerate of the Baikouquan Formation in Mahu Sag of Xinjiang as the research object, a three-dimensional model of the conglomerate is constructed by the discrete element numerical simulation method, and the triaxial compression experiment under different confining pressures is simulated. The mechanical properties and fracture morphology of conglomerate are analyzed with gravel content as a variable and verified by laboratory tests. In this simulation, with the increase of gravel content, the compressive strength of the conglomerate decreases, angle of internal friction decreases, and the fractures show different forms. The results show that the gravel morphology, spatial location, and gravel content have an impact on the mechanical properties of the conglomerate. The gravel content affects the formation process of the dominant fracture surface by controlling the distance between gravels so as to control the internal friction angle and it is the main controlling factor for the mechanical properties of the conglomerate. Gravel cracks initiate at the edge of gravel. Stress controls the formation of main cracks under low gravel content, and the influence of gravels under high gravel content makes cracks more discrete and complex.
Compared with conventional gas reservoirs, deep shale gas reservoirs are characterized by developed faults and fractures, strong heterogeneity, high stress sensitivity, and complex in situ stress distribution. To address traditional 3D static models’ inability to predict in situ stress changes in strongly heterogeneous reservoirs during fracturing, this study takes the deep shale gas in the Zigong block of the Sichuan Basin as an example. By comprehensively considering the heterogeneity and anisotropy of geomechanical parameters and natural fractures in shale gas reservoirs, a 4D in situ stress multi-physics coupling model for shale gas reservoirs based on geology–engineering integration is established. Through coupling geomechanical parameters with fracturing operation data, the dynamic evolution laws of multi-scale stress fields from single-stage to platform-scale during large-scale fracturing of horizontal wells in deep shale gas reservoirs are systematically studied. The research results show the following: (1) The fracturing process has a significant impact on the magnitude and direction of the stress field. With the injection of fracturing fluid, both the minimum and maximum horizontal principal stresses increase, with the minimum horizontal principal stress rising by 1.8–6.4 MPa and the maximum horizontal principal stress by 1.1–3.2 MPa; near the wellbore, there is an obvious deflection in the direction of in situ stress. (2) As the number of fracturing stages increases, the minimum horizontal principal stress shows an obvious cumulative growth trend, with a more significant increase in the later stages, and there is a phenomenon of stress accumulation along the wellbore, with the stress difference decreasing from 15 MPa to 11 MPa. (3) The on-site adoption of the fracturing operation method featuring overall flush advancement and inter-well staggered fracture placement has achieved good stress balance; comparative analysis shows that the stress communication degree of the 400 m well spacing is weaker than that of the 300 m well spacing. This study provides a more reasonable simulation method for large-scale fracturing development of deep shale gas, which can more accurately predict and evaluate the dynamic stress field changes during fracturing, thereby guiding fracturing operations in actual production.