Yinghao Shen

Dr. Yinghao Shen


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
MMMianmo Meng
Mianmo Meng
HGHongkui Ge
Hongkui Ge
YSYinghao Shen
Yinghao Shen
LWLeilei Wang
Leilei Wang

12 December 2016 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
YSYinghao Shen
Yinghao Shen
GLGuohua Luan
Guohua Luan
HZHaiyong Zhang
Haiyong Zhang
QLQian Liu
Qian Liu
JZJunjing Zhang
Junjing Zhang
HGHongkui Ge
Hongkui Ge
Determining the influence of effective stress on rock deformation is essential for geotechnical stability analysis in oil and gas production. There is no universal effective stress coefficient for all rock properties, and different values of effective stress coefficient apply for different physical quantities (Gurevich, 2004). Although the effective stress law and its application is not new, frequently overlooked or misapplied. Hence, a novel method was proposed for measuring and calculating the effective stress coefficient in this work. Firstly, pore compressibility under different confine pressure values was measured using reservoir fluid or experimental fluid. Secondly, effective stress was calculated by comparing pore compressibility under different confine pressure and then, the range of effective stress coefficients was determined eventually. Finally, the reliability of the proposed method was validated via the stress-sensitive curves of tight sandstone core samples and by comparing the results with those of two other calculation methods for the effective stress coefficient. This work suggests that the stress-sensitive curves of the two core samples from the same location and with similar physical properties have given similar effective stress coefficient (η = 0.201) calculated using the proposed method, which indicates that the calculation is reasonable. The comparison of the proposed method with other methods also indicate that the proposed technique is reliable.

12 October 2020 in Energies
Verified
Journal Article
Open access
PDF file
MMMianmo Meng
Mianmo Meng
YSYinghao Shen
Yinghao Shen
HGHongkui Ge
Hongkui Ge
XXXiaosong Xu
Xiaosong Xu
YWYang Wu
Yang Wu
Hydraulic fracturing becomes an essential method to develop tight gas. Under high injection pressure, fracturing fluid entering into the formation will reduce the flow channel. To investigate the influence of water saturation on gas flow behavior, this study conducted the gas relative permeability with water saturation and the flow rate with the pressure gradient at different water saturations. As the two dominant tight gas-bearing intervals, the Upper Paleozoic Taiyuan and Shihezi Formations deposited in Ordos Basin were selected because they are the target layers for holding vast tight gas. Median pore radius in the Taiyuan Formation is higher than the one in the Shihezi Formation, while the most probable seepage pore radius in the Taiyuan Formation is lower than the one in the Shihezi Formation. The average irreducible water saturation is 54.4% in the Taiyuan Formation and 61.6% in the Shihezi Formation, which indicates that the Taiyuan Formation has more movable water. The average critical gas saturation is 80.4% and 69.9% in these two formations, respectively, which indicates that the Shihezi Formation has more movable gas. Both critical gas saturation and irreducible water saturation have a negative relationship with porosity as well as permeability. At the same water saturation, the threshold gradient pressure of the Taiyuan Formation is higher than the one in the Shihezi Formation, which means that water saturation has a great influence on the Taiyuan Formation. Overall, compared with the Shihezi Formation, the Taiyuan Formation has a higher median pore size and movable water saturation, but water saturation has more influence on its gas flow capacity. Our research is conducive to understanding the effect of fracturing fluid filtration on the production of natural gas from tight reservoirs.

25 August 2025 in Processes
Verified
Journal Article
Open access
PDF file
YWyongchao wu Wu
yongchao wu Wu
ZZZhaopeng Zhu
Zhaopeng Zhu
YSYinghao Shen
Yinghao Shen
XYXuemeng Yu
Xuemeng Yu
GLGuangyu Liu
Guangyu Liu
PLPengyu Liu
Pengyu Liu
Compared with conventional gas reservoirs, deep shale gas reservoirs are characterized by developed faults and fractures, strong heterogeneity, high stress sensitivity, and complex in situ stress distribution. To address traditional 3D static models’ inability to predict in situ stress changes in strongly heterogeneous reservoirs during fracturing, this study takes the deep shale gas in the Zigong block of the Sichuan Basin as an example. By comprehensively considering the heterogeneity and anisotropy of geomechanical parameters and natural fractures in shale gas reservoirs, a 4D in situ stress multi-physics coupling model for shale gas reservoirs based on geology–engineering integration is established. Through coupling geomechanical parameters with fracturing operation data, the dynamic evolution laws of multi-scale stress fields from single-stage to platform-scale during large-scale fracturing of horizontal wells in deep shale gas reservoirs are systematically studied. The research results show the following: (1) The fracturing process has a significant impact on the magnitude and direction of the stress field. With the injection of fracturing fluid, both the minimum and maximum horizontal principal stresses increase, with the minimum horizontal principal stress rising by 1.8–6.4 MPa and the maximum horizontal principal stress by 1.1–3.2 MPa; near the wellbore, there is an obvious deflection in the direction of in situ stress. (2) As the number of fracturing stages increases, the minimum horizontal principal stress shows an obvious cumulative growth trend, with a more significant increase in the later stages, and there is a phenomenon of stress accumulation along the wellbore, with the stress difference decreasing from 15 MPa to 11 MPa. (3) The on-site adoption of the fracturing operation method featuring overall flush advancement and inter-well staggered fracture placement has achieved good stress balance; comparative analysis shows that the stress communication degree of the 400 m well spacing is weaker than that of the 300 m well spacing. This study provides a more reasonable simulation method for large-scale fracturing development of deep shale gas, which can more accurately predict and evaluate the dynamic stress field changes during fracturing, thereby guiding fracturing operations in actual production.

Verified
Journal Article
Open access
PDF file
YSYinghao Shen
Yinghao Shen
BLBing Liu
Bing Liu
HJHongfeng Jiang
Hongfeng Jiang
HMHong Mao
Hong Mao
MLMingrui Li
Mingrui Li
ZYzhi cheng Yang
zhi cheng Yang
The Weixinan Sag in the Beibuwan Basin is rich in shale oil resources. However, the reservoirs exhibit rapid phase changes, strong compartmentalization, thin individual layers, and high-frequency vertical variations in the thin interbedded sandstone and mudstone. These factors can restrict the height of hydraulic fracture propagation. Additionally, the low-porosity and low-permeability shale oil reservoirs face challenges such as low production rates and rapid decline. To address these issues, the Plannar3D full 3D fracturing model was used to simulate hydraulic fracture propagation and to study the main controlling factors for fracture propagation in the second member of the Liushagang Formation. Based on the concept of geological–engineering integration, a sweet spot evaluation was conducted to identify reservoirs with relatively better brittleness, reservoir properties, and oil content as the fracturing targets for horizontal wells. The UFM model was then applied to optimize fracturing parameters. This study indicates that the matrix-type oil shale has a high clay mineral content, resulting in a low Young’s modulus and poor brittleness. This makes hydraulic fracture propagation difficult and leads to less effective reservoir stimulation. In contrast, hydraulic fractures propagate more easily in high-brittleness interlayer-type oil shale. Therefore, it is recommended to prioritize the extraction of shale oil from interlayer-type oil shale reservoirs. The difference in interlayer stress is identified as the primary controlling factor for cross-layer fracture propagation in the study area. Based on the concept of geological–engineering integration, a sweet spot evaluation standard was established for the second member of the Liushagang Formation, considering both reservoir quality and engineering quality. Four sweet spot zones of interlayer-type oil shale reservoirs were identified according to this evaluation standard. To achieve uniform fracture initiation, a differentiated segment and cluster design was implemented for certain high-angle sections of well WZ11-6-5d. Interlayer-type oil shale was selected as the fracturing target, and the UFM was used for hydraulic fracture propagation simulation. Fracturing parameters were optimized with a focus on hydraulic fracture characteristics and the estimated ultimate recovery (EUR). The optimization results were as follows: a single-stage length of 50 m, cluster spacing of 15 m, pump injection rate of 10 m3/min, fluid intensity of 25 m3/m, and proppant intensity of 3.5 t/m. The application of these optimized fracturing parameters in field operations resulted in successful fracturing and the achievement of industrial oil flow.

20 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
HMHong Mao
Hong Mao
YSYinghao Shen
Yinghao Shen
YYYao Yuan
Yao Yuan
KWKunyu Wu
Kunyu Wu
LXLin Xie
Lin Xie
YWYouyu Wan
Youyu Wan
Yingxiongling shale oil is considered a critical area for future crude oil production in the Qaidam Basin. However, the unique features of the Yingxiongling area, such as extraordinary thickness, hybrid sedimentary, and extensive reformation, are faced with several challenges, including an unclear understanding of the main controlling factors for hydraulic fracturing propagation, difficulties in selecting engineering sweet layers, and difficulties in optimizing the corresponding fracturing schemes, which restrict the effective development of production. This study focuses on mixed fine-grained sedimentary rocks, employing a high-resolution integrated three-dimensional geological-geomechanical model to simulate fracture propagation. By combining laboratory core experiments, a holistic investigation of the controlling factors was conducted, revealing that hydraulic fracture propagation in mixed fine-grained sedimentary rocks is mainly influenced by rock brittleness, natural fractures, stress, varying lithologies, and fracturing parameters. A comprehensive compressibility evaluation standard was established, considering brittleness, stress contrast, and natural fracture density, with weights of 0.3, 0.23, and 0.47. In light of the high brittleness, substantial interlayer stress differences, and localized developing natural microfractures in the Yingxiongling mixed fine-grained sedimentary rock reservoir, this study examined the influence of various construction parameters on the propagation of hydraulic fractures and optimized these parameters accordingly. Based on the practical application in the field, a “three-stage” stimulation strategy was proposed, which involves using high-viscosity fluid in the front to create the main fracture, low-viscosity fluid with sand-laden slugs to create volume fractures, and continuous high-viscosity fluid carried sand to maintain the conductivity of the fracture network. The resulting oil and gas seepage area corresponding to the stimulated reservoir volume (SRV) matched the actual well spacing of 500 m, achieving the effect of full utilization. The understanding of the controlling factors for fracture expansion, the compressibility evaluation standard, and the main process technology developed in this study effectively guide the optimization of transformation programs for mixed fine-grained sedimentary rocks.