The electromagnetic model of a large-bloom continuous casting was established to simulate the magnetic field. The model 3600 digital, high-precision, three-dimensional Gaussian meter was used to measure the internal magnetic field of mold electromagnetic stirring (M-EMS). The distribution of simulated magnetic field was basically consistent with that of the measured magnetic field; the accuracy of electromagnetic stirring model was verified. With the increase of current frequency, the electromagnetic force first increases and then decreases; when the current frequency is 9 Hz, the electromagnetic force reaches its maximum value. A bipolar electromagnetic stirring model is proposed; the influence of current intensity and distance were investigated. With the increase of current intensity of lower mold electromagnetic stirring (M-EMSB), the internal magnetic intensity of upper mold electromagnetic stirring (M-EMSA) gradually increases, and the middle region is gradually filled by magnetic field. With the increase of the distance, the range of the low-intensity magnetic field expands. When the current intensity of the M-EMSB is 320 A, and the distance is 400 mm, an 8 mT uniform magnetic field in the range of 1.2 m is formed. Compared with the traditional continuous casting electromagnetic agitator, the center equiaxial crystal of bipolar electromagnetic agitator increases from 30.3% to 49.5%.