The preparation of ultra-thin CFRP laminates, which incorporate a cycloaliphatic epoxy resin reinforced with polyhedral oligomeric silsesquioxane (POSS) reagent nanofiller, using out-of-autoclave procedure is reported. The influence of the amount of POSS within the laminate on the mechanical properties and surface roughness of the laminates is analysed before and after exposure to atomic oxygen (AO) to simulate the effects of low Earth orbit (LEO). The addition of 5 wt% POSS to the base epoxy leads to an increase in both flexural strength and modulus, but these values begin to fall as the POSS content rises, possibly due to issues with agglomeration. The addition of POSS offers improved resistance against AO degradation with the laminates containing 20 wt% POSS demonstrating the lowest erosion yield (1.67 × 10−24 cm2/atom) after the equivalent of a period of 12 months in a simulated LEO environment. Exposure to AO promotes the formation of a silicon-rich coating layer on the surface of the laminate, which in turn reduces roughness and increases stiffness, as evidenced by measurements of flexural properties and spectral data after exposure.
22 February 2019 in Journal of Mechanisms and Robotics
This paper explores the ability to tailor the mechanical properties of composite compliant shell mechanisms, by exploiting the thermal prestress introduced during the composite laminate cure. An extension of an analytical tape spring model with composite thermal analysis is presented, and the effect of the thermal prestress is studied by means of energy landscapes for the cylindrical composite shells. Tape springs that would otherwise be monostable structures become bistable and exhibit greater ranges of low-energy twisting with thermally induced prestress. Predicted shell geometries are compared with finite element (FE) results and manufactured samples, showing good agreement between all approaches. Wider challenges around the manufacture of prestressed composite compliant mechanisms are discussed.
21 February 2024 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
Optical atomic clocks demonstrate a better stability and lower systematic uncertainty than the highest performance microwave atomic clocks. However, the best performing optical clocks have a large footprint in a laboratory environment and require specialist skills to maintain continuous operation. Growing and evolving needs across several sectors are increasing the demand for compact robust and portable devices at this capability level. In this paper we discuss the design of a physics package for a compact laser-cooled 88 Sr + optical clock that would, with further development, be suitable for space deployment. We review the design parameters to target a relative frequency uncertainty at the low parts in 10 18 with this system. We then explain the results of finite-element modelling to simulate the response of the ion trap and vacuum chamber to vibration, shock and thermal conditions expected during launch and space deployment. Additionally, an electrostatic model has been developed to investigate the relationship between the ion trap geometrical tolerances and the trapping efficiency. We present the results from these analyses that have led to the design of a more robust prototype ready for experimental testing.
1 December 2019 in Journal of the Mechanics and Physics of Solids