Axel Griesche

Dr. Axel Griesche

orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2010 in Review of Scientific Instruments
Verified
Journal Article
Closed access
AGAxel Griesche
Axel Griesche
BZBo Zhang
Bo Zhang
ESE. Solórzano
E. Solórzano
Francisco Garcia-MorenoFrancisco Garcia-Moreno
Francisco Garcia-Moreno
A x-ray radioscopy technique for measuring in situ chemical diffusion coefficients in metallic melts is presented. The long-capillary diffusion measurement method is combined with imaging techniques using microfocus tubes and flat panel detectors in order to visualize and quantitatively analyze diffusive mixing of two melts of different chemical composition. The interdiffusion coefficient as function of temperature and time is obtained by applying Fick’s diffusion laws. Tracking the time dependence of the mean square penetration depth of the mixing process allows to detect changes in the mass transport caused by convective flow. The possibility to sort out convective mass transport contributions from analysis enhances significantly the accuracy compared to the conventional long-capillary diffusion measurement method with postmortem analysis. The performance of this novel diffusion measurement method with x-ray radiography technique is demonstrated by a diffusion experiment in an Al–Ni melt.

1 August 2011 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
KBK. Beyer
K. Beyer
TKT. Kannengiesser
T. Kannengiesser
AGAxel Griesche
Axel Griesche
Burkhard SchillingerBurkhard Schillinger
Burkhard Schillinger

1 January 1998 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
AGAxel Griesche
Axel Griesche
KKK. H. Kraatz
K. H. Kraatz
GFG. Frohberg
G. Frohberg
A graphite shear cell had been developed to measure diffusion coefficients in metal or semiconductor melts. The usable temperature range reaches from the melting point of the material to limits like chemical reaction temperatures with the graphite crucible, respectively, to the vaporization temperature of the liquid. As opposed to existing cells the improvement is in the simple initial shear to start diffusion and the “comb-shearing” process to terminate the diffusion experiment. These mechanisms minimize convection in the melt initialized by the shear movement itself. The reliability of the cell had been verified in diffusion experiments in the system In–Sn, for which microgravity data (without an additional contribution due to gravity-driven natural convection) are present. In addition the mass transport of the pure shearing process had been measured. It was found to be negligible for typical diffusion experiments with t>10 000 s.

10 September 2015 in Physics Procedia
Verified
Journal Article
Open access
PDF file
AGAxel Griesche
Axel Griesche
EDE. Dabah
E. Dabah
TKT. Kannengiesser
T. Kannengiesser
AHAndre Hilger
Andre Hilger
NKNikolay Kardjilov
Nikolay Kardjilov
BSB. Schillinger
B. Schillinger
Neutron tomography has been applied to investigate the mechanism of hydrogen assisted cracking in technical iron and supermartensitic steel. Rectangular technical iron block samples showed blistering due to intense hydrogen charging and the tomographic method revealed in situ the spatial distribution of hydrogen and cracks. Hydrogen accumulated in a small region around cracks and the cracks are filled with hydrogen gas. Cracks close to the surface contained no hydrogen. Hydrogenous tensile test samples of supermartensitic steel were pulled until rupture and showed hydrogen accumulations at the notch base and in the plastically deformed region around the fracture surface.

13 January 2024 in Welding in the World
Verified
Journal Article
Open access
PDF file
LQL. Quackatz
L. Quackatz
AGAxel Griesche
Axel Griesche
JNJ. Nietzke
J. Nietzke
TKT. Kannengiesser
T. Kannengiesser
The ISO 3690 standard “Determination of hydrogen content in arc weld metal” requires a thermal activation of the diffusible hydrogen in a piece of weld metal for the subsequent ex situ concentration measurement by carrier gas hot extraction CGHE or thermal desorption spectroscopy (TCD). Laser-induced breakdown spectroscopy (LIBS) offers a time and spatially resolved, almost non-destructive, in situ measurement of hydrogen at surfaces without sample preparation. We measured hydrogen in steels, which were charged either electrochemically or by high-pressure hydrogen gas, and compared the results. Further, the feasibility of quantitative hydrogen line scan measurements with LIBS was demonstrated by measuring hydrogen at water jet cut surfaces. The hydrogen concentrations measured with the help of LIBS were compared with CGHE measurements. It was observed that hydrogen can be reliably measured with LIBS for concentrations larger than 2 wt.-ppm. The maximum hydrogen concentration achieved using electrochemical charging was 85.1 ppm. The results show that LIBS is a promising technique for time- and spatially resolved measurements of hydrogen in steels.

12 January 2022 in Advanced Engineering Materials
Verified
Journal Article
Open access
PDF file
RLRené Laquai
René Laquai
TSThomas Schaupp
Thomas Schaupp
AGAxel Griesche
Axel Griesche
BMBernd Randolf Müller
Bernd Randolf Müller
AKAndreas Kupsch
Andreas Kupsch
Giovanni BrunoGiovanni Bruno
Giovanni Bruno
While the problem of the identification of mechanisms of hydrogen‐assisted damage has and is being thoroughly studied, the quantitative analysis of such damage still lacks suitable tools. In fact, while, for instance, electron microscopy yields excellent characterization, the quantitative analysis of damage requires at the same time large field‐of‐views and high spatial resolution. Synchrotron X‐ray refraction techniques do possess both features. Herein, it is shown how synchrotron X‐ray refraction computed tomography (SXRCT) can quantify damage induced by hydrogen embrittlement in a lean duplex steel, yielding results that overperform even those achievable by synchrotron X‐ray absorption computed tomography. As already reported in the literature, but this time using a nondestructive technique, it is shown that the hydrogen charge does not penetrate to the center of tensile specimens. By the comparison between virgin and hydrogen‐charged specimens, it is deduced that cracks in the specimen bulk are due to the rolling process rather than hydrogen‐assisted. It is shown that (micro)cracks propagate from the surface of tensile specimens to the interior with increasing applied strain, and it is deduced that a significant crack propagation can only be observed short before rupture.