Metal Manipulation: Reducing the grain size below 100 micrometers can vastly improve the properties of a metal. However, these nanocrystalline metals are not thermally stable; at elevated temperatures the grains will grow and merge. Alloying with a second metal to slow grain growth can slow down this process, which has shown some success on a trial-and-error basis.
Chookajorn
et al. (p. 951 ; see the Perspective by Weertman ) now provide a theoretical framework to create stability maps to identify potential alloys with the greatest thermal stability. For tungsten, counterintuitively, the theory suggests that atoms with the largest size differential or lowest solubility are not the best alloying choice. Indeed, an alloy of tungsten and titanium was processed more easily than pure nanocrystalline tungsten and also showed better stability at high temperatures.
Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design - Volume 28 Issue 16 - Heather A. Murdoch, Christopher A. Schuh
Grain boundary segregation has been established through both simulation and experiments as a successful approach to stabilize nanocrystalline materials against grain growth. However, relatively few alloy systems have been studied in this context; these vary in their efficacy, and in many cases the stabilization effect is compromised by second phase precipitation. Here we address the open-ended design problem of how to select alloy systems that may be stable in a nanocrystalline state. We continue the development of a general “regular nanocrystalline solution” model to identify the conditions under which binary nanocrystalline alloy systems with positive heats of mixing are stable with respect to both grain growth (segregation removes the grain boundary energy penalty) and phase separation (the free energy of the nanocrystalline system is lower than the common tangent defining the bulk miscibility gap). We calculate a “nanostructure stability map” in terms of alloy thermodynamic parameters. Three main regions are delineated in these maps: one where grain boundary segregation does not result in a stabilized nanocrystalline structure, one in which macroscopic phase separation would be preferential (despite the presence of a nanocrystalline state stable against grain growth) and one for which the nanocrystalline state is stable against both grain growth and phase separation. Additional details about the stabilized structures are also presented in the map, which can be regarded as a tool for the design of stable nanocrystalline alloys.United States. Army Research Office (Contract W911NF-09-1-0422)United States. Dept. of Energy. Office of Science (Solid-State Solar-Thermal Energy Conversion Center DE-SC0001299
It is a new beginning for innovative fundamental and applied science in nanocrystalline materials. Many of the processing and consolidation challenges that have haunted nanocrystalline materials are now more fully understood, opening the doors for bulk nanocrystalline materials and parts to be produced. While challenges remain, recent advances in experimental, computational, and theoretical capability have allowed for bulk specimens that have heretofore been pursued only on a limited basis. This article discusses the methodology for synthesis and consolidation of bulk nanocrystalline materials using mechanical alloying, the alloy development and synthesis process for stabilizing these materials at elevated temperatures, and the physical and mechanical properties of nanocrystalline materials with a focus throughout on nanocrystalline copper and a nanocrystalline Cu-Ta system, consolidated via equal channel angular extrusion, with properties rivaling that of nanocrystalline pure Ta. Moreover, modeling and simulation approaches as well as experimental results for grain growth, grain boundary processes, and deformation mechanisms in nanocrystalline copper are briefly reviewed and discussed. Integrating experiments and computational materials science for synthesizing bulk nanocrystalline materials can bring about the next generation of ultrahigh strength materials for defense and energy applications.
Development of ultra-high strength and corrosion-resistant aluminum (Al) alloys is demonstrated by a combination of suitable alloying elements and processing technology able to cause extended solid solubility and nanocrystalline structure. Binary Al-transition metal (M: Cr, Ni, Mo, Si, Ti, Mn, V, Nb) alloys, produced by high-energy ball milling and subsequent cold compaction, have exhibited significantly high hardness and corrosion resistance compared to any commercial Al alloy. The cyclic potentiodynamic polarization tests revealed a significant improvement in pitting and repassivation potentials. X-ray diffraction analysis revealed the grain refinement <100 nm and extended solid solubility. GRAPHICAL ABSTRACT IMPACT STATEMENT High-energy ball-milled Al alloys, owing to excellent corrosion resistance and high hardness, are expected to be a new class of Al alloys and initiate a multidisciplinary research direction.
1 November 2018 in International Journal of Refractory Metals and Hard Materials