Deregulation and privatization actions are creating new problems of control, management and reliability, because of new players and new technologies spreading in distribution systems. Such new scenarios require more comprehensive and accurate knowledge of the system to make control actions efficient and reliable. In particular, attention must be paid to phase angles estimation to avoid critical situations. In this context, the use of phasor measurement units (PMUs) looks promising. This paper presents an efficient branch-current-based distribution systems state estimation. The estimator allows synchronized phasor measurements provided by PMUs to be included. In addition, the branch current state model is extended so that the knowledge of the voltage profile is significantly improved. The estimator is expressed both in polar and rectangular coordinates and a comparison between the obtainable accuracy and computational efficiency is presented. Furthermore, the possibility to treat radial and weakly meshed topology, also in presence of dispersed generation, is analyzed. The results obtained on different distribution networks are presented and discussed.

Electric infrastructures have been pushed forward to handle tasks they were not originally designed to perform. To improve reliability and efficiency, state-of-the-art power grids include improved security, reduced peak loads, increased integration of renewable sources, and lower operational costs. In this framework“, smart grids” are built around bidirectional communication technologies, where “smart meters” communicate with all other entities and collect data from the power grid, offering specific features to each actor playing in the energy marketplace. In this paper, to overcome some of the challenges raised by smart grids and smart meters, we propose a distributed metering infrastructure which provides bidirectional communication, self-configuration, and auto-update capabilities. Our 3-phase smart meters follow the basics Internet-of-Things principles and have the ability to run, either on-board or distributed on the network, multiple algorithms for smart grid management. These algorithms can be freely added, updated, or removed on-the-fly thanks to the auto-update feature of the system. Moreover, to reduce costs and improve scalability, we prove that it is possible to implement our smart meters using only off-the-shelf and inexpensive hardware devices. A digital real-time simulator (i.e., Opal-RT) has been used to assess the capabilities of both the infrastructure and the meter. Our experimental analysis shows that the latency introduced by the data transmission over the Internet is compliant with the limits imposed by the IEC 61850 standard. As a consequence, our architecture does not affect the operational status of the smart grid, making it a viable solution to support the deployment of novel services.

The distribution grid is the infrastructure that transports electrical energy generated by large plants that are long distances away to the final user. A typical distribution grid consists of High-to-Medium Voltage (HV/MV) transformation centers; the MV grid; Medium-to-Low Voltage (MV/LV) transformation centers; and the LV grid, both three-phase and single-phase. Residential and commercial customers are mainly connected to the LV, while large industrial facilities are connected to the MV.

Distribution system state estimation (DSSE) is one of the key elements of the monitoring activity of an active distribution network, and is the basis for every control and management application. The DSSE relies on real measurements collected by the distributed measurement system and on other available information, mainly obtained from historical data that help in obtaining observability. This prior information is necessary to derive the so called pseudomeasurements. Accurate input data are fundamental for an accurate estimation, as well as knowledge on possible correlation in the measured and pseudomeasured data. A degree of correlation can exist in the measured data, due to measurement devices, and among power consumptions or generations of some particular nodes. This paper presents an exhaustive analysis on the influence of correlations on the quality of the estimation. The importance of including correlation in the weighted least square estimation approach is discussed using both traditional and synchronized measurements. Results obtained on a 95-bus distribution network are presented and discussed.

This paper presents a new approach to the distribution system state estimation in wide-area networks. The main goal of this paper is to present a two-step procedure designed to accurately estimate the status of a large-scale distribution network, relying on a distributed measurement system in a multiarea framework. First of all, the network is divided into subareas, according to geographical and/or topological constraints and depending on the available measurement system. Then, in the first step of the estimation process, for each area, a dedicated estimator is used, exploiting all the measurement devices available on the field. In the second step, data provided by local estimators are further processed to refine the knowledge on the operating conditions of the network. To improve the accuracy of the estimation results, correlation arising in the first step estimations has to be suitably evaluated and considered during the second step. Performed analysis shows that existing correlations can be included in the estimation process with very low data exchange among areas, thus involving minimum communication costs. Both first and second steps can be performed in a decentralized way and with parallel processing, thus leading to reduced overall execution times. Test results, obtained on the 123-bus IEEE test network and proving the goodness of the proposed method, are presented and discussed.

The evolution of the power systems towards the smart grid paradigm is strictly dependent on the modernization of distribution grids. To achieve this target, new infrastructures, technologies and applica- tions are increasingly required. This paper presents a smart metering infrastructure that unlocks a large set of possible services aimed at the automation and management of distribution grids. The proposed architecture is based on a cloud solution, which allows the communication with the smart meters from one side and provides the needed interfaces to the distribution grid services on the other one. While a large number of applications can be designed on top of the cloud, in this paper the focus will be on a real-time distributed state estimation algorithm that enables the automatic reconfiguration of the grid. The paper will present the key role of the cloud solution for obtaining scalability, interoperability and flexibility, and for enabling the integration of different services for the automation of the distribution system. The distributed state estimation algorithm and the automatic network reconfiguration will be presented as an example of coordinated operation of different distribution grid services through the cloud