Understanding particle size distribution (PSD) of total suspended sediments in urban runoff is essential for pollutant fate and designing effective stormwater treatment measures. However, the PSDs from different land uses under different weather conditions have yet to be sufficiently studied. This research conducted a six-year water sampling program in 15 study sites to analyze the PSD of total suspended sediments in runoff. The results revealed that the median particle size decreased in the order: paved residential, commercial, gravel lane residential, mixed land use, industrial, and roads. Fine particles less than 125 μm are the dominant particles (over 75%) of total suspended sediments in runoff in Calgary, Alberta, Canada. Roads have the largest percentage of particles finer than 32 μm (49%). Gravel lane residential areas have finer particle sizes than paved residential areas. The results of PSD were compared with previous literature to provide more comprehensive information about PSD from different land uses. The impact of rainfall event types can vary depending on land use types. A long antecedent dry period tends to result in the accumulation of fine particles on urban surfaces. High rainfall intensity and long duration can wash off more coarse particles. The PSD in spring exhibits the finest particles, while fall has the largest percentage of coarse particles. Snowmelt particles are finer for the same land use than that during rainfall events because the rainfall-runoff flows are usually larger than the snowmelt flows.
Hydroelectric energy is an increasingly vital and effective renewable energy for modern society. The protective effect on the water hammer in the pipeline, the operational stability of the hydropower system, and the flow regime in the air-cushion surge chamber (ACSC) are three main problems during the design of the hydropower station with an ACSC. Comprehensively comparing the above issues between the horizontal and vertical ACSCs is meaningful. This study established the one-dimensional (1D) model based on the Method of Characteristics (MOC) under large load disturbances (LLD) and the rigid water column theory under small load disturbances (SLD). At the same time, the three-dimensional (3D) model was built based on the Volume of Fluid (VOF) to obtain a more detailed flow regime in the ACSC under the load acceptance condition. The results showed that the vertical ACSC was superior to the horizontal one for its large safe water depth, smaller maximum air pressure, and more stable flow under LLD. In contrast, the horizontal one was better than the vertical one for its extensive water area to calm the SLD during the transient process and smaller fluctuation of the surge under SLD. This study will provide a reference for a future project on selecting the structure of the ACSC.
Understanding the impact of rainfall characteristics on urban stormwater quality is important for stormwater management. Even though significant attempts have been undertaken to study the relationship between rainfall and urban stormwater quality, the developed knowledge was hard to be applied in commercial stormwater management models. A data mining framework was proposed to study the impacts of rainfall characteristics on stormwater quality. A rainfall type-based calibration approach was proposed to improve water quality model performance. Specifically, the relationship between rainfall characteristics and stormwater quality was studied using principal component analysis and correlation analysis. Rainfall events were classified using a K-means clustering method based on the selected rainfall characteristics. A rainfall type-based (RTB) model was independently calibrated for each rainfall type to obtain optimal parameter sets of stormwater quality models. The results revealed that antecedent dry days, average rainfall intensity, and rainfall duration were the most critical rainfall characteristics affecting the event mean concentrations (EMCs) of total suspended solids, total nitrogen, and total phosphorus, while total rainfall has a negligible relationship. The K-means method effectively clustered the rainfall events into four types that could represent the rainfall characteristics in the study areas. The rainfall type-based calibration approach can considerably improve water quality model accuracy. Compared to the traditional continuous simulation model, the relative error of the RTB model for the simulation was reduced by 11.4% to 16.4% over the calibration period. The calibrated stormwater quality parameters can be transferred to adjacent catchments with similar characteristics.