In order to reveal the reaction mechanism responsible for the spontaneous combustion of water-immersed coal, this study researched the changes in the physical and chemical structures of coal samples before and after water immersion. The results of the specific surface and pore size analyzer test showed that compared with the original coal sample, the microporous (50 nm) increased obviously in the water-immersed coal sample. Also, as the water immersion time increased, the proportion of micropores decreased from 78.5% to 74.2%, while the proportion of macropores increased from 8.5% to 13.4%. The increase in the number of macropores increased the exposure of coal to oxygen. The scanning electron microscopy (SEM) results showed that the surface pore diameter of the water-immersed coal sample increased obviously, the surface of the coal sample was rougher, and the adsorption and diffusion of oxygen were enhanced. The Fourier transform infrared (FTIR) experiment showed that the contents of hydroxyl and aliphatic groups with higher activity in water-immersed coal samples increased significantly. The content of hydroxyl groups increased in lignite, bituminite, and anthracite by 2.7%, 2.27%, and 0.11% respectively, while the contents of aromatic hydrocarbons and oxygen-containing functional groups showed relative decreases. Compared with the original coal, the physical and chemical structure of water-immersed coal changed obviously. Therefore, it was easier for the water-immersed coal to react with oxygen, and it was also prone to spontaneously ignite.
At present, the thermal behavior of lignite and the reaction process of functional groups during secondary oxidation have not been accurately explained. Therefore, the macro thermal behavior and micro characteristics of spontaneous combustion of lignite during secondary oxidation were studied. Coal samples were pre-oxidized to 80 °C, 120 °C, 160 °C, and 200 °C (labeled as raw coal, C-80, C-120, C-160, and C-200, respectively). A thermogravimetric (TG) analyzer and Fourier-Transform Infrared (FTIR) spectrometer were used. The results showed that the high adsorption temperature T1 and critical temperature T2 of C-80 were higher than those of raw coal by 4.41 °C and 11.07 °C, respectively. They indicated that pre-oxidation inhibited the low-temperature oxidation process. The active temperature T4 gradually decreased from C-80 to lower than that of raw coal. The T4 of C-200 was about 20 °C lower than that of raw coal, proving that pre-oxidation accelerated oxygen absorption and the weight-gaining process. The activation energy of pre-oxidized coal samples was significantly lower than that of raw coal samples. The C-80 and C-120 samples had the lowest activation energies: 114.542 kJ/mol and 114.539 kJ/mol, respectively. The content of free hydroxyl groups in pre-oxidized coal samples decreased in general. At C-120, the aliphatic hydrocarbon generation rate significantly increased, and the percentage of peak area continued to increase. During secondary oxidation of C-120 coal samples, various absorption peaks gradually enhanced. Consequently, C-120 was more prone to spontaneous combustion during secondary oxidation.
The teaching buildings in colleges and universities are crowded and prone to accidents. The emergency evacuation capability of these buildings is evaluated by applying the methods of fault tree, entropy weight-logarithmic fuzzy multiobjective programming (E-LFMP) and fuzzy comprehensive evaluation. An index system was constructed using the basic event structure importance of the accident tree, and the influencing factors were more systematic. In order to improve the objectivity and rationality of the evaluation process and results, this study combines the entropy weight method and multi-objective fuzzy logarithmic programming (LFMP) method to form the entropy weight-logarithmic fuzzy multiobjective programming. Consequently, the weights of different levels of index factors were analyzed and calculated, and more comprehensive content was considered. The fuzzy comprehensive evaluation model is established to evaluate the emergency evacuation ability of a teaching building. The maximum membership degree is 0.4025, and the corresponding grade is “general”, indicating that its emergency evacuation ability must be improved. Based on the weight ratio and grade results of indicators in the evaluation model of emergency evacuation capability, safety rectification measures and suggestions were put forward from the aspects of improving information systems, widening evacuation channels and strengthening safety channel maintenance.
1 October 2020 in Environmental Progress & Sustainable Energy