Eco-friendly waste utilization helps in the development of sustainable infrastructures. Recently, researchers have focused on the production of road infrastructures using the circular economy concept of human safety. The objective of this study is to investigate and explore the utilization of optimum polymer waste content for the development of polymer-modified asphalt mixtures using response surface methodology (RSM). RSM based on Box–Behnken design (BBD) was employed to optimize experimental design and included three factors: X1, polymer type; X2, polymer contents; and X3, testing day. The optimized responses determined by the RSM were as follows: MS of 42.98 kN, MF of 5.08 mm, and MQ of 8.66 kN/mm, indicating a favorable and consistent precision in comparison with experimental values. Moreover, the Marshall characteristics of samples prepared with PE were quite improved compared to PET. In conclusion, the incorporation of such polymer wastes in road construction is a sustainable and cost-effective way of improving their engineering properties. This study will help in the development of sustainable road infrastructures supporting human safety and environmentally friendly practices.
Considering disadvantages such as the low thermal stability and environmental pollution of existing gel inhibitors, a green and stable intumescent nanoinhibitor (INI) was prepared and tested. First, polyacrylamide (PAM), nano-silica, and intumescent flame retardant (IFR) were selected as raw materials. The INI was prepared by nanoparticle modification and cross-linking polymerization. Then, the structure and physical properties of INI were tested by Fourier transform infrared spectroscopy, scanning electron microscopy, and rheological experiments. Meanwhile, the inhibition performance of INI was studied through thermogravimetric analysis-Fourier transfer infrared spectroscopy (TGA-FTIR) analysis. The results suggest that the nanomodification improved the dispersibility of INI particles. The addition of modified nano-silica (MNS) and IFR enhances the strength of the reticular structure, thereby improving the transport convenience and covering ability of the INI gel. At high temperatures, IFR can generate a porous foamed carbon layer that further coats the coal. After INI inhibition treatment, the characteristic temperature and activation energy of coal were significantly improved, and the production of carbon monoxide and carbon dioxide decreased. Hence, irrespective of physical properties, physical inhibition performance, or chemical inhibition performance, INI performed well. Research results can provide valuable references for the preparation and performance study of a coal spontaneous combustion inhibitor.