Manipulators with multi degree-of-freedom (DOF) are widely used for the peg-in-hole task. Compared with manipulators, six-legged robots have better mobility performance apart from completing operational tasks. However, there are nearly no previous studies of six-legged robots performing the peg-in-hole task. In this article, a peg-in-hole approach for six-legged robots is studied and experimented with a six-parallel-legged robot. Firstly, we propose a method whereby a vision sensor and a force/torque (F/T) sensor can be used to explore the relative location between the hole and peg. According to the visual information, the robot can approach the hole. Next, based on the force feedback, the robot plans the trajectory in real time to mate the peg and hole. Then, during the insertion, admittance control is implemented to guarantee the smooth insertion. In addition, during the whole assembly process, the peg is held by the gripper and attached to the robot body. Connected to the body, the peg has sufficient workspace and six DOF to perform the assembly task. Finally, experiments were conducted to prove the suitability of the approach.
Calculating the maximum obstacle-crossing ability accurately at the mechanism design stage can better ensure that the manufactured robot prototype meets the predefined indices. The obstacle-crossing task of the legged robot is achieved by the collaborative movement of the leg and body. The reachable workspace constrains the spatial movement boundary of the foot tip and the robot body. The reachable workspace of the foot tip is invariant, while the shape and volume of the reachable body workspace vary with the supporting footholds. In this study, the body movement is modeled as a six-bar mechanism, and the reachable body workspace means the reachable region of the specified target point located on the moving platform of the six-bar mechanism. Unlike the previous work, the analytical method of calculating the reachable workspace for the target point outside the moving platform, named the external target point, is further studied. The influence of supporting footholds and shank-ground interference on the reachable body workspace is considered. The selection of supporting footholds, the collaborative motion sequences of the robot body and legs, and the determination of the maximum ability for crossing a ditch and climbing a step are demonstrated as cases of implementing the analytical reachable body workspace for the internal target point and the external target point, respectively. Finally, simulations verify the correctness of the theoretical analysis.
8 October 2022 in Journal of Intelligent & Robotic Systems
Legged robots have advanced potential in mobility compared with wheeled or tracked vehicles in harsh environment. In real applications, both environmental perception and terrain identification play an important role in ensuring the safety of the robot. However, few papers involve the obstacle avoidance and terrain identification methods for legged robots. An obstacle avoidance and terrain identification method is proposed in this paper. Firstly, a novel dynamic obstacle avoidance motion planning is proposed which takes full account of the motion ability of the robot. Secondly, a terrain identification method is proposed. The robot can distinguish typical terrains like flat floor, step-on, step-down, ditch and so on. Besides, the ground properties like stiffness are identified to improve the performance of the robot. Finally, the proposed method is integrated on hexapod robots and tested by real experiments which show the method effective. Our methods and experimental results can be a valuable reference for other legged robots.